- 您现在的位置：买卖IC网 > PDF目录18740 > XC09-009PKC-R (Digi International/Maxstream)MODEM RF 900MHZ RS232/485 PDF资料下载
参数资料
| 型号： | XC09-009PKC-R |
| 厂商： | Digi International/Maxstream |
| 文件页数： | 29/39页 |
| 文件大小： | 0K |
| 描述： | MODEM RF 900MHZ RS232/485 |
| 标准包装： | 1 |
| 系列： | 9XCite OEM 模块 |
| 频率： | 900MHz |
| 数据传输率 - 最大： | 9.6kbps |
| 调制或协议： | FHSS，FSK |
| 功率 - 输出： | 6dBm |
| 灵敏度： | -108dBm |
| 电源电压： | 2.85 V ~ 5.5 V |
| 电流 - 接收： | 45mA |
| 电流 - 传输： | 55mA |
| 数据接口： | 连接器，母型 DB-9 |
| 天线连接器： | RP-SMA |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 模块 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页当前第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页
9XCite ‐ PKG ‐ R? ? RS ‐ 232/485 ? RF ? Modem ? – ? Product ? Manual ? v2.1 ? [2007.01.04]
MK (Address Mask) Command
<AT Command: Networking> MK Command is used to set the radio modem address mask. All RF
packets contain the Destination Address of the transmitting radio modem. When an RF packet is
received, the transmitter's Destination Address is logically "ANDed" (bitwise) with the Address
Mask of the receiver. The resulting value must match the Destination Address or the Address Mask
of the receiver for the packet to be received and sent out the receiving modem serial port. If the
"ANDed" value does not match either the Destination Address or the Address Mask of the receiver,
the packet is discarded. (All "0" values are treated as "irrelevant" values and ignored.)
AT Command: MK
Parameter Range: 0 - 0xFFFF
# of bytes returned: 2
Default Parameter Value: 0xFFFF (When set to this value, the Destination Address of the trans-
mitter must exactly match the Destination Address of the receiver.)
Related Commands: DT (Destination Address), HP (Channel)
NB (Parity) Parameter
<Non-AT Settable Parameter: Serial Interfacing>
NB Parameter allows parity for the modem to be
changed. Parity is an error detection method in
Parameter Ranges: 0 - 4
Parameter
Configuration
which a bit (0 or 1) is added to each group of bits
so that it will have either an odd number of 1's or
an even number of 1's. For example, if parity is
odd, then any group of bits that arrives with an
even number of 1's must contain an error.
0
1
2
3
4
8-bit (no parity) or 7-
bit (with any parity)
8-bit even parity
8-bit odd parity
8-bit mark parity
8-bit space parity
Default Parameter Value: 0
Number of bytes returned: 1
PW (Pin Wake-up) Parameter
<Non-AT Settable Parameter: Sleep (Low
Power)> Under normal operation, a radio modem
in Cyclic Sleep Mode cycles from an active state to
a low-power state at regular intervals until data is
ready to be received. If PW Parameter is set to 1,
the SLEEP Pin (Pin 2 of the embedded OEM RF
Module) can be used to awaken the modem from
Cyclic Sleep. If the SLEEP Pin is de-asserted
Parameter Ranges: 0 - 1
Parameter Configuration
0 disabled
1 enabled
Default Parameter Value: 0
Number of bytes returned: 1
(low), the radio modem will be fully operational
and will not go into Cyclic Sleep. Once SLEEP is asserted, the radio modem will remain active for
the period of time specified by ST (Time before Sleep) Command, and will return to Cyclic Sleep
Mode (if no data is ready to be transmitted). PW Command is only valid if Cyclic Sleep has been
enabled using SM Command.
RE (Restore Defaults) Command
<AT Command: AT Command Options> RE Command restores all AT-settable parameters to fac-
tory default settings. However, RE Command will not write the default values to non-volatile mem-
ory. Unless the WR (Write) Command is issued after the RE Command, the default settings will not
be saved in the event of radio modem reset or power-down.
AT Command: RE
Related Command: WR (Write)
? ? 2007 ? MaxStream, ? Inc.
????? 29
相关PDF资料 |
PDF描述 |
|---|---|
| ZIC2410FG72 | RF TRANSCEIVERS |
| FI168B245001-T | FILTER BANDPASS W-LAN BLUETOOTH |
| M4L-2-10 | XFRMR 115V 8.7A 1000VA |
| GLDC06D | SWITCH TOP ROLLER ARM SLO ACT |
| GLDA03D | SWITCH TOP ROLLER ARM SLO ACT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XC09-009PKC-RA | 功能描述:射频模块 9XCITE 4MW 9600 BAUD R RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| XC09-009PKC-U | 功能描述:射频模块 9XCite 4mW 9600baud USB no acc RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| XC09-009PKC-UA | 功能描述:射频模块 900MHzmW, 9600 Baud BAUD RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| XC09-009PKI-R | 功能描述:射频模块 9XCite 4mW 9600baud RS232/485 no acc RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| XC09-009PKI-RA | 功能描述:射频模块 9XCite 4mW 9600baud RS232/485 RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
发布紧急采购，3分钟左右您将得到回复。