- 您现在的位置：买卖IC网 > PDF目录6086 > XN2D-4431 (Omron Electronics Inc-EMC Div)CONN SKT 4POS-4GANG E-CON 3A PDF资料下载
参数资料
| 型号： | XN2D-4431 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 4/5页 |
| 文件大小： | 0K |
| 描述： | CONN SKT 4POS-4GANG E-CON 3A |
| 产品培训模块： | XN2 Connector Overview Medical Solutions |
| 标准包装： | 54 |
| 系列： | XN2 |
| 连接器类型： | 插座 |
| 触点类型：： | 母形插口 |
| 位置数： | 16 |
| 加载位置的数目： | 全部 |
| 间距： | 0.079"（2.00mm） |
| 行数： | 4 |
| 行间距： | 0.256"（6.50mm） |
| 安装类型： | 通孔 |
| 端子： | 压配式 |
| 触点表面涂层： | 金 |
| 触点涂层厚度： | 8µin（0.20µm） |
| 颜色： | 黑 |
| 包装： | 散装 |
| 产品目录页面： | 2821 (CN2011-ZH PDF) |
| 配套产品： | Z2787-ND - CONN PLUG 4POS E-CON 3A WIRE MT |
| 其它名称： | XN2D4431 Z2790 |
XN2
Four-socket PCB Socket Connector
XN2D-4471
25.9
19.5
6.5 (pitch)
Applicable PCB Dimensions (Top View)
t=1.6 ± 0.2
1 ? 0.10 dia.
3.1
8.9
6.5 ± 0.05 (pitch)
2 ± 0.05 (pitch)
6 ± 0.1
19.5 ± 0.1
+0.05
6.75
9.05
1 ± 0.05
13
Assembly Instructions
0.2
2 (pitch)
15.8
6
6.75
1
3.3
3.2
3.2
Exterior of Four-socket
PCB Connector
Preparing the Cable
Align the cable with the guide
marked STRIP GAUGE on the side
of the Connector, strip 7 to 8 mm of
(3) Insert the screwdriver into the
release slot, and gently pull
back the lever until a click is
heard by resetting the lever.
Operating lever
(white)
Release slot
the cable sheath, and then twist the
wires several times.
Connecting the Cable to the Connector
(1) Use a flat-blade
7 to 8 mm
screw-driver to push
down the operating
lever inside the
operation slot until it
locks.
(2) Insert the wire fully to
the back of the wire
Flat-blade screwdriver
Operation slot
(4) Make sure that the following operations
have been performed.
? Check that the operating lever is reset.
? Check that the procedure in step 2 has been
followed. (Pull gently on the cable to make
sure that there is resistance, indicating that
insertion hole. Make sure that the cable sheath is inserted into the
the Connectors are wired correctly.)
hole, and that the end of the wire has passed through the contact
section.
Removing Cables from the
Operating lever
Contact section
Cable sheath
Wire
insertion hole
Connector
(1) Press down on the operating lever to
(white)
lock the lever before removing the
cable.
(2) After removing the cable from the
Connector, always reset the operating
lever, except when rewiring the
Connector. The Connector can be
rewired without resetting the operating
lever.
4
相关PDF资料 |
PDF描述 |
|---|---|
| TSW-114-17-T-S | CONN HEADER 14POS .100" SNGL TIN |
| TSW-103-14-T-D | CONN HEADER 6POS .100" DUAL TIN |
| TSW-101-14-G-D | CONN HEADER 2POS .100" DUAL GOLD |
| TSW-117-08-T-S | CONN HEADER 17POS .100" SNGL TIN |
| TSW-103-08-T-D-RA | CONN HEADER 6POS .100 DL R/A TIN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XN2D4471 | 制造商:Omron Electronic Components LLC 功能描述:E-CON CONNECTOR - Bulk 制造商:Omron Electronic Components LLC 功能描述:CONNECTOR SKT QUAD 4POS ECON PCB |
| XN2D-4471 | 功能描述:I/O 连接器 4P FOUR SKT PCB CONN 28-20 AWG EASY WIRE RoHS:否 制造商:Hirose Connector 产品:Plugs 系列:DH 端口数量: 位置/触点数量:51 节距:1 mm 触点电镀: 触点材料: 型式:Male 电流额定值:0.5 A 安装风格:Cable 端接类型:IDC 颜色: 安装角: |
| XN300 | 制造商:Apex Tool Group 功能描述:5 5/8 IN. PRECISION CARVING KNIFE |
| XN30E610003 | 制造商:SPC Multicomp 功能描述:BACKSHELL, D-SUB, DA, ZINC; Series:-; D Sub Shell Size:DA; Connector Body Material:Zinc; Cable Exit Angle:90 |
| XN3321 | 制造商:OHIO BUCKEYE 功能描述: |
发布紧急采购，3分钟左右您将得到回复。