参数资料
型号: XF2J-1024-11A-R100
厂商: Omron Electronics Inc-EMC Div
文件页数: 26/28页
文件大小: 0K
描述: CONNECTOR FPC 10POS 0.5MM SMD
产品培训模块: FPC Connectors
标准包装: 100
系列: XF2J
连接器类型: 垂直触点,单面
位置数: 10
间距: 0.020"(0.50mm)
FFC,FCB 厚度: 0.30mm
板上方高度: 0.163"(4.15mm)
安装类型: 表面贴装
线缆端类型: 锥形
端子: 焊接
锁定功能: 滑锁
特点: 零插入力(ZIF)
包装: 散装
触点表面涂层:
触点涂层厚度: 5.9µin(0.15µm)
工作温度: -30°C ~ 85°C
额定电流: 0.500A
额定电压: 50V
体座材料: 聚酰胺(PA46),尼龙 4/6
其它名称: XF2J102411AR100
XF
Mounting
1. Do not perform reflow or manual soldering with the FPC
inserted in the connector and the slider (lever) in the
locked position. Doing so may result in contact failure.
2. The reflow conditions are as stated in OMRON’s specifi-
cations and guidelines. These conditions, however,
depend on the type of solder, the manufacturer, the
amount of solder, the size of the circuit board, and the
other mounting materials. Confirm the mounting condi-
tions before proceeding.
Designing
1. Gently pull out the FPC taking care not to apply force
directly to the connector. Bending the FPC in the area
where it enters the connector or applying force to the FPC
itself may result in contact failure.
2. When installing the FPC at a location or on equipment
that will subject the FPC to repeated vibration or move-
ment, secure the FPC prior to use.
3. Use the FPCs that conform to the appropriate specifica-
tions and size as stated by OMRON. When using a differ-
ent FPC, or an F/F, contact OMRON.
4. Use the same metal for the FPC plating and the connec-
tor plating.
5. “Whiskers” may protrude from the FPC film of some lead-
free FPCs. Be careful when using these units.
6. Make sure that the metal mask thickness is within the
appropriate specifications and size as stated by OMRON.
The recommended metal mask open area is 90% of the
printed circuit board mating dimensions given in the
dimensions diagrams.
Lead-Free Solder
To comply with the prohibition of lead use stipulated by the RoHS Directive, SnPb solder plating
FPC connectors must be lead free. OMRON implemented the plan to end production of solder
plating as of March 2006. Instead of solder plating (SnPb) connectors, OMRON is providing re-
flow (Sn) plating connectors* with whisker prevention and Gold (Au) plating connectors.
* Applicable Models
XF2M- ■ ■ 15-1L
XF2L- ■ ■ ■ 5-1
XF2J- ■ ■ 24-1 ■
Precautions
- “Whiskers” may occur on the FPC ?lm when using lead-free solder. Check for “whiskers” before
using the connectors.
- Use the same metal for the FPC plating and the connector plating. Using more than one type of
metal may cause corrosion.
For more information, contact your OMRON sales representative.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
XF
26
Cat. No. G011-E1-06A
In the interest of product improvement, speci?cations are subject to change without notice.
相关PDF资料
PDF描述
396-030-540-202 CARD EDGE 30POS DL .125X.250 BLK
396-030-540-201 CARD EDGE 30POS DL .125X.250 BLK
396-030-526-804 CARD EDGE 30POS DL .125X.250 BLK
DS28EC20P+T IC EEPROM 20KBIT 6TSOC
FA5S040HP1R3000 CONN FFC/FPC 0.5MM 40POS R/A SMD
相关代理商/技术参数
参数描述
XF2J102412A 制造商:Omron Electronic Components LLC 功能描述:FPC CONNECTOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONN FPC 10POS 0.5MM SMT
XF2J-102412A 功能描述:CONN FPC 10POS 0.5MM SMT RoHS:是 类别:连接器,互连式 >> FFC,FPC(扁平软线)- 连接器 - 面板安装 系列:XF2J 标准包装:1 系列:BackFlip™, Easy-On™ 502250 连接器类型:顶部和底部触点 位置数:35 间距:0.012"(0.30mm) FFC,FCB 厚度:0.20mm 板上方高度:0.036"(0.90mm) 安装类型:表面贴装,直角 线缆端类型:槽口式或焊片式 端子:焊接 锁定功能:翻转锁定,背锁 特点:- 包装:剪切带 (CT) 触点表面涂层:金 触点涂层厚度:- 工作温度:-25°C ~ 85°C 额定电流:0.200A 额定电压:50V 体座材料:液晶聚合物(LCP),玻璃纤维增强型 其它名称:WM2237CT
XF2J-1024-12A 功能描述:FFC & FPC连接器 .5mm SlideLock 10Pin ZIF Adhesive Reverse RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A
XF2J122411 制造商:Omron Electronic Components LLC 功能描述:CONN FPC 12POS 0.5MM SMT
XF2J-1224-11 功能描述:FFC & FPC连接器 .5mm SlideLock 12Pin ZIF Single RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A