参数资料
型号: XF2J-1024-11A
厂商: Omron Electronics Inc-EMC Div
文件页数: 22/28页
文件大小: 0K
描述: CONN FPC 10POS 0.5MM PITCH SMD
产品培训模块: FPC Connectors
Medical Solutions
产品目录绘图: XF2J Series
特色产品: Low-Profile XF FPC Connectors
标准包装: 1
系列: XF2J
连接器类型: 垂直触点,单面
位置数: 10
间距: 0.020"(0.50mm)
FFC,FCB 厚度: 0.30mm
板上方高度: 0.163"(4.15mm)
安装类型: 表面贴装
线缆端类型: 锥形
端子: 焊接
锁定功能: 滑锁
特点: 零插入力(ZIF)
包装: 标准包装
触点表面涂层:
触点涂层厚度: 5.9µin(0.15µm)
工作温度: -30°C ~ 85°C
额定电流: 0.500A
额定电压: 50V
体座材料: 聚酰胺(PA46),尼龙 4/6
产品目录页面: 77 (CN2011-ZH PDF)
其它名称: OR735DKR
22
XF
● All Models
Operating
? Do not lock or unlock the slider with excessive force.
Doing so may result in damage to the connector or contact
failure.
? Do not use the slider again if it becomes detached.
? When inserting and removing the FPC, be sure to check
that the slider has been unlocked first.
Using the FPC in the follow ways may damage the FPC,
change the shape of the contacts, or result in contact fail-
ure.
1. Removing the FPC when the slider is still locked.
2. Removing the FPC by pulling it up and down or from left
to right or twisting it sideways.
● Backlocking Models
Operating
? Do not lock the slider without an FPC inserted.
Locking the slider without an FPC inserted will cause a
decrease in the dimensions between the contacts and con-
sequently an increase in the force required to insert an
FPC.
? When locking the slider, apply pressure with your fingertips
to both sides of the slider, then twist the slider until it
comes away from the unit.
Failing to lock the slider properly may result in contact fail-
ure.
? Do not apply force horizontally to the PCB when locking
the slider. Doing so may result in damage to the connector
or contact failure.
? When unlocking the slider, place your fingers on either side
or on the entire slider and slowly lift the slider up and away.
Do not engage the slider past its initial location during the
unlocking process. Doing so may result in damage to the
connector or contact failure.
Designing
? When designing the board, be sure to allow locking and
operating space for the slider.
Mounting
? Do not perform reflow or manual soldering with the FPC
inserted in the connector and the slider in the locked posi-
tion. Doing so may result in contact failure.
● Frontlocking Models
Operating
? When unlocking the slider, use your fingernail to rotate and
lift the slider. The slider cannot be opened to an angle of
more than 125 ° C. Do not apply force on the slider beyond
that point. Doing so may result in damage to the connector
or contact failure.
When locking the slider, apply pressure with your fingertips
to the center of the slider, then twist the slider until it comes
away from the unit. Failing to lock the slider properly may
result in contact failure.
● Slidelocking Models
Operating
? When locking the slider, apply pressure to both sides or the
entire slider, then push the slider all the way in. Not doing
so may result in contact failure.
Designing
? When designing the board, be sure to allow unlocking and
operating space for the slider.
XF
相关PDF资料
PDF描述
IDT70V06L55PF8 IC SRAM 128KBIT 55NS 64TQFP
M68LC302CAF20VCT IC MPU MULTI PROTOCOL 100-LQFP
MPC850SRCZQ50BU IC MPU PWRQUICC 50MHZ 256-PBGA
GMC30DTEF CONN EDGECARD 60POS .100 EYELET
IDT7025L55PF8 IC SRAM 128KBIT 55NS 100TQFP
相关代理商/技术参数
参数描述
XF2J102411AR100 制造商:Omron Electronic Components LLC 功能描述:CONN FPC CONN SKT 10 POS 1MM SLDR ST SMD - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONNECTOR FPC 10POS 0.5MM SMD 制造商:Omron Electronic Components LLC 功能描述:CONNECTOR FPC STANDARD 0.5M
XF2J-1024-11A-R100 功能描述:FFC & FPC连接器 .5mm SlideLock 10Pin ZIF Single Adhesive RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A
XF2J102412A 制造商:Omron Electronic Components LLC 功能描述:FPC CONNECTOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONN FPC 10POS 0.5MM SMT
XF2J-102412A 功能描述:CONN FPC 10POS 0.5MM SMT RoHS:是 类别:连接器,互连式 >> FFC,FPC(扁平软线)- 连接器 - 面板安装 系列:XF2J 标准包装:1 系列:BackFlip™, Easy-On™ 502250 连接器类型:顶部和底部触点 位置数:35 间距:0.012"(0.30mm) FFC,FCB 厚度:0.20mm 板上方高度:0.036"(0.90mm) 安装类型:表面贴装,直角 线缆端类型:槽口式或焊片式 端子:焊接 锁定功能:翻转锁定,背锁 特点:- 包装:剪切带 (CT) 触点表面涂层:金 触点涂层厚度:- 工作温度:-25°C ~ 85°C 额定电流:0.200A 额定电压:50V 体座材料:液晶聚合物(LCP),玻璃纤维增强型 其它名称:WM2237CT
XF2J-1024-12A 功能描述:FFC & FPC连接器 .5mm SlideLock 10Pin ZIF Adhesive Reverse RoHS:否 制造商:JAE Electronics 产品类型:Plugs 系列:HD 节距:0.5 mm 位置/触点数量:40 安装角: 安装风格:Cable 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:100 V per contact 电流额定值:0.24 A to 1 A