- 您现在的位置：买卖IC网 > Datasheet目录891 > XWC-01 (Excelsys Technologies Ltd)POWER CHASSIS 800W 6 SLOT Datasheet资料下载
参数资料
| 型号： | XWC-01 |
| 厂商： | Excelsys Technologies Ltd |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | POWER CHASSIS 800W 6 SLOT |
| 标准包装： | 1 |
| 系列： | powerPacs |
| 用户配置： | Configurator |
| 功率（瓦特）： | 800W |
| 位置数： | 6 |
| 尺寸/尺寸： | 6.46” L x 5.00” W x 1.59” H (164.0mm x 127.0mm x 40.4mm) |
| 高度： | 1.59"（40.40mm） |
| 其它名称： | 633-1260 |
Xgen Flexibility and Signals
For detailed information please refer to the Xgen Designers’
Manual which is available on-line or contact Excelsys.
Voltage Adjustment
Output voltage can be adjusted in a number of ways:
powerPac Options
temperature Alarm (Option 01)
Open collector signal indicating that excessive temperature has
been reached due to fan failure or operation beyond ratings. This
1.
2.
On board multi turn potentiometer
Remote resistive programming (via Vtrim pin)
signal is activated at least 10ms prior to system shutdown.
Fan Fail (Option 01 )
3. Remote voltage programming (via Vtrim pin)
Current Limit Adjustment
Output current limit can be Straight line or Foldback and can be
adjusted via Itrim pin.
Parallel Connection
To achieve increased current
capacity, simply parallel outputs
using the standard parallel links.
Open collector signal indicating that at least one of the
powerPac fans has failed. This does not cause power supply
shutdown. The power supply will continue to operate until 10ms
after the temperature alarm signal is generated.
series Connection
To achieve increased output
voltages, simply series outputs
using standard series links,
paying attention to the
requirements to maintain SELV
levels if required in your system.
Remote sensing
Parallel Links available to order.
Part Number XP1
Series Links available. Part
Number XS1
Reverse Fan (Option 02)
The Xgen series is available with reverse air flow direction.
Contact Excelsys for derating details.
Ultra Low Leakage current (Option 04)
The Xgen is available with the option of Ultra Low Earth Leakage
Current of <150μA and is approved to EN60601-1 and
UL60601-1 2nd and 3rd Editions.
Conformal Coating (Option C)
Xgen is available with conformal coating for harsh environments
When the load is remote from the power supply, the remote
sense pins may be used to compensate for drops in the power
leads. Where the power cabling contributes significant dynamic
impedance, see Xgen series Designers’ Manual.
Bias Voltage
A SELV isolated bias (always on) voltage of 5V @ 250mA
(30mA on XCE and XVE models) is provided on J2 pin 2 relative
to J2 pin 1 (common) and may be used for miscellaneous
control functions. 5V @ 500mA available on request.
and MIL-COTs applications.
Ruggedised Option (Option R)
Xgen is available with extra ruggedisation for applications that
are subject to extremes in shock and vibration.
Input cable Option (Option D)
3 Wire input mains cable. Input cables are 300mm in length and
come supplied with fast on connectors.
signal Connector Pinout
Inhibit/Enable
Inhibiting may be implemented either globally or on a per
module basis (powerPac or powerMod inhibiting). Reverse logic
(enabling) may also be implemented.
AC Fail
Open collector signal indicating that the input voltage has failed
or is less thant 80Vac. This signal changes state giving 5ms of
warning beore loss of output regulation.
Pin
1
2
3
4
5
6
7
8
J2 ( powerPac )
common
+5V bias
ac fail
fan fail*
global enable
temp alarm*
global inhibit
J3 ( powerMod)
Type A
+sense
-sense
V trim
I trim
+inhibit/enable
-inhibit/enable
+power good
-power good
J3 ( powerMod)
Type B
+pg (V2)
-pg (V2)
inhibit (V2)
common (V2)
+pg (V1)
-pg (V1)
inhibit (V1)
common (V1)
*Option 01 only
tYPE A Xg1-Xg7
tYPE B : Xg8
J3
Voltage
J3
V1 Adjust
Power Good
Opto-isolated output signal indicates that the powerMod is
2 1
Adjust
J4
2
2
1
4
3
V2 Adjust
J4
operating correctly and output voltage is within normal band.
2
1
1
M4 Screws
J4 Connector : M4 screw
J3 Connector Mating Connector
J4Connector : Camden 9200/4A
J3 Connector Mating Connector
Housing:
Locking Molex 51110-0860
Housing:
Locking Molex 51110-0860
www.excelsys.com
non Locking Molex 51110-0850
Crimp termnal: Molex p/n 50394
non Locking Molex 51110-0850
Crimp termnal: Molex p/n 50394
相关PDF资料 |
PDF描述 |
|---|---|
| XZC-00 | POWER CHASSIS 1200W 6 SLOT |
| Y0056100R000K0L | TRIMMER 100 OHM 0.75W TH |
| Y00692K00000J0L | TRIMMER 2K OHM 0.25W TH |
| Y4053200R000J0L | TRIMMER 200 OHM 0.25W TH |
| YEV09T03-0G | CONVERTER DC-DC 9V 3A VERT T/H |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XWC390GNP | 制造商:Texas Instruments 功能描述: |
| XWC555500P00A | 制造商:Excelsys Technologies 功能描述: |
| XWC5CFX | 制造商:Panasonic Industrial Company 功能描述:WASHER |
| XWD1205 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:DUAL OUTPUT, 180 WATT |
| XWD1212 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:DUAL OUTPUT, 180 WATT |
发布紧急采购，3分钟左右您将得到回复。