- 您现在的位置：买卖IC网 > PDF目录1657 > XN2D-1431 (Omron Electronics Inc-EMC Div)CONN SKT 4POS-1GANG E-CON 3A PDF资料下载
参数资料
| 型号： | XN2D-1431 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | CONN SKT 4POS-1GANG E-CON 3A |
| 产品培训模块： | XN2 Connector Overview Medical Solutions |
| 标准包装： | 90 |
| 系列： | XN2 |
| 连接器类型： | 插座 |
| 触点类型：： | 母形插口 |
| 位置数： | 4 |
| 加载位置的数目： | 全部 |
| 间距： | 0.079"（2.00mm） |
| 行数： | 1 |
| 安装类型： | 通孔 |
| 端子： | 压配式 |
| 特点： | 板导轨 |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 8µin（0.20µm） |
| 颜色： | 黑 |
| 包装： | 散装 |
| 产品目录页面： | 2821 (CN2011-ZH PDF) |
| 配套产品： | Z2787-ND - CONN PLUG 4POS E-CON 3A WIRE MT |
| 其它名称： | XN2D1431 Z2789 |
XN2
Safety Precautions
Precautions for Safe Use
? Do not pull on the Connectors or cables. Doing so may cause
damage to the Connectors or cause the cables to disconnect.
? Install the Connectors in a location where they will not be stepped
on, to prevent disconnection of the cables or damage to the
Connectors. If the Connectors have to be installed in such a
location, use a protective cover.
? Make sure that the Connectors are mated in the correct direction.
Mating the Connectors incorrectly will damage to the Connectors.
? Do not use the Connectors if the lock lever is bent or broken. Doing
so may cause the Connector to become loose or the device to
malfunction.
? Before mounting Connectors to a PCB, make sure that the
Connectors are positioned in the correct direction.
? Before bending a cable to connect it to a Connector, check the
bending specifications of the cable to be used.
? Do not exceed the rated current of the cable. Always check the
rated current of each cable to be used.
? Do not use pliers or other tools to remove the Connectors.
? Hold the Connectors firmly by hand when handling them. Do not
use excessive force to push the Connectors. Forcing the
Connectors may result in injury.
? These Connectors do not resist water. Do not use Connectors in
places where water or oil may be sprayed onto the Connectors.
Precautions for Correct Use
Do not use the product in atmospheres or environments that exceed
product ratings.
Wiring
? Insert one wire into each insertion hole. Inserting two or more wires
into a single hole may cause unexpected problems.
? Make sure that no power is being supplied to a Connector before
wiring, inserting, or removing the Connector. Doing so may result in
electric shock.
? Follow the wiring diagrams for the device being used when wiring
the cables.
? Strip the cables according to the instructions in the applicable
operation manual, making sure not to damage the wires.
? Do not use a screwdriver with a tip larger than the specified width
when wiring the Connectors.
? Make sure short-circuits are not created, e.g., by protruding wires.
Inserting and Removing Connectors
? When connecting or disconnecting Connectors, always hold the
case of the Connector.
? When mating Connectors, insert the Connector fully into the back
of the socket, and then make sure that the Connector will not
become loose by lightly pulling it in the opposite direction.
Recommended Screwdriver
? Use a flat-blade screwdriver with a tip of 2 mm max. Do not use
screwdrivers that gradually widen towards the base of the
screwdriver.
? Using other screwdrivers may cause damage to the adjacent poles.
? Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
? Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb
Cat. No. G044-E1-01
0412(0412)(O)
5
相关PDF资料 |
PDF描述 |
|---|---|
| XN2D-1871 | CONNECTOR SKT 8POS ECON PCB |
| YLP-06V | CONN PLUG HOUSING 6 POSITION |
| ZER-15V-S | CONN RECEPT HOUSING 15POS ZE |
| ZLP-02V | CONN HOUSING PL 2 POS 5MM |
| ZPDR-28V-S | CONN RECEPT HOUSING 28POS ZPD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XN2D1471 | 制造商:Omron Electronic Components LLC 功能描述:E-CON CONNECTOR - Bulk |
| XN2D-1471 | 功能描述:I/O 连接器 4P SNGL SKT PCB CONN 28-20 AWG EASY WIRE RoHS:否 制造商:Hirose Connector 产品:Plugs 系列:DH 端口数量: 位置/触点数量:51 节距:1 mm 触点电镀: 触点材料: 型式:Male 电流额定值:0.5 A 安装风格:Cable 端接类型:IDC 颜色: 安装角: |
| XN2D1571 | 制造商:Omron Electronic Components LLC 功能描述:E-CON CONNECTOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONNECTOR SKT 5POS ECON PCB |
| XN2D-1571 | 功能描述:I/O 连接器 5P SNGL SKT PCB CONN 28-20 AWG EASY WIRE RoHS:否 制造商:Hirose Connector 产品:Plugs 系列:DH 端口数量: 位置/触点数量:51 节距:1 mm 触点电镀: 触点材料: 型式:Male 电流额定值:0.5 A 安装风格:Cable 端接类型:IDC 颜色: 安装角: |
| XN2D1671 | 制造商:Omron Electronic Components LLC 功能描述:E-CON CONNECTOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONNECTOR SKT 6POS ECON PCB |
发布紧急采购，3分钟左右您将得到回复。