参数资料
型号: YMF754-V
元件分类: 微控制器/微处理器
英文描述: SPECIALTY MICROPROCESSOR CIRCUIT, PQFP128
封装: 0.50 MM PITCH, LQFP-128
文件页数: 42/60页
文件大小: 309K
代理商: YMF754-V
YMF754
December 25, 1999
-47-
5. Hardware Volume Control
The hardware volume control determines the AC’97 master volume without using any software control using
the external circuit listed below.
Two pins, VOLUP# for increasing the volume and VOLDW# for decreasing the volume, are used.
1k
VOLDW#
VOLUP#
1k
1000p
Push SW
DS-1E provides a shadow register for the AC’97 master volume.
When the software accesses the AC’97
master volume, it is always reflected in the shadow register.
Bringing the VOLUP# pin LOW level increments the left and right-channel shadow register by +1.5dB
respectively.
If either one of channel shadow registers have been already set to maximum value (00000b),
the corresponding channel shadow register remains in the same value, and the other channel shadow register
will only be incremented.
If both of channel shadow registers have been already set to maximum values,
they remain in the same values.
Bringing the VOLDW# pin LOW level decrements the left and right-channel shadow register by -1.5dB
respectively.
If either one of channel shadow registers have been already set to minimum value (11111b),
the corresponding channel shadow register remains in the same value, and the other channel shadow register
will only be decremented.
If both of channel shadow registers have been already set to minimum values,
they remain in the same values.
The master volume for the AC’97 is updated automatically via the AC-Link by setting corresponding values
to the shadow registers.
When both of the VOLUP# and VOLDW# pins are at LOW level at the same time, the MUTE bit of the
shadow register is enabled to automatically set the MUTE bit of the AC’97 master volume via the AC-Link.
When either one of the VOLUP# or VOLDW# pins is at LOW level, mute condition of the AC’97 is
deactivated via the AC-Link.
At this point of time, the master volume is set to the value before the mute.
When the AC-Link is busy (in case the register is controlled by the AC’97 Control Register), shadow register
values will be set to the AC’97 on the next frame.
At this time, BUSY is set at the AC’97 control register.
When the master volume is changed or muted depending on the logic level transition status of the VOLUP#
and VOLDW# pins, an interrupt is generated at the host.
The interrupt is used to notify the driver that the
master volume has been changed.
When the AC’97 is not connected or it is placed in power down mode, the shadow register values will remain
in the same even if the VOLDW# and VOLUP# pins are at LOW level.
相关PDF资料
PDF描述
YMF754 DS-1E
YMF754-R DS-1E
YMF754-V DS-1E
YMF781-SZ SPECIALTY CONSUMER CIRCUIT, PQFP100
YMF807 SPECIALTY CONSUMER CIRCUIT, PQFP48
相关代理商/技术参数
参数描述
YMF781 制造商:YAMAHA 制造商全称:YAMAHA CORPORATION 功能描述:APL-1 Automobile sound PLayer-1
YMF795 制造商:YAMAHA 制造商全称:YAMAHA CORPORATION 功能描述:APL-2 Automobile sound Player-2
YMH025-02R 制造商:YEONHO 制造商全称:YEONHO ELECTRONICS 功能描述:2.50mm PITCH CONNECTOR
YMH025-03R 制造商:YEONHO 制造商全称:YEONHO ELECTRONICS 功能描述:2.50mm PITCH CONNECTOR
YMH025-04R 制造商:YEONHO 制造商全称:YEONHO ELECTRONICS 功能描述:2.50mm PITCH CONNECTOR