参数资料
| 型号： | XRP7665IDBTR-F |
| 厂商： | Exar Corporation |
| 文件页数： | 8/12页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 3A 8-SOIC |
| 标准包装： | 100 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.925 V ~ 16 V |
| 输入电压： | 4.75 V ~ 18 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 340kHz |
| 电流 - 输出： | 3A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm Width）裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 8-SOIC-EP |
| 其它名称： | 1016-1753 |
X R P 7 6 6 5
3 A 1 8 V S y n c h r o n o u s S t e p - D o w n C o n v e r t e r
OUTPUT INDUCTOR
Select the output inductor for inductance L, DC
current rating I DC and saturation current rating
I SAT . I DC should be larger than regulator output
current. I SAT , as a rule of thumb, should be
50% higher than the regulator output current.
Since the regulator is rated at 3A then I DC ≥ 3A
and I SAT ≥ 4.5A. Calculate the inductance from:
of thumb, should be at least twice the output
voltage. When calculating the required
capacitance, usually the overriding
requirement is current load-step transient. If
the unloading transient (i.e., when load
transitions from a high to a low current) is
met, then usually the loading transient (when
load transitions from a low to a high current)
is met as well. Therefore calculate the C OUT
based on the unloading transient requirement
from:
Where:
VOUT(V) ΔI L(p-p) (A)
L(μH)
ΔI L is peak-to-peak inductor current ripple
nominally set to 30%-40% of I OUT
f S is nominal switching frequency (340kHz)
As an example, inductor values for several
common output voltages are shown in tables 1
and 2. Note that example inductors shown in
tables 1 and 2 are Wurth shielded inductors. If
the target application is not sensitive to EMI
then unshielded inductors may be used.
Inductor
Example
5.0 0.9 10 744314101
3.3 0.7 10 744314101
2.5 0.6 10 744314101
1.8 0.6 7.6 744314760
1.5 0.5 7.6 744314760
1.2 0.6 4.9 744314490
Table 1: Suggested inductor values for V IN =12V and
I OUT =3A
Where:
L is the inductance calculated in the preceding
step
I High is the value of load-step prior to
unloading. This is nominally set equal to
regulator current rating (3A).
I Low is the value of load-step after unloading.
This is nominally set equal to 50% of regulator
current rating (1.5A).
V transient is the maximum permissible voltage
transient corresponding to the load step
mentioned above. V transient is typically specified
from 3% to 5% of V OUT .
ESR of the capacitor has to be selected such
that the output voltage ripple requirement
ΔV OUT , nominally 1% of V OUT , is met. Voltage
ripple ΔV OUT is mainly composed of two
components: the resistive ripple due to ESR
and capacitive ripple due to C OUT charge
transfer. For applications requiring low voltage
VOUT(V) ΔI L(p-p) (A)
L(μH)
Inductor
Example
ripple, ceramic capacitors are recommended
because of their low ESR which is typically in
3.3
2.5
1.8
1.5
1.2
0.7
0.8
0.7
0.6
0.5
4.9
4.9
4.9
4.9
4.9
744314490
744314490
744314490
744314490
744314490
the range of 5m? . Therefore ΔV OUT is mainly
capacitive. For ceramic capacitors calculate
the ΔV OUT from:
Table 2: Suggested inductor values for V IN =5V and
I OUT =3A
OUTPUT CAPACITOR C OUT
Select the output capacitor for voltage rating,
capacitance C OUT and Equivalent Series
Resistance ESR. The voltage rating, as a rule
Where:
ΔI L is from table 1 or 2
C OUT is the value calculated above
f s is nominal switching frequency (340kHz)
? 2013 Exar Corporation
8/12
Rev. 2.0.1
相关PDF资料 |
PDF描述 |
|---|---|
| XRP7713ILB-F | IC REG CTRLR BUCK PWM 32-TQFN |
| ZHT431F02TC | IC VREF SHUNT PREC ADJ SOT-23 |
| ZL2004ALNN-01 | IC REG CTRLR BUCK SYNC ADJ 32QFN |
| ZL2004ALNN | IC REG CTRLR BUCK SYNC ADJ 32QFN |
| ZL2008ALAFT1 | IC REG CTRLR BUCK PWM VM 36-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XRP7674 | 制造商:EXAR 制造商全称:EXAR 功能描述:2A 18V Synchronous PFM/PWM Step-Down Regulator |
| XRP7674EVB | 功能描述:电源管理IC开发工具 2A 18V PFM/PWM EVAL Board RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| XRP7674IDTR-F | 功能描述:直流/直流开关调节器 2A 18V PFM/PWM Step-Down Regulator RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| XRP7675 | 制造商:EXAR 制造商全称:EXAR 功能描述:3A 18V Synchronous PFM/PWM Step-Down Regulator |
| XRP7675EVB | 功能描述:电源管理IC开发工具 3A 18V PFM/PWM EVAL Board RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
发布紧急采购，3分钟左右您将得到回复。