参数资料
| 型号： | X9C104SZ |
| 厂商： | Intersil |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | IC XDCP 100-TAP 100K EE 8-SOIC |
| 标准包装： | 100 |
| 系列： | XDCP™ |
| 接片： | 100 |
| 电阻（欧姆）： | 100k |
| 电路数： | 1 |
| 温度系数： | 标准值 ±300 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 3 线串行（芯片选择，递增，增/减） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
7
FN8222.3
July 20, 2009
Instructions and Programming
The INC, U/D and CS inputs control the movement of the
wiper along the resistor array. With CS set LOW, the device is
selected and enabled to respond to the U/D and INC inputs.
HIGH to LOW transitions on INC will increment or decrement
(depending on the state of the U/D input) a 7-bit counter. The
output of this counter is decoded to select one of one-hundred
wiper positions along the resistive array.
The value of the counter is stored in non-volatile memory
whenever CS transitions HIGH while the INC input is also
HIGH.
The system may select the X9Cxxx, move the wiper and
deselect the device without having to store the latest wiper
position in non-volatile memory. After the wiper movement is
performed as previously described and once the new
position is reached, the system must keep INC LOW while
taking CS HIGH. The new wiper position will be maintained
until changed by the system or until a power-down/up cycle
recalled the previously stored data.
This procedure allows the system to always power-up to a
pre-set value stored in non-volatile memory; then during
system operation, minor adjustments could be made. The
adjustments might be based on user preference, i.e.: system
parameter changes due to temperature drift, etc.
The state of U/D may be changed while CS remains LOW.
This allows the host system to enable the device and then
move the wiper up and down until the proper trim is attained.
Symbol Table
Performance Characteristics
Contact the factory for more information.
Applications Information
Electronic digitally controlled (XCDP) potentiometers provide
three powerful application advantages:
1. The variability and reliability of a solid-state
potentiometer.
2. The flexibility of computer-based digital controls.
3. The retentivity of non-volatile memory used for the
storage of multiple potentiometer settings or data.
Mode Selection
CS
INC
U/D
MODE
L
H
Wiper Up
L
Wiper Down
H
X
Store Wiper Position
H
X
Standby Current
L
X
No Store, Return to Standby
L
H
Wiper Up (not recommended)
L
Wiper Down (not recommended)
WAVEFORM
INPUTS
OUTPUTS
Must be
steady
Will be
steady
May change
from Low to
High
Will change
from Low to
High
May change
from High to
Low
Will change
from High to
Low
Don’t Care:
Changes
Allowed
Changing:
State Not
Known
N/A
Center Line
is High
Impedance
X9C102, X9C103, X9C104, X9C503
相关PDF资料 |
PDF描述 |
|---|---|
| MS3450L24-7SZ | CONN RCPT 16POS WALL MNT W/SCKT |
| CAT5113LI-00-G | IC POT DIGITL 100K 100TAP 8DIP |
| MS3450L24-7SY | CONN RCPT 16POS WALL MNT W/SCKT |
| CAT5113LI-50-G | IC POT DIGITL 50K 100TAP 8DIP |
| MS3450L24-7SX | CONN RCPT 16POS WALL MNT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9C104SZT1 | 功能描述:IC XDCP 100-TAP 100K EE 8-SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:256 电阻（欧姆）:100k 电路数:2 温度系数:标准值 35 ppm/°C 存储器类型:易失 接口:6 线串行（芯片选择，递增，增/减） 电源电压:2.6 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
| X9C303 | 制造商:XICOR 制造商全称:Xicor Inc. 功能描述:Digitally Controlled Potentiometer (XDCP) |
| X9C303_07 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Logarithmic Digitally Controlled Potentiometer |
| X9C303_09 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Logarithmic Digitally Controlled Potentiometer |
| X9C303P | 功能描述:IC DCP 32K 100TP LOG TAPR 8DIP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:XDCP™ 标准包装:2,500 系列:XDCP™ 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 ±300 ppm/°C 存储器类型:非易失 接口:I²C（设备位址） 电源电压:2.7 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。