
All specifications are subject to change without notice.
YNWMAX153 Rev 05
03/04/11
SaRonix-eCera is a Pericom Semiconductor company US: +1-408-435-0800 TW: +886-3-4518888
www.pericom.com
3.3V CMOS 153.6 MHz WiMAX VCXO
Application Specific Voltage Controlled
Crystal Oscillator 7.0 x 5.0mm
YNWMAX153
ASSP VCXO
Electrical Performance
Parameter
Min.
Typ.
Max.
Units
Notes
Output Frequency
153.6
MHz
Supply Voltage VDD
3.135
3.3
3.465
V
Supply Current, Output Enabled
30
mA
Frequency Stability
±35
ppm
See Note 1 below
Operating Temperature Range
-40
+85
°C
Output Logic 0, VOL
10% VDD
V
Output Logic 1, VOH
90% VDD
V
Output Load
15
pF
Duty Cycle
45
55
%
Measured 50% VDD
Rise and Fall Time
5
ns
Measured 20/80% of waveform
Jitter, Phase
1
ps, RMS(1-s)
12kHz~20 MHz Frequency Band
Jitter, Peak to Peak
40
ps, Pk-Pk
100.000 Random Periods
Phase Noise
-65
-50
dBc/Hz
At 10Hz offset
Phase Noise
-90
-85
dBc/Hz
At 100Hz offset
Phase Noise
-120
-115
dBc/Hz
At 1kHz offset
Phase Noise
-135
-130
dBc/Hz
At 10kHz offset
2
Notes:
1.
Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (10 years at +40°C average effective ambient temperature), shock and vibration.
2.
Forspecificationsotherthanthoselisted,pleasecontactsales.
Absolute Maximum Ratings
Parameter
Min.
Typ.
Max.
Units
Notes
Storage Temperature
-55
+125
°C
For the latest product information visit:
http://www.pericom.com/products/timing/oscillators/YNWMAX153/
For test circuit go to:
http://www.pericom.com/pdf/sre/tc_vc6cmos.pdf
For soldering reflow profile and reliability test ratings go to:
http://www.pericom.com/pdf/sre/reflow.pdf
For tape and reel information go to:
http://www.pericom.com/pdf/sre/tr_7050_xo.pdf
Voltage Control Function
Parameter
Min.
Typ.
Max.
Units
Notes
Pullability
±75
±110
ppm
Control Voltage Range
0.3
3.0
V
As rated
Center Control Voltage
1.65
V
For RMT Nominal Frequency
Monotonic Linearity
10
%
Positive Transfer Slope
Input Impedance
130
kΩ
Control Voltage Pin
Output Enable / Disable Function
Parameter
Min.
Typ.
Max.
Units
Notes
Input Voltage (pin 2), Output Enable
3.0
V
or open
Input Voltage (pin 2), Output Disable (low power standby)
0.3
V
Output is Hi-Z
11-0008