参数资料
| 型号： | X9448WV24I |
| 厂商： | Intersil |
| 文件页数： | 1/19页 |
| 文件大小： | 0K |
| 描述： | IC DUAL PROG COMP 10K 24TSSOP |
| 标准包装： | 75 |
| 系列： | XDCP™ |
| 接片： | 64 |
| 电阻（欧姆）： | 10k |
| 电路数： | 2 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | I²C（设备位址） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 管件 |
1
FN8201.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
X9448
Mixed Signal with 2-Wire Interface
Dual Digitally Controlled Potentiometer
(XDCP) & Voltage Comparator
FEATURES
Two digitally controlled potentiometers and two
voltage comparators in one package
2-wire serial interface
Register oriented format
—Direct read/write wiper position
—Store as many as four positions per pot
Fast response comparator
Enable, latch, or shutdown comparator outputs
through ACR
Auto-recall of WCR and ACR data from R0
Hardware write protection, WP
Separate analog and digital/system supplies
Direct write cell
—Endurance–100,000 data changes per bit per
register
—Register data retention–100 years
16-bytes of EEPROM memory
Power saving feature and low noise
Two 10k
or two 2.5k potentiometers
Resolution: 64 taps each pot
24-lead TSSOP and 24-lead SOIC packages
DESCRIPTION
The X9448 integrates two nonvolatile digitally con-
trolled potentiometers (XDCP) and two voltage com-
parators on a CMOS monolithic microcircuit.
The X9448 contains two resistor arrays, each com-
posed of 63 resistive elements. Between each ele-
ment and at either end are tap points accessible to the
wiper elements. The position of the wiper element on
the array is controlled by the user through the two wire
serial bus interface.
Each potentiometer has an associated voltage com-
parator. The comparator compares the external input
voltage VNI with the wiper voltage VW and sets the out-
put voltage level to a logic high or low.
Each resistor array and comparator has associated
with it a wiper counter register (WCR), analog control
register (ACR), and eight 6-bit data registers that can
be directly written and read by the user. The contents
of the wiper counter register controls the position of
the wiper on the resistor array. The contents of the
analog control register controls the comparator and its
output. The potentiometer is programmed with a
2-wire serial interface.
BLOCK DIAGRAM
VOUT (0,1)
(R0-R3)0,1
Interface
and
Control
Circuitry
SCL
SDA
A0
A1
A2
A3
VH (0,1)
VL (0,1)
WP
VW (0,1)
VNI (0,1)
+
–
WCR0,1
(R0-R3)0,1
ACR0,1
Data Sheet
April 18, 2005
OBS
OLE
TE P
ROD
UCT
POS
SIBL
E SU
BST
ITUT
E PR
ODU
CT
X941
8
相关PDF资料 |
PDF描述 |
|---|---|
| X9440WV24I | IC DUAL PROG COMP 10K 24TSSOP |
| X9440WS24 | IC DUAL PROG COMP 10K 64TP SO24 |
| X9448WS24-2.7 | IC DUAL PROG COMP 10K 64TP SO24 |
| CDP68HC68T1M2 | IC RTC 32X8 NVSRAM CMOS 16-SOIC |
| X9448WS24 | IC DUAL PROG COMP 10K 64TP SO24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9448WV24I-2.7 | 功能描述:IC DUAL PROG COMP 10K 24TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 35 ppm/°C 存储器类型:非易失 接口:3 线串口 电源电压:2.7 V ~ 5.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN-EP（3x3） 包装:剪切带 (CT) 产品目录页面:1399 (CN2011-ZH PDF) 其它名称:MAX5423ETA+TCT |
| X9448YP24 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Mixed Signal with 2-Wire Interface |
| X9448YP24-2.7 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Mixed Signal with 2-Wire Interface |
| X9448YP24I | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Mixed Signal with 2-Wire Interface |
| X9448YP24I-2.7 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Mixed Signal with 2-Wire Interface |
发布紧急采购，3分钟左右您将得到回复。