参数资料
型号: XC09-038PKT-RA
厂商: Digi International/Maxstream
文件页数: 27/39页
文件大小: 0K
描述: MODEM RF 900MHZ RS232/485 W/ACC
标准包装: 1
系列: 9XCite OEM 模块
频率: 900MHz
数据传输率 - 最大: 38.4kbps
调制或协议: FHSS,FSK
功率 - 输出: 6dBm
灵敏度: -104dBm
电源电压: 2.85 V ~ 5.5 V
电流 - 接收: 45mA
电流 - 传输: 55mA
数据接口: 连接器,母型 DB-9
天线连接器: RP-SMA
工作温度: -40°C ~ 85°C
封装/外壳: 模块
9XCite ‐ PKG ‐ R? ? RS ‐ 232/485 ? RF ? Modem ? – ? Product ? Manual ? v2.1 ? [2007.01.04]
HT (Time before Wake-up Initializer) Parameter
<Non-AT Settable Parameter: Sleep (Low Power)> If any modems within range are running in a
"Cyclic Sleep Setting", a wake-up initializer must be sent by the transmitter for the other radio
modems to synchronize to the transmitter [see LH ("Wake-up Initializer Timer") Command]. When
a receiving radio modem in Cyclic Sleep wakes, it must detect the wake-up initializer portion of the
RF packet in order to synchronize to the transmitter and receive data. HT Parameter sets time
period of inactivity (no serial or RF data is sent or received) before a Wake-up Initializer is sent.
Base station tracks awake-status of remote radios. HT of base radio should be set shorter than ST
(Time before Sleep) of remote radios.
From the receiver perspective, after "HT" time elapses and the ST (Time before Sleep) Parameter
is met, the receiver goes into cyclic sleep. Once in cyclic sleep, the radio modem must first detect
the wake-up initializer and synchronize to the transmitter before it can receive data. Thus, when
time "HT" time elapses, the transmitter then knows it needs to send a long wake-up initializer for
all receivers to be able to synchronize to its next transmission. Matching "HT" to the "ST" time on
the receiver(s) guarantees that all receivers will detect the next transmission.
Parameter Range: 0 - 0xFFFF [x 100 ms]
# of bytes returned: 2
Default Parameter Value: 0xFFFF (long wake-up initializer will not be sent)
Related Parameters: LH (Wake-up Initializer Timer), SM (Sleep Mode), ST (Time before Sleep)
HV (Hardware Version) Command
<AT Command: Diagnostic> Reads and returns the hardware version of the modem.
AT Command: HV
Parameter Range: 0 - 0xFFFF [Read-only]
# of bytes returned: 2
ID (Modem VID) Parameter
<Non-AT Settable Parameter: Networking> ID Parameter reads and edits the modem's VID. VID is
a MaxStream-specific acronym that stands for "Vendor Identification Number". RF modems can
only communicate with other modems having the same VID.
Parameter Range: 0 - 0x7FFF (above this range is Read-only)
# of bytes returned: 2
Default Parameter Value: 0x3332
? ? 2007 ? MaxStream, ? Inc.
????? 27
相关PDF资料
PDF描述
XC0900A-03S COUPLER 90DEG 811-1000MHZ 3DB
XC1900A-03S COUPLER 90DEG 1700-2000MHZ 3DB
XC2401A8167R-G IC GPS LNA 1.6GHZ USPN-4B02
XC2404A816UR-G IC GPS LNA 1.6GHZ USP-8A01
XE112 LAMP T3-1/4 WITH XE GAS WHITE
相关代理商/技术参数
参数描述
XC09-038WNC 功能描述:射频模块 9XCite 4mW transcei e antenna 38400 bps RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
XC09-038WNI 功能描述:射频模块 9XCite 4mW transcei e antenna 38400 bps RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
XC-09-201-S 制造商:FLOYD BELL 功能描述:Alarm, Piezoelectric, 82 dBA to 103 dBA @ 2 Ft.,Extra Loud Continuous, 30-120VAC
XC-09-212-S 制造商:FLOYD BELL 功能描述:EXTRA LOUD CONTINUOUS, PANEL MOUNT CASE AND QUICK CONNECT BLADES WITH SCREWS TER
XC-09-212-SR 制造商:FLOYD BELL 功能描述:Alarm, Piezoelectric, 82 dBA to 103 dBA @ 2 Ft., Extra Loud Continuous, 2-12VDC