- 您现在的位置：买卖IC网 > Datasheet目录578 > 0638837060 (Molex Inc)WIRE GUIDE FUNNEL Datasheet资料下载
参数资料
| 型号： | 0638837060 |
| 厂商： | Molex Inc |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | WIRE GUIDE FUNNEL |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | 063883-7060 63883-7060 638837060 |
Wire Guide Funnel - Continuous Molded Strip
7. Using a 3mm hex wrench, tighten the two M4 screws to secure the wire guide funnel to the applicator. (Note: a small gap will exist
between the funnel guide and the applicator frame)
8. With power disconnected, hand cycle the press to verify that the applicator ram and funnel plate slide move freely without binding.
9. Restore power to the press.
WIRE GUIDE FUNNEL ADJUSTMENTS
The wire guide funnel can be adjusted left-to-right and up or down for
alignment with the terminal.
Since the wire guide funnel slide is centrally mounted to the applicator
ram, left-to-right adjustment should not be necessary. If it is required,
some movement is available by loosening the two M4 socket head cap
screws (holding the funnel slide to the applicator frame) and moving the
slide left or right.
Left-to-right positioning can also be accomplished by adjusting the
applicator’s terminal feed to relocate the terminal. On continuous-
molded strip applicators, however, excessive feed position adjustment
will affect terminal cutoff quality.
Up or down adjustment:
ACCESS HOLE TO
HEIGHT ADJ SETSCREW
(USE A 1.5mm
HEX WRENCH)
HEIGHT ADJUSTMENT
SETSCREW
1. With a terminal in position over the crimp anvils, cycle the press to
Figure 4
LOCK SETSCREW
its split-point.
Note: If the press has an adjustable split-point, adjust it as low as possible (without starting to crimp the terminal). This will hold
the terminal more securely against the anvils.
2. Using a 2.0mm hex wrench, loosen the adjustment lock screw on the front of the funnel slide.
3. The height adjustment screw is accessed through the hole on the top of the funnel slide. Using a 2.0mm hex wrench, turn the
adjustment screw clockwise to raise the funnel or counterclockwise to lower the funnel. Proper adjustment should result in the
insulation guide hole being concentric with the terminal barrel. See Figure 4.
4. Tighten the adjustment lock screw. Over-tightening the lock screw will damage the threads of the height adjustment screw.
Doc No. 63883-7060
Revision: B
Release Date: 10-04-05
Revision Date: 11-23-05
UNCONTROLLED COPY
Page 3 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 0638837070 | TOOL KIT |
| 0638837270 | TOOL KIT |
| 0638850170 | TOOL KIT |
| 0638850270 | TOOL KIT |
| 0638850370 | TOOL KIT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 0638837070 | 功能描述:TOOL KIT RoHS:是 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
| 0638837080 | 功能描述:FUNNEL TOOLING 制造商:molex, llc 系列:* 零件状态:在售 标准包装:1 |
| 0638837200 | 功能描述:MINI MAC APPLICATOR CONTINUOUS M RoHS:是 类别:工具 >> 压接器，施用器，压力机 系列:Mini-Mac™, Insulkrimp® 产品培训模块:Board-to-Wire Connectors 标准包装:1 系列:DF11 工具类型:台式压机，施用器 适用于相关产品:矩形触点，24-28 AWG 特点:- 配用:H1505TR-ND - CONN SOCKET 24-28AWG CRIMP GOLDH1504TR-ND - CONN SOCKET 24-28AWG CRIMP TIN 相关产品:AP105-DF11-2428S(64)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(63)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(62)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(61)-ND - TOOL APPLICATOR DF11 ACCESSORIESCM-105 WITH TRANSFORMER-ND - TOOL AUTO CRIMPING MACHINE 其它名称:*AP105-DF11-2428SQ1139807AQ949366 |
| 0638837270 | 功能描述:TOOL KIT RoHS:是 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
| 0638850100 | 制造商:Molex 功能描述:CONN ACC MINI MAC APPLICATOR TOOL - Bulk |
发布紧急采购，3分钟左右您将得到回复。