- 您现在的位置：买卖IC网 > Datasheet目录370 > ZXLD1322DCCTC (Diodes Inc)IC LED DRIVR WHITE BCKLGT 14-DFN Datasheet资料下载
参数资料
| 型号： | ZXLD1322DCCTC |
| 厂商： | Diodes Inc |
| 文件页数： | 9/17页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVR WHITE BCKLGT 14-DFN |
| 特色产品： | LED Driver Solutions |
| 标准包装： | 1 |
| 拓扑： | PWM，降压（降压），升压（升压） |
| 输出数： | 1 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 闪灯/白光，通用 |
| 类型 - 次要： | 高亮度 LED（HBLED），白色 LED |
| 频率： | 600kHz |
| 电源电压： | 2.5 V ~ 15 V |
| 输出电压： | 18V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-VFDFN 裸露焊盘 |
| 供应商设备封装： | 14-DFN-EP（4x3） |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 125°C |
| 产品目录页面： | 1478 (CN2011-ZH PDF) |
| 其它名称： | ZXLD1322DCCDKR |
A Product Line of
Diodes Incorporated
ZXLD1322
ADJ pin
The ADJ pin is connected to the internal 500mV reference (V REF ) via a 100k resistor. This biases the ADJ pin to the
reference voltage and defines nominal 100% LED current.
The ADJ pin can be overdriven with an external dc voltage between 50mV and 500mV to reduce the LED current
proportionally between 10% and 100% of the nominal value.
LED current can also be adjusted by applying a low frequency PWM signal to the ADJ pin to turn the device On and Off.
This will produce an average output current proportional to the duty cycle of the control signal.
The device can be shut down by shorting the ADJ pin to ground, or pulling it to a voltage below 28mV with a suitable open
collector NPN or open drain NMOS transistor. In the shutdown state, most of the circuitry inside the device is switched off
and residual quiescent current will be typically 12 μ A.
Thermal control of LED current
The 'Thermal compensation current' circuit produces a sourcing current (Itc) which is zero for voltages above 75mV on T ADJ
and increases to 100 μ A when T ADJ falls to 50mV. This current is summed into the control node and subtracted from the
demand current, causing LED current to reduce from 100% down to zero over this input range. The potential divider,
consisting of a fixed resistor Rt and an NTC Thermistor Rth between V REF and ground, defines the voltage on T ADJ and sets
the threshold temperature. Further details are given in the application notes.
The Thermal Control feature can be disabled by leaving the T ADJ pin floating, or by connecting it to VREF.
Over-temperature shutdown
The ZXLD1322 incorporates an over-temperature shutdown circuit to protect the device against damage caused by excess
die temperature, resulting from excessive power dissipation in the switch. The output of the 'Over-temp Shutdown' circuit will
go high when the die temperature exceeds 150°C (nominal). This will turn off the drive to the switch during normal operation.
Operation will resume when the device has cooled to a safe level.
ZXLD1322
Document number: DS32166 Rev. 3 - 2
9 of 17
www.diodes.com
April 2010
? Diodes Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| ZXLD1350ET5TA | IC LED DRIVR WHITE BCKLGT TSOT-5 |
| ZXLD1352ET5TA | IC LED DRIVER HIGH BRIGHT TSOT-5 |
| ZXLD1356DACTC | IC LED DRIVER WHITE BCKLGT 6-DFN |
| ZXLD1360ET5TA | IC LED DRIVR WHITE BCKLGT TSOT-5 |
| ZXLD1362ET5TA | IC LED DRIVR WHITE BCKLGT TSOT-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ZXLD1322DCCTC-CUT TAPE | 制造商:DIODES 功能描述:ZXLD1322 Series 15 V 600 kHz 700 mA Buck/Boost Mode DC-DC Converter - DFN-14 |
| ZXLD1322DCTC | 制造商:ZETEX 制造商全称:ZETEX 功能描述:Buck/boost mode DC-DC converter for LED driving with 700mA output and current control |
| ZXLD1350 | 制造商:ZETEX 制造商全称:ZETEX 功能描述:350mA LED driver with internal switch |
| ZXLD1350_07 | 制造商:ZETEX 制造商全称:ZETEX 功能描述:350mA LED driver with internal switch |
| ZXLD1350ET5 | 制造商:Diodes Incorporated 功能描述:LED DRIVER INTERNAL SWITCH SMD 制造商:Diodes Incorporated 功能描述:LED DRIVER, INTERNAL SWITCH, SMD 制造商:Diodes Incorporated 功能描述:IC, LED DRIVER, BUCK, TSOT-23-5; Topology:Buck (Step Down); No. of Outputs:1; Output Current:350mA; Output Voltage:30V; Driver Case Style:TSOT-23; Input Voltage Min:7V; Input Voltage Max:30V; Dimming Control Type:PWM / DC ;RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。