- 您现在的位置：买卖IC网 > PDF目录5255 > XN2D-1671 (Omron Electronics Inc-EMC Div)CONNECTOR SKT 6POS ECON PCB PDF资料下载
参数资料
| 型号： | XN2D-1671 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | CONNECTOR SKT 6POS ECON PCB |
| 产品培训模块： | Medical Solutions |
| 标准包装： | 108 |
| 系列： | XN2 |
| 连接器类型： | 插座 |
| 触点类型：： | 母形插口 |
| 位置数： | 6 |
| 加载位置的数目： | 全部 |
| 间距： | 0.079"（2.00mm） |
| 行数： | 1 |
| 安装类型： | 通孔 |
| 端子： | 压配式 |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 8µin（0.20µm） |
| 颜色： | 黑 |
| 包装： | 散装 |
| 产品目录页面： | 2821 (CN2011-ZH PDF) |
| 配套产品： | OR1023-ND - CONNECTOR PLUG 6POS ECON |
| 其它名称： | OR1029 XN2D1671 |
Assembly Instructions
Preparing the Cable
Align the cable with the guide marked STRIP GAUGE on the side of
the Connector, strip 7 to 8 mm of the cable sheath, and then twist the
wires several times.
4. Make sure that the following operations have been performed.
? Check that the operating lever is reset.
? Check that the procedure in step 2 has been followed. (Pull
gently on the cable to make sure that there is resistance, indicat-
ing that the Connectors are wired correctly.)
7 to 8 mm
Connecting the Cable to the Connector
1. Use a flat-blade screwdriver to push down the operating lever
inside the operation slot until it locks.
Flat-blade
screwdriver
Operation slot
2. Insert the wire fully to the back of the wire insertion hole. Make
sure that the cable sheath is inserted into the hole, and that the
end of the wire has passed through the contact section.
Removing Cables from the Connector
1. Press down on the operating lever to lock the lever before remov-
ing the cable.
Contact
section
Cable sheath
Wire insertion
hole
2. After removing the cable from the Connector, always reset the
operating lever, except when rewiring the Connector. The Con-
nector can be rewired without resetting the operating lever.
Operatin g lever
(white)
3. Insert the screwdriver into the release slot, and gently pull back
the lever until a click is heard by resetting the lever.
Operatin g lever
(white)
Release slot
184
Easy-wire connectors for Industrial Components
XN2
相关PDF资料 |
PDF描述 |
|---|---|
| EL8178BIWZ-T7A | IC OPAMP SGL R-R I/O SOT23-6 |
| 0034.1001 | FUSE 1.6A 250VAC 6X32 FAST |
| EL8100IS-T13 | IC AMP SGL R-R 200MHZ 8-SOIC |
| 606289-1 | CONN RING TUBE 4 AWG #1/4 |
| PPPC392LJBN-RC | CONN FMALE 78POS DL .1" R/A GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XN2D1871 | 制造商:Omron Electronic Components LLC 功能描述:E-CON CONNECTOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONNECTOR SKT 8POS ECON PCB |
| XN2D-1871 | 功能描述:I/O 连接器 8P SNGL SKT PCB CONN 28-20 AWG EASY WIRE RoHS:否 制造商:Hirose Connector 产品:Plugs 系列:DH 端口数量: 位置/触点数量:51 节距:1 mm 触点电镀: 触点材料: 型式:Male 电流额定值:0.5 A 安装风格:Cable 端接类型:IDC 颜色: 安装角: |
| XN2D4431 | 制造商:Omron Electronic Components LLC 功能描述:CONN WIRE TO BD SKT 4 POS 2MM SLDR ST TH - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONN SKT 4POS-4GANG E-CON 3A |
| XN2D-4431 | 功能描述:I/O 连接器 Four-socket Connector RoHS:否 制造商:Hirose Connector 产品:Plugs 系列:DH 端口数量: 位置/触点数量:51 节距:1 mm 触点电镀: 触点材料: 型式:Male 电流额定值:0.5 A 安装风格:Cable 端接类型:IDC 颜色: 安装角: |
| XN2D4471 | 制造商:Omron Electronic Components LLC 功能描述:E-CON CONNECTOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONNECTOR SKT QUAD 4POS ECON PCB |
发布紧急采购，3分钟左右您将得到回复。