- 您现在的位置：买卖IC网 > PDF目录16734 > ZM7308G-65502-T2 (Power-One)IC DIGITAL PWR CONTROLLER 64QFN PDF资料下载
参数资料
| 型号： | ZM7308G-65502-T2 |
| 厂商： | Power-One |
| 文件页数： | 19/33页 |
| 文件大小： | 0K |
| 描述： | IC DIGITAL PWR CONTROLLER 64QFN |
| 标准包装： | 100 |
| 应用： | 数字电源控制器 |
| 电源电压： | 3 V ~ 3.6 V |
| 电流 - 电源： | 12mA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-QFN |
| 供应商设备封装： | 64-QFN 裸露焊盘（9x9） |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页当前第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
ZM7300G Series Digital Power Manager
Data Sheet
converters and then turn them on, if the Auto Turn-On is enabled in the POL Group configuration
window shown in Figure 10. Otherwise, the user will need to send the turn-on command via the I 2 C
bus.
When the IBV exceeds the IBH threshold plus the hysteresis, the DPM will pull OK lines low turning off
all POL converters. The POL converters will execute regular turn-off ramping their output voltages
down according to the turn-off delay and falling slew rate settings. In addition, the DPM will save the
contents of the Run Time Counter into the non-volatile memory. If the IBV does not decrease below the
IBH threshold minus the hysteresis within the next 50ms, the DPM will pull low the FE_EN output and
clear all bits in the POL Programming Status registers. The IBV High bit in the IBS Monitoring Window
will change to red. If the IBV still does not change, in 50ms the DPM will pull the CB pin high for 1ms to
trigger an optional crowbar protection.
One second after the IBV decreases below the IBH threshold minus the hysteresis, the DPM will pull the
FE_EN high and program all POL converters. Upon completion of the programming process, the DPM
will turn on the POL converters, if the Auto Turn-On is enabled in the POL Group configuration window
shown in Figure 10.
The propagation delay between the IBV increasing/decreasing above/below corresponding thresholds
and the DPM pulling down OK lines and triggering the turn-off process is approximately 1ms.
10.4.4.1
Voltage Reference
For the purposes of IBV monitoring the user can select either the DPM’s internal voltage reference or an
external 2.5V voltage reference. The selection is made by clicking an appropriate radio button in the
DPM Type Selection window shown in Figure 14.
Figure 14. DPM Type Selection Window
The DPM’s internal 2.56V voltage reference guarantees 10% overall accuracy of the IBV protection
thresholds. If the accuracy is sufficient, the user does not need to make any changes to the schematic
shown in Figure 3. If higher accuracy of the IBV monitoring is desired, then a 2.5V external reference
ZD-00896 Rev. 5.1, 13-Jul-10
www.power-one.com
Page 19 of 33
相关PDF资料 |
PDF描述 |
|---|---|
| GSM11DREN | CONN EDGECARD 22POS .156 EYELET |
| ZM7308G-65502-T1 | IC DIGITAL PWR CONTROLLER 64QFN |
| 808975-000 | BOOT MOLDED STR SIZE 96 W/LIP |
| RNF-100-1-RD-FSP | HEAT SHRINK TUBING |
| H3BWH-1006G | IDC CABLE - HSR10H/AE10G/HPL10H |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ZM7308G-65502Y-B1 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:Digital Power Manager |
| ZM7308G-65502Y-B2 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:Digital Power Manager |
| ZM7308G-65502Y-Q1 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:Digital Power Manager |
| ZM7308G-65502Y-T1 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:Digital Power Manager |
| ZM7308G-65502Y-T2 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:Digital Power Manager |
发布紧急采购，3分钟左右您将得到回复。