- 您现在的位置：买卖IC网 > PDF目录17783 > Z49-C6 8M (Omron Electronics Inc-IA Div)EXTENSION CABLE 8M PDF资料下载
参数资料
| 型号： | Z49-C6 8M |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 10/11页 |
| 文件大小： | 0K |
| 描述： | EXTENSION CABLE 8M |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | Z49-C68M Z49C68M |
Z4LC
Precautions
The Z4LC Parallel Beam Line Sensor, is a Class 1 Laser Product
according to EN60825 (IEC825) and JIS C6802 and a Class II
Laser Product according to FDA (21 CFR1040.10) (see note).
The Z4LC is meant to be built into final system equipment. Pay
special attention to the following precautions for the safe
use of the product:
Note: Europe: Class 1 of EN60825: 1991 = IEC825: 1984 &
IEC825-A1: 1990
Japan: Class 1 of JIS C6802: 1991
U.S.A.: Class II of FDA (21 CFR1040.10)
Z4LC
J MEASUREMENT ACCURACY
To improve the measurement accuracy, place the sensing object
as close as possible to the receiver.
J COMPATIBILITY
The Sensor or Controller can be used with another controller or
sensor. However, the emitter and receiver are adjusted as a set.
When setting up the Sensor, be sure to set the binary level
before operation.
J MAINTENANCE
?
?
?
?
?
Use this product as specified in this datasheet, or you may
be exposed to hazardous laser radiation.
Be careful not to expose your eyes directly to the laser radi-
ation or indirectly to laser radiation reflected from mirror or
shiny surfaces.
To avoid exposure to hazardous laser radiation, do not dis-
place nor remove the protective housing during operation,
maintenance, and any other servicing.
The user should return the product to OMRON for all repair
and servicing.
When used in other countries, observe the regulations and
standards specified by each country.
Install the Sensor in clean environment and keep the filter on the
front panel of the Sensor free from oil and dust. If affected by oil
or dust, clean the filter as follows.
Use a blower brush (used to clean camera lenses) to blow large
dust particles from the surface. Do not blow the dust away with
your mouth.
Use a soft cloth (for lenses) with a little alcohol to remove the
remaining dust. Do not use a scrubbing action when cleaning as
scratches on the filter could result in a Sensor malfunction.
J ENVIRONMENT
J LABEL INDICATIONS
EN
JIS
Do not use in strong electromagnetic fields or in an environment
where the operation of the Sensor is subject to the reflection of
intensive light (such as other laser beams or electric arc welding
machine).
The Sensor may not detect the object or the resolution may be
insufficient depending on the material or shape of objects. (i.e.
transparent objects, etc.)
J MUTUAL INTERFERENCE
Sensors can be closely mounted. Do not, however, make each
laser beam closer, or the Sensors may malfunction.
FDA
Certification and Identification Label
Aperture Label
J APPROPRIATE USE
The user must operate the product according to the performance
specifications described in the instruction manual.
Before using the product under conditions which are not
described in the manual or applying the product to nuclear
control systems, railroad systems, aviation systems vehicles,
combustion systems, medical equipment, amusement machines,
safety environment, and other systems, machines, and
equipment that may have a serious influence on lives and
property if used improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the
product are sufficient to the systems, machines, and equipment,
and be sure to provide the systems, machines, and equipment
with double safety mechanisms.
Class II Caution
Label Logo Type
Note: Use of controls, adjustments, or procedures other than
those specified herein may result in hazardous radiation
exposure.
10
相关PDF资料 |
PDF描述 |
|---|---|
| BLM18EG331TN1D | FERRITE CHIP 330 OHM 500MA 0603 |
| CPPLC7-HZ0PT | OSC 5.0V PROG CMOS TRI ST 50PPM |
| BLM18EG221TN1D | FERRITE CHIP 220 OHM 1A 0603 |
| TZB4R200BA10R00 | CAP TRIMMER 4.5-20PF 100V SMD |
| CPPLC7-HZ0PP | OSC 5.0V PROG CMOS PWRDN 50PPM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| Z49F2D | 制造商:OMRON Industrial Automation 功能描述:VERT BEAM ATTACH 10MM RECEIVER 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:VERT BEAM ATTACH 10mm RECEIVER |
| Z49-F2D | 功能描述:VERT BEAM ATTACH 10MM RECEIVER RoHS:是 类别:未定义的类别 >> 其它 系列:* 标准包装:1 系列:* 其它名称:MS305720A |
| Z49F2L | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:VERT BEAM ATTACH 10MM EMITTER 制造商:OMRON Industrial Automation 功能描述:VERT BEAM ATTACH 10MM EMITTER 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:VERT BEAM ATTACH 10mm EMITTER |
| Z49-F2L | 功能描述:VERT BEAM ATTACH 10MM EMITTER RoHS:是 类别:未定义的类别 >> 其它 系列:* 标准包装:1 系列:* 其它名称:MS305720A |
| Z49F3D | 制造商:OMRON Industrial Automation 功能描述: 制造商:Omron Corporation 功能描述: 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:HORIZ BEAM ATTACH 10mm RECEIVR |
发布紧急采购，3分钟左右您将得到回复。