- 您现在的位置：买卖IC网 > Datasheet目录560 > 0622016250 (Molex Inc)TOOL PRESS BLOCK REMOVAL Datasheet资料下载
参数资料
| 型号： | 0622016250 |
| 厂商： | Molex Inc |
| 文件页数： | 9/23页 |
| 文件大小： | 0K |
| 描述： | TOOL PRESS BLOCK REMOVAL |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | 062201-6250 62201-6250 622016250 |
VHDM ? and VHDM-HSD ? *
*VHDM and VHDM HSD are Trademark of Teradyne, Inc
HOLDER
LOCATING
PIN
PC BOARD
LOCATING PIN
TYPICAL
INSERTION MODULES
Figure 2-3
MOUNTING INSERT MODULE
CONNECTOR
IN A MOUNTING BLOCK
ASSEMBLY
SUPPORT PALLET
3. Now tighten the M3 set screws against the modules
with one (1) screw against each power module
inserter and each alignment block; and two (2)
screws evenly spaced on a 6 by 10 header insertion
module; and at least three (3) screws evenly spaced
on a 6 by 25 header insertion module. Figure 2-4
shows a typical completed assembly.
Figure 2-4
TYPICAL INSERTION TOOL ASSEMBLY
2.4 Operation
Header insertion Tooling
Figure 2-5
ALIGNING TERMINAL
Figure 2-6
CONNECTOR ASSEMBLY
ON PC BOARD SUPPORT PALLET
2. Locate the pre-loaded board into the support pallet.
See Figure 2-6.
3. Locate the tooling assembly in the connector
assembly, carefully checking alignment. See
Figure 2-7.
4. Position the pre loaded support pallet under the
press platen.
CAUTION: Do not over tighten the setscrews as
you could damage the insertion tool.
NOTE: See Section 4 for details on selecting
modules and mounting blocks.
PRES-IN TOOLING
PC BOARD
SUPPORT
PALLET
Figure 2-7
TYPICAL HEADER ASSEMBLY
ON THE PC BOARD
PINS TO HOLES
5. Cycle the press. See Section 2.1 for press stroke
1. Carefully locate the connector(s) on the printed
circuit board and start in by hand. Make sure pin 1
is in the correct position on all connectors. See
Figure 2-5.
adjustment.
6. Remove the loaded support pallet.
7. Carefully remove the insertion tool assembly.
8. Remove the printed circuit board.
Doc. No: TM-622010999
Revision: H
Release Date: 08-10-99
Revision Date: 03-15-10
UNCONTROLLED COPY
Page 9 of 23
相关PDF资料 |
PDF描述 |
|---|---|
| 0622017400 | ARBOR PRESS - APPLI-MATE/RAST |
| 0622018000 | DIE FIXTURE AND DIE SET |
| 0622018626 | INSERTION TOOL MICRO TCA 170 |
| 0622018634 | 11 ROW VERT PWR MOD SUPPORT TOOL |
| 0622018635 | 15 ROW VERT PWR MOD SUPPORT TOOL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 0622016400 | 制造商:Molex 功能描述:OMNI GRID POWER MODULE PRESS IN TOOL 制造商:Molex 功能描述:OMNI GRID POWER MODULE PRESS IN TOOL - Bulk 制造商:Molex 功能描述:OMNI GRID PWR MOD PRESS IN TOOL |
| 0622016600 | 制造商:Molex 功能描述:Ribbon Cable Tool Kit, Press Not Included 制造商:Molex 功能描述:CONN ACC PRESS TOOL - Bulk 制造商:Molex 功能描述:S/L RIBBON CBL ARBOR PRESS TOOL |
| 0622016601 | 功能描述:ANVIL RoHS:否 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
| 0622016603 | 制造商:Molex 功能描述:TERM LOCATOR PINS 制造商:Molex 功能描述:TERM LOCATOR PINS - Bulk |
| 0622016615 | 功能描述:CRIMP PUNCH RoHS:否 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
发布紧急采购，3分钟左右您将得到回复。