- 您现在的位置：买卖IC网 > Datasheet目录578 > 0638837060 (Molex Inc)WIRE GUIDE FUNNEL Datasheet资料下载
参数资料
| 型号： | 0638837060 |
| 厂商： | Molex Inc |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | WIRE GUIDE FUNNEL |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | 063883-7060 63883-7060 638837060 |
Wire Guide Funnel - Continuous Molded Strip
PILOT HOLE
FLATS FACING
THE OUTSIDE
FUNNELS
ASSEMBLED
FUNNELS SHOWN
CLOSED
SETSCREW
FUNNEL SLIDE
PIVOT PINS
FIGURE 2
INSTALLATION ON APPLICATOR (See Figure 3)
1. To install the wire guide funnel, make sure the power is disconnected from the press.
2. The press ram should be fully up.
3. Replace the M8 button head cap screw that holds the punches in the ram with the M8 by 30mm long socket head cap screw
furnished with the wire guide funnel. The head of the cap screw will be used to drive the wire guide funnel slide. Check revision
marking on the front of the cut-off punch. It MUST BE marked revision B for the wire guide funnel assembly to work properly.
4. The wire guide funnel is mounted to the two M4-threaded holes on the lower face of the applicator frame. The roll pins at the top
of the funnel slide block are intended to rest on the top of the applicator frame, providing additional stability for the slide.
5. Put (two) M4 by 35mm long socket head cap screws through the lower holes in the slide block, then place the guide spacer block
over each screw.
Note: A thin film of grease applied to the guide spacer block will keep it from falling off the screw as the wire guide funnel is
mounted to the applicator.
6. Align the counterbored hole in the slide with the head of the M8 cap screw and place the wire guide funnel against the applicator
frame.
M8 CAP SCREW
GUIDE SPACER
BLOCKS
M4 CAP SCREW
M4 THREADED HOLES
Figure 3
Doc No. 63883-7060
Revision: B
Release Date: 10-04-05
Revision Date: 11-23-05
UNCONTROLLED COPY
Page 2 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 0638837070 | TOOL KIT |
| 0638837270 | TOOL KIT |
| 0638850170 | TOOL KIT |
| 0638850270 | TOOL KIT |
| 0638850370 | TOOL KIT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 0638837070 | 功能描述:TOOL KIT RoHS:是 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
| 0638837080 | 功能描述:FUNNEL TOOLING 制造商:molex, llc 系列:* 零件状态:在售 标准包装:1 |
| 0638837200 | 功能描述:MINI MAC APPLICATOR CONTINUOUS M RoHS:是 类别:工具 >> 压接器，施用器，压力机 系列:Mini-Mac™, Insulkrimp® 产品培训模块:Board-to-Wire Connectors 标准包装:1 系列:DF11 工具类型:台式压机，施用器 适用于相关产品:矩形触点，24-28 AWG 特点:- 配用:H1505TR-ND - CONN SOCKET 24-28AWG CRIMP GOLDH1504TR-ND - CONN SOCKET 24-28AWG CRIMP TIN 相关产品:AP105-DF11-2428S(64)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(63)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(62)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(61)-ND - TOOL APPLICATOR DF11 ACCESSORIESCM-105 WITH TRANSFORMER-ND - TOOL AUTO CRIMPING MACHINE 其它名称:*AP105-DF11-2428SQ1139807AQ949366 |
| 0638837270 | 功能描述:TOOL KIT RoHS:是 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
| 0638850100 | 制造商:Molex 功能描述:CONN ACC MINI MAC APPLICATOR TOOL - Bulk |
发布紧急采购，3分钟左右您将得到回复。