收藏本站
参数资料
型号： 0638017600
厂商： Molex Inc
文件页数： 9/36页
文件大小： 0K
描述： PRESS TM4000 UP TO 4AWG 240AC
其它有关文件： Overlap Style Insulation Crimps
标准包装： 1
系列： TM-4000
工具类型： 台式压机，气动 - 无喷枪
适用于相关产品： FineAdjust? 和 Mini-Mac? 施用器
配用： 638027600-ND - MINI MAC APPLICATOR 14-16 AWG
638027500-ND - MINI MAC APPLICATOR 18-22 AWG
638027200-ND - MINI MAC APPLICATOR 14-18 AWG
638027100-ND - MINI MAC APPLICATOR 14-18 AWG
638027000-ND - MINI MAC APPLICATOR 14-18 AWG
638026900-ND - MINI MAC APPLICATOR 14-18 AWG
0639024800-ND - FINE ADJUST APPLICATOR
0639024700-ND - FINE ADJUST APPLICATOR
0639024600-ND - FINE ADJUST APPLICATOR
0639023900-ND - FINE ADJUST APPLICATOR
更多...
相关产品： WM5083-ND - GUARD TM-3000&4000 UNIV PRESS
WM6296-ND - TOOL PRESS SHUT HEIGHT GAUGE
其它名称： 063801-7600
063801-7600-E
0638017600-E
63801-7600
63801-7600-E
63801-7600-ND
638017600
638017600-E
WM6378
TM-3000 and TM4000 Universal Press
REEL SUPPORT
MOTOR
LIFT HOOK
ASSEMBLY
WORK LIGHT
TERMINAL GUIDE
POWER CORD
PRESS CONTROL
ASSEMBLY
WORK
BENCH
OILER
ASSEMBLY
2.1
Lifting/Mounting
FOOT PEDAL
ASSEMBLY
Figure 2-1
WARNING : This Press weighs over 100 kg (220 lb); it should not be lifted by one individual. Mechanical lifting
devices should be used. A person lifting the press can sustain severe back or other injuries.
A lifting hook is provided on top of the press. A heavy-duty chain, rope, cable, or belt can be used with loops, links, or rings
on each end that can securely attach to the lifting hooks. An electric, hydraulic, or mechanical crane should be used to lift
the press. Lift the press up approximately 12mm (.50”) and verify that the press is well balanced. Upon verification, the
press can be lifted onto a sturdy workbench. Access to the back of the machine is required for manual hand cycling. A
wooden bench that is a minimum of 25mm (1.00”) thick will offer quiet vibration-free operation. For thinner or sheet metal
tops, the TM-3000 can be attached to the table with two 12mm bolts. Bolts are not supplied by Molex, however bolting
presses to the work bench is recommended for all bench placements.
FOOT
2.2
Foot Pedal and Power Connection
Connect the 3-pin plug for the foot pedal in the rear of the press control
assembly. Turn the locking ring clockwise until tight. Connect the power
cord plug to the socket in the back of the control assembly. Use a grounded
power source. See Figure 2-2.
PETAL CORD
2.3
Reel Support
Figure 2-2
POWER
CORD PLUG
Install the reel support in the hole located on the top of machine frame. For rear feed, rotate the reel support as required.
See Figure 2-4. Loosen the M10 set screw that holds the reel support. Pull up from the hole and rotate for the proper
feeding orientation. Then slide down back into the hole and tighten the M10 set screw.
To setup the reel support assembly:
1
2
3
4
5
Place one reel boss (order number 63801-7261) onto the reel support (order number 638017260).
Align the back of the reel support over the rear location of where the applicator is installed in the press.
Securely tighten the wing screw on the reel boss.
Next place reel spring (order number 638017263) onto the reel support.
Slide one reel discs (order number 638017262) onto the reel support.
Doc. No: TM-638017299
Revision: E
Release Date: 06-06-05
Revision Date: 09-05-13
UNCONTROLLED COPY
Page 9 of 36
相关PDF资料
PDF描述
0638018000 MINI MAC APPLICATOR - REAR FEED
0638019000 MINI MAC APPLICATOR - REAR FEED
0638019250 WIRE STRIPPER METRIC 0.3-6MM2AWG
0638019700 HAND HELD SEMI AUTO CRIMP PULLER
0638021000 MINI MAC APPLICATOR - REAR FEED
相关代理商/技术参数
参数描述
0638017631 功能描述:CONTROL PANEL 制造商:molex, llc 系列:* 零件状态:在售 标准包装:1
0638017701 制造商:Molex 功能描述:CUTTER STRIKER 制造商:Molex 功能描述:CUTTER STRIKER - Bulk
0638017720 制造商:Molex 功能描述:TOP CUTTER 制造商:Molex 功能描述:TOP CUTTER - Bulk
0638017721 制造商:Molex 功能描述:TOP CUTTER 制造商:Molex 功能描述:TOP CUTTER - Bulk
0638017722 制造商:Molex 功能描述:TOP CUTTER 制造商:Molex 功能描述:TOP CUTTER - Bulk
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*