参数资料
| 型号： | XC6SLX45-2FGG676I |
| 厂商： | Xilinx Inc |
| 文件页数： | 7/11页 |
| 文件大小： | 0K |
| 描述： | IC FPGA SPARTAN 6 43K 676FGGBGA |
| 标准包装： | 1 |
| 系列： | Spartan® 6 LX |
| LAB/CLB数： | 3411 |
| 逻辑元件/单元数： | 43661 |
| RAM 位总计： | 2138112 |
| 输入/输出数： | 358 |
| 电源电压： | 1.14 V ~ 1.26 V |
| 安装类型： | 表面贴装 |
| 工作温度： | -40°C ~ 100°C |
| 封装/外壳： | 676-BGA |
| 供应商设备封装： | 676-FBGA（27x27） |
Spartan-6 Family Overview
DS160 (v2.0) October 25, 2011
Product Specification
5
Clock Management
Each Spartan-6 FPGA has up to six CMTs, each consisting of two DCMs and one PLL, which can be used individually or
cascaded.
DCM
The DCM provides four phases of the input frequency (CLKIN): shifted 0°, 90°, 180°, and 270° (CLK0, CLK90, CLK180, and
CLK270). It also provides a doubled frequency CLK2X and its complement CLK2X180. The CLKDV output provides a
fractional clock frequency that can be phase-aligned to CLK0. The fraction is programmable as every integer from 2 to 16,
as well as 1.5, 2.5, 3.5 . . . 7.5. CLKIN can optionally be divided by 2. The DCM can be a zero-delay clock buffer when a clock
signal drives CLKIN, while the CLK0 output is fed back to the CLKFB input.
Frequency Synthesis
Independent of the basic DCM functionality, the frequency synthesis outputs CLKFX and CLKFX180 can be programmed to
generate any output frequency that is the DCM input frequency (FIN) multiplied by M and simultaneously divided by D, where
M can be any integer from 2 to 32 and D can be any integer from 1 to 32.
Phase Shifting
With CLK0 connected to CLKFB, all nine CLK outputs (CLK0, CLK90, CLK180, CLK270, CLK2X, CLK2X180, CLKDV,
CLKFX, and CLKFX180) can be shifted by a common amount, defined as any integer multiple of a fixed delay. A fixed DCM
delay value (fraction of the input period) can be established by configuration and can also be incremented or decremented
dynamically.
Spread-Spectrum Clocking
The DCM can accept and track typical spread-spectrum clock inputs, provided they abide by the input clock specifications
listed in the Spartan-6 FPGA Data Sheet: DC and Switching Characteristics. Spartan-6 FPGAs can generate a spread-
spectrum clock source from a standard fixed-frequency oscillator.
PLL
The PLL can serve as a frequency synthesizer for a wider range of frequencies and as a jitter filter for incoming clocks in
conjunction with the DCMs. The heart of the PLL is a voltage-controlled oscillator (VCO) with a frequency range of
400 MHz to 1,080 MHz, thus spanning more than one octave. Three sets of programmable frequency dividers (D, M, and O)
adapt the VCO to the required application.
The pre-divider D (programmable by configuration) reduces the input frequency and feeds one input of the traditional PLL
phase comparator. The feedback divider (programmable by configuration) acts as a multiplier because it divides the VCO
output frequency before feeding the other input of the phase comparator. D and M must be chosen appropriately to keep the
VCO within its controllable frequency range.
The VCO has eight equally spaced outputs (0°, 45°, 90°, 135°, 180°, 225°, 270°, and 315°). Each can be selected to drive
one of the six output dividers, O0 to O5 (each programmable by configuration to divide by any integer from 1 to 128).
Clock Distribution
Each Spartan-6 FPGA provides abundant clock lines to address the different clocking requirements of high fanout, short
propagation delay, and extremely low skew.
Global Clock Lines
In each Spartan-6 FPGA, 16 global-clock lines have the highest fanout and can reach every flip-flop clock. Global clock lines
must be driven by global clock buffers, which can also perform glitchless clock multiplexing and the clock enable function.
Global clocks are often driven from the CMTs, which can completely eliminate the basic clock distribution delay.
I/O Clocks
I/O clocks are especially fast and serve only the localized input and output delay circuits and the I/O serializer/deserializer
(SERDES) circuits, as described in the I/O Logic section.
相关PDF资料 |
PDF描述 |
|---|---|
| 25LC160AT-I/ST | IC EEPROM 16KBIT 10MHZ 8TSSOP |
| XC3SD1800A-5FGG676C | SPARTAN-3ADSP FPGA 1800K 676FBGA |
| 25LC160AT-I/MS | IC EEPROM 16KBIT 10MHZ 8MSOP |
| XC3SD1800A-5FG676C | SPARTAN-3ADSP FPGA 1800K 676FBGA |
| 25LC080BT-E/SN | IC EEPROM 8KBIT 10MHZ 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XC6SLX45-3CSG324C | 功能描述:IC FPGA SPARTAN 6 43K 324CSGBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA（现场可编程门阵列） 系列:Spartan® 6 LX 标准包装:40 系列:Spartan® 6 LX LAB/CLB数:3411 逻辑元件/单元数:43661 RAM 位总计:2138112 输入/输出数:358 门数:- 电源电压:1.14 V ~ 1.26 V 安装类型:表面贴装 工作温度:-40°C ~ 100°C 封装/外壳:676-BGA 供应商设备封装:676-FBGA（27x27） |
| XC6SLX45-3CSG324I | 功能描述:IC FPGA SPARTAN 6 43K 324CSGBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA（现场可编程门阵列） 系列:Spartan® 6 LX 标准包装:40 系列:Spartan® 6 LX LAB/CLB数:3411 逻辑元件/单元数:43661 RAM 位总计:2138112 输入/输出数:358 门数:- 电源电压:1.14 V ~ 1.26 V 安装类型:表面贴装 工作温度:-40°C ~ 100°C 封装/外壳:676-BGA 供应商设备封装:676-FBGA（27x27） |
| XC6SLX45-3CSG484C | 功能描述:IC FPGA SPARTAN 6 43K 484CSGBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA（现场可编程门阵列） 系列:Spartan® 6 LX 标准包装:24 系列:ECP2 LAB/CLB数:1500 逻辑元件/单元数:12000 RAM 位总计:226304 输入/输出数:131 门数:- 电源电压:1.14 V ~ 1.26 V 安装类型:表面贴装 工作温度:0°C ~ 85°C 封装/外壳:208-BFQFP 供应商设备封装:208-PQFP（28x28） |
| XC6SLX45-3CSG484I | 功能描述:IC FPGA SPARTAN 6 43K 484CSGBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA（现场可编程门阵列） 系列:Spartan® 6 LX 标准包装:40 系列:Spartan® 6 LX LAB/CLB数:3411 逻辑元件/单元数:43661 RAM 位总计:2138112 输入/输出数:358 门数:- 电源电压:1.14 V ~ 1.26 V 安装类型:表面贴装 工作温度:-40°C ~ 100°C 封装/外壳:676-BGA 供应商设备封装:676-FBGA（27x27） |
| XC6SLX45-3FG484C | 制造商:Xilinx 功能描述:FPGA SPARTAN?-6 FAMILY 43661 CELLS 45NM (CMOS) TECHNOLOGY 1. - Trays 制造商:Xilinx 功能描述:IC FPGA SPARTAN 6 45K 484BGA 制造商:Xilinx 功能描述:IC FPGA 316 I/O 484FBGA |
发布紧急采购，3分钟左右您将得到回复。