- 您现在的位置：买卖IC网 > PDF目录376449 > X96011V14I (INTERSIL CORP) Temperature Sensor with Look Up Table Memory and DAC PDF资料下载
参数资料
| 型号： | X96011V14I |
| 厂商： | INTERSIL CORP |
| 元件分类： | 温度/湿度传感器 |
| 英文描述： | Temperature Sensor with Look Up Table Memory and DAC |
| 中文描述： | DIGITAL TEMP SENSOR-SERIAL, 8BIT(s), 2Cel, RECTANGULAR, SURFACE MOUNT |
| 封装： | PLASTIC, TSSOP-14 |
| 文件页数： | 10/23页 |
| 文件大小： | 335K |
| 代理商： | X96011V14I |
10
FN8215.1
October 25, 2005
PRINCIPLES OF OPERATION
CONTROL AND STATUS REGISTERS
The Control and Status Registers provide the user
with a mechanism for changing and reading the value
of various parameters of the X96011. The X96011
contains five Control, one Status, and several
Reserved registers, each being one Byte wide (See
Figure 4). The Control registers 0 through 6 are
located at memory addresses 80h through 86h
respectively. The Status register is at memory address
87h, and the Reserved registers at memory address
82h, 84h, and 88h through 8Fh.
All bits in Control register 6 always power-up to the logic
state “0”. All bits in Control registers 0 through 5 power-
up to the logic state value kept in their corresponding
nonvolatile memory cells. The nonvolatile bits of a reg-
ister retain their stored values even when the X96011 is
powered down, then powered back up. The nonvolatile
bits in Control 0 through Control 5 registers are all pre-
programmed to the logic state “0” at the factory, except
the cases that indicate “1” in Figure 1.
Bits indicated as “Reserved” are ignored when read,
and must be written as “0”, if any Write operation is
performed to their registers.
A detailed description of the function of each of the
Control and Status register bits follows:
Control Register 0
This register is accessed by performing a Read or
Write operation to address 80h of memory.
ADC
FILT
O
FF
: ADC F
ILTERING
C
ONTROL
(N
ON
-
VOLATILE
)
When this bit is “1”, the status register at 87h is
updated after every conversion of the ADC. When this
bit is “0” (default), the status register is updated after
four consecutive conversions with the same result, on
the 6 MSBs.
NV13: C
ONTROL
REGISTERS
1
AND
3
VOLATILITY
MODE
SELECTION
BIT
(N
ON
-
VOLATILE
)
When the NV13 bit is set to “0” (default), bytes written
to Control registers 1 and 3 are stored in volatile cells,
and their content is lost when the X96011 is powered
down. When the NV13 bit is set to “1”, bytes written to
Control registers 1 and 3 are stored in both volatile
and nonvolatile cells, and their value doesn’t change
when the X96011 is powered down and powered back
up. See “Writing to Control Registers” on page 21.
IDS: C
URRENT
G
ENERATOR
D
IRECTION
S
ELECT
B
IT
(N
ON
-
VOLATILE
)
The IDS bit sets the polarity of the Current Generator.
When this bit is set to “0” (default), the Current Gener-
ator of the X96011 is configured as a Current Source.
The Current Generator is configured as a Current Sink
when the IDS bit is set to “1”. See Figure 5.
X96011
相关PDF资料 |
PDF描述 |
|---|---|
| X96011V14IZ | Temperature Sensor with Look Up Table Memory and DAC |
| X96012V14I | Universal Sensor Conditioner with Dual Look Up Table Memory and DACs |
| X96012 | Universal Sensor Conditioner with Dual Look-up Table Memory and DACs(通用传感器调节器，带双查找表存储器及DACs) |
| X98014L128-3.3-Z | 140MHz Triple Video Digitizer with Digital PLL |
| X98014L128-3.3 | 140MHz Triple Video Digitizer with Digital PLL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X96011V14IZ | 功能描述:IC SENSOR TEMP BIAS SGL 14-TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热管理 系列:- 标准包装:1 系列:- 功能:温度监控系统（传感器） 传感器类型:内部和外部 感应温度:-40°C ~ 125°C，外部传感器 精确度:±2.5°C 本地（最大值），±5°C 远程（最大值） 拓扑:ADC，比较器，寄存器库 输出类型:2 线 SMBus? 输出警报:无 输出风扇:无 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 供应商设备封装:SOT-23-8 包装:Digi-Reel® 其它名称:296-22675-6 |
| X96012 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Universal Sensor Conditioner with Dual Look-up Table Memory and DACs |
| X96012_08 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Universal Sensor Conditioner with Dual Look-up Table Memory and DACs |
| X96012V14I | 功能描述:IC CNTRLR UNIV MEM/DAC 14-TSSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 传感器和探测器接口 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:74 系列:- 类型:触控式传感器 输入类型:数字 输出类型:数字 接口:JTAG，串行 电流 - 电源:100µA 安装类型:表面贴装 封装/外壳:20-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:20-TSSOP 包装:管件 |
| X96012V14IZ | 功能描述:板上安装温度传感器 UNIVERSAL SENSOR CONDITIO W/DL LOOKUP RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
发布紧急采购，3分钟左右您将得到回复。