- 您现在的位置：买卖IC网 > PDF目录17559 > XVA-01 (Excelsys Technologies Ltd)POWER CHASSIS MED 400W 6 SLOT PDF资料下载
参数资料
| 型号： | XVA-01 |
| 厂商： | Excelsys Technologies Ltd |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | POWER CHASSIS MED 400W 6 SLOT |
| 产品培训模块： | Xgen Configurable Power Supplies |
| 标准包装： | 5 |
| 系列： | powerPacs |
| 用户配置： | Configurator |
| 功率（瓦特）： | 400W |
| 位置数： | 6 |
| 尺寸/尺寸： | 10.62" L x 5.00" W（269.75mm x 89mm） |
| 高度： | 1.59"（40.40mm） |
| 相关产品： | 633-1020-ND - MODULE POWER DUAL 5VDC-28VDC 3A 633-1019-ND - MODULE POWER 5VDC-28VDC 5A 633-1018-ND - MODULE POWER 28VDC-58VDC 6A 633-1017-ND - MODULE POWER 12VDC-30VDC 10A 633-1016-ND - MODULE POWER 6VDC-15VDC 20A 633-1015-ND - MODULE POWER 3.2VDC-6VDC 40A 633-1014-ND - MODULE POWER 1.5VDC-3.6VDC 50A |
| 其它名称： | 633-1010 |
Xgen FLEXIBILITY and SIGNALS
Voltage Adjustment - Local
The multi-turn potentiometer that adjusts each output within the speci-
fied range may be accessed via the output panel of the power supply.
Clockwise rotation increases output voltage. Resolution is approximate-
Temperature Alarm (Option 01)
Open collector signal indicating excessive powerPac temperatures due
to fan failure or operation beyond ratings. This signal is activated at
least 10ms prior to system shutdown.
ly 5% of nominal voltage (Vnom) per turn.
Fan Fail (Option 01)
Voltage Adjustment - Remote (resistive / electronic)
The output voltage may be adjusted or trimmed by means of an exter-
nal resistor or potentiometer network connected to the Vtrim pin. Linear
Electronic programming is also possible and may be implemented
according to the formula Vout = K Vcontrol. See Xgen series
Designers’ Manual for full details.
Paralleling
To achieve increased current capacity, simply parallel outputs using the
standard parallel links. Excelsys ‘wireless’ sharing ensures that current
hogging is not possible. To parallel connect outputs:
1. Switch on IShare switch to ON on powerMods.
2. Connect Negative parallel link.
3. Adjust output voltages of powerMods to within 5mV of eachother.
4. Connect Positive Parallel Link.
Parallel Links available to
order. Part Number XP1
Seriesing
To achieve increased output voltages, simply series outputs using stan-
dard series links, paying attention to the requirements to maintain
SELV levels if required in your system.
Series Links available. Part
Open collector signal indicating that at least one of the system fans
have failed. This does not cause system shutdown.
Power Good
Opto-isolated output signal indicates that the powerMod is operating
correctly and output voltage is within normal band.
Opto transistor ON = Good.
Indication LEDs
Each powerMod has a visual indicator to identify that it is operating
within normal ratings. Very useful for system diagnosis.
Number XS1
Signal Connector Pinout
Pin
J2
( powerPac )
J3
( powerMod)
J3
( powerMod)
Type A
Type B)
Remote Sensing
When the load is remote from the power supply, the remote sense
pins may be used to compensate for drops in the power leads.
Where the power cabling contributes significant dynamic impedance,
see Xgen series Designers’ Manual.
Bias Voltage
1
2
3
4
5
6
7
common
+5V bias
ac fail
fan fail*
global enable
temp alarm*
+sense
-sense
V trim
I trim
+inhibit/enable
-inhibit/enable
+power good
+pg (V2)
-pg (V2)
inhibit (V2)
common (V2)
+pg (V1)
-pg (V1)
inhibit (V1)
A SELV isolated 5V (always on) bias voltage rated at 250mA is pro-
vided on J2 to facilitate miscellaneous control functions.
Current Limit Adjustment
8 global inhibit
*Option 01 only
Signal Connector Pinout
-power good
common (V1)
The output current limit setting may be adjusted (downwards only)
by means of an external resistor connection to the I trim pin.
Inhibit/Enable
TYPE A Xg1-Xg7
J3
TYPE B : Xg8
J3
3
Inhibiting may be implemented either globally or on a per module
basis ( powerPac or powerMod inhibiting). Reverse logic (Enabling)
Voltage
Adjust
V1 Adjust
may also be implemented, see Xgen series Designers’ Manual.
AC Fail
2 1
J4
2 1
4
J4
V2 Adjust
Open collector signal indicating that the input voltage has failed or is
less than 80Vac. This signal changes state giving 5mS of warning
before loss of output regulation. See Xgen series Designers’ Manual
2
3
for full specifications.
1
2
1
M4 Screws
J4 Connector : M4 Screw
J3 Connector Mating Connector
Housing: Locking Molex 51110-0860
Non Locking Molex 51110-0850
Crimp Termnal: Molex p/n 50394
J4Connector : Camden 9200/4A
J3 Connector Mating Connector
Housing: Locking Molex 51110-0860
Non Locking Molex 51110-0850
Crimp Termnal: Molex p/n 50394
See Xgen series Designers’ Manual for full signal connector details.
相关PDF资料 |
PDF描述 |
|---|---|
| T95Y476K004CSSL | CAP TANT 47UF 4V 10% 2910 |
| ABMM2-32.000MHZ-E2F-T | CRYSTAL 32.000 MHZ 18PF SMD |
| AML21BBA2BA | SWITCH PUSHBUTTON SPDT 0.1A 125V |
| LB16WKW01-12-BJ | SWITCH PUSHBUTTON SPDT 3A 125V |
| 3292X-1-253LF | TRIMMER 25K OHM 0.5W TH |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XVAC11 | 制造商:TELEMECANIQUE 功能描述: |
| XVA-C21 | 制造商:Schneider Electric 功能描述:BASE UNIT + COVER |
| XVB | 制造商:Excelsys Technologies 功能描述: |
| XVB-00 | 制造商:Excelsys Technologies 功能描述:Card Cage, Power Supply, 6 Position, 700 W, Medical, 1U, 10.55x5x1.59 In, Xvite Series |
| XVB-01 | 功能描述:POWER CHASSIS 700W 6 SLOT RoHS:是 类别:电源 - 外部/内部（非板载） >> AC/DC 模块可配置开关电源 系列:powerPacs 标准包装:1 系列:powerPacs 用户配置:Configurator 功率（瓦特）:800W 位置数:6 尺寸/尺寸:6.46” L x 5.00” W x 1.59” H (164.0mm x 127.0mm x 40.4mm) 高度:1.59"（40.40mm） 其它名称:633-1260 |
发布紧急采购，3分钟左右您将得到回复。