- 您现在的位置：买卖IC网 > PDF目录16654 > XFFR-30-07/97 (TE Connectivity)HEAT SHRINK TUBING PDF资料下载
参数资料
| 型号： | XFFR-30-07/97 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | HEAT SHRINK TUBING |
| 标准包装： | 100 |
| 系列： | XFFR |
| 类型： | 套管，半刚性 |
| 收缩比率： | 3 至 1 |
| 长度： | 2.50'（762.0mm） |
| 内径 - 提供： | 0.750"（19.0mm） |
| 内径 - 恢复： | 0.220"（5.6mm） |
| 已恢复的墙壁厚度： | 0.080"（2.03mm） |
| 材质： | 聚烯烃 |
| 特点： | 阻燃剂，防液体 |
| 颜色： | 黑 |
| 其它名称： | CF5863-000 |
Page 2
SPECIFICATION RW-2016 ISSUE 8
6.2
Tensile Strength and Ultimate Elongation
The test method shall be as specified in ASTM D 638.
For tubing of recovered inside diameter greater than 6.0 mm (0.236 inch), five Type IV dumbbell specimens shall be
tested. For tubing of recovered inside diameter less than or equal to 6.0 mm (0.236 inch), five tubular specimens
150 mm (6 inches) long shall be tested. Rate of jaw separation shall be 500 ± 10 mm (20 ± 0.5 inches) per minute.
The test shall be carried out at a temperature of 23 ± 2 ° C.
6.3
Halogen Content
Determine the halogen content (fluorine, chlorine and bromine) of tubing by any suitable elemental analysis technique
capable of measuring each halogen to ± 50 ppm or all three halogens together to ± 100 ppm.
7.
7.1
7.2
7.3
8.
8.1
PREPARATION FOR DELIVERY
Form
The tubing shall be supplied in cut lengths unless otherwise specified.
Packaging
Packaging shall be in accordance with good commercial practice.
Marking
Each container of tubing shall be permanently and legibly marked with the size, quantity, manufacturer's identification
and batch number .
APPLICABLE DOCUMENTS
This specification takes precedence over documents referenced herein. Unless otherwise specified, the latest issue of
referenced documents applies. The following documents form a part of this specification to the extent specified herein.
GOVERNMENT FURNISHED DOCUMENTS
Military
MIL-H-5606
MIL-DTL-83133
MIL-C-24643
NES 711
NES 713
Hydraulic Fluid, Petroleum Base, Aircraft, Missile and Ordnance
Turbine Fuel, Aviation, Grade JP-8
Cable and Cords Electrical Low Smoke for Shipboard Use, General Specification
Determination of the Smoke Index of the Products of Combustion from Small Specimens of
Material
Determination of the Toxicity Index of the Products of Combustion from Small Specimens of
Material
8.2
OTHER PUBLICATIONS
American Society for Testing and Materials (ASTM)
ASTM D 570
ASTM D 638
ASTM D 792
ASTM D 876
ASTM D 2671
Standard Test Method for Water Absorption
Standard Test Methods for Tensile Properties of Plastics
Standard Test Methods for Specific Gravity (Relative Density) and Density of Plastic
by Displacement
Standard Test Methods for Non Rigid Vinyl Chloride Polymer Tubing Used for Electrical
Insulation
Standard Methods of Testing Heat-Shrinkable Tubing for Electrical Use
If this document is printed it becomes uncontrolled. Check the latest revision.
? 2007-2008 Tyco Electronics Corporation. All rights reserved
相关PDF资料 |
PDF描述 |
|---|---|
| GBC35DCMS | CONN EDGECARD 70POS .100" WW |
| RW-175-1-0-STK | HEAT SHRINK TUBING |
| CB5350-000 | HEAT SHRINK TUBING |
| EEM44DSEN-S243 | CONN EDGECARD 88POS .156 EYELET |
| A1AXH-3436G | IDC CABLE - ASC34H/AE34G/X |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XFFR-30X25 | 制造商:TE Connectivity 功能描述:HLGN FREE TUBE 25'LNGTH X 3 D |
| XFFR-30X4 | 制造商:TE Connectivity 功能描述:CB5445-000 |
| XFFR-40X4 | 制造商:TE Connectivity 功能描述:CB5446-000 |
| XFFR4-20X25 | 制造商:TE Connectivity 功能描述:HLGN FR TUBE 25'LNGTH X 2 D |
| XFFR-48-11/97 | 制造商:TE Connectivity 功能描述:CJ0609-000 |
发布紧急采购，3分钟左右您将得到回复。