- 您现在的位置：买卖IC网 > Datasheet目录578 > 0638851061 (Molex Inc)WIRE GUIDE FUNNEL Datasheet资料下载
参数资料
| 型号： | 0638851061 |
| 厂商： | Molex Inc |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | WIRE GUIDE FUNNEL |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | 063885-1061 63885-1061 638851061 |
Wire Guide Funnel – Mylar Tape Carrier
WIRE GUIDE FUNNEL ADJUSTMENTS
The wire guide funnel can be adjusted left-
to-right and up or down for alignment with
the terminal.
Since the wire guide funnel is centrally
mounted to the applicator ram, left-to-
right adjustment should not be necessary.
If it is required, some movement is
available by loosening the two M4 socket
head cap screws (holding the funnel slide
to the applicator frame) and moving the
slide left or right.
Left-to-right positioning can also be
accomplished by adjusting the applicator ’ s
terminal feed to relocate the terminal
itself.
M8 CAP
SCREW
M4 THREADED
HOLES
GUIDE
SPACER
BLOCKS
Figure 4
M4 CAP SCREW
Up or down funnel adjustment:
1. With a terminal in position over the crimp anvils, cycle
the press to its split-point.
Note: If the press has an adjustable split-point, adjust it
as low as possible (without starting to crimp the
terminal). This will hold the terminal more securely
against the anvils.
2. Using a 2mm hex wrench, loosen the adjustment lock
screw on the front of the funnel slide.
3. The height adjustment screw is accessed through the hole
on the top of the slide. Using a 2mm hex wrench, turn
the adjustment screw clockwise to raise the funnel or
counter-clockwise to lower the funnel. Proper
adjustment should result in the insulation guide hole
being concentric with the terminal barrel. See Figure 5
4. Tighten the adjustment lock screw. Over-tightening the
ACCESS HOLE TO
HEIGHT ADJ SETSCREW
(USE A 1.5mm
HEX WRENCH)
HEIGHT ADJUSTMENT
SETSCREW
lock screw will damage the threads of the height
adjustment screw.
Figure 5
LOCK SETSCREW
Doc No. 63885-1061
Revision: A
Release Date: 03-02-06
Revision Date: 03-02-06
UNCONTROLLED COPY
Page 3 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 0638851070 | TOOL KIT |
| 0638851370 | TOOL KIT |
| 0638851470 | TOOL KIT |
| 0638851570 | TOOL KIT |
| 0638851700 | MINI MAC APPLICATOR MYLAR TAPE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 0638851070 | 功能描述:TOOL KIT RoHS:是 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
| 0638851080 | 功能描述:FUNNEL TOOLING RoHS:是 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
| 0638851081 | 功能描述:FUNNEL TOOLING 制造商:molex, llc 系列:* 零件状态:在售 标准包装:1 |
| 0638851300 | 功能描述:MINI MAC APPLICATOR MYLAR TAPE RoHS:是 类别:工具 >> 压接器，施用器，压力机 系列:Mini-Mac™, Avikrimp®, Insulkrimp®, Krimptite™ 产品培训模块:Board-to-Wire Connectors 标准包装:1 系列:DF11 工具类型:台式压机，施用器 适用于相关产品:矩形触点，24-28 AWG 特点:- 配用:H1505TR-ND - CONN SOCKET 24-28AWG CRIMP GOLDH1504TR-ND - CONN SOCKET 24-28AWG CRIMP TIN 相关产品:AP105-DF11-2428S(64)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(63)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(62)-ND - TOOL APPLICATOR DF11 ACCESSORIESAP105-DF11-2428S(61)-ND - TOOL APPLICATOR DF11 ACCESSORIESCM-105 WITH TRANSFORMER-ND - TOOL AUTO CRIMPING MACHINE 其它名称:*AP105-DF11-2428SQ1139807AQ949366 |
| 0638851370 | 功能描述:TOOL KIT RoHS:是 类别:工具 >> 压接器，施用器，压力机 - 配件 系列:* 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B |
发布紧急采购，3分钟左右您将得到回复。