参数资料
型号: 101-1293
厂商: Rabbit Semiconductor
文件页数: 112/118页
文件大小: 0K
描述: RCM4510W DEV KIT
标准包装: 1
类型: 收发器,微处理器
频率: 2.4GHz
适用于相关产品: RCM4510W
已供物品: 板,模块,天线,线缆,CD,文档,电源
其它名称: 316-1189
D.2.1 Additional Reference Information
Check Digi’s Web site for the latest information and documentation on the XBee RF
module, the X-CTU utility, and the Digi ? XBee USB. Note that the XBee ? and the XBee
PRO ? RF modules are presently not compatible with the XBeeRF module used with the
RCM4510W, but the general documentation about ZigBee and the use of AT commands
for the XBee ? and the XBee PRO ? RF modules is relevant.
D.2.2 Update Digi ? XBee USB Firmware
The firmware version used by the Digi ? XBee USB must correspond to the firmware version
installed on the RCM4510W. If you have updated the RCM4510W firmware (or you have
a need to re-install the firmware on the Digi ? XBee USB), the corresponding firmware for
the Digi ? XBee USB is in the Dynamic C Utilities\X-CTU\MODEMFW folder.
? Remember to record the extended PAN ID, NI, and other parameters you are using.
? Firmware of the type XB24-ZB_21….zip is used for the Digi ? XBee USB coordinator.
CAUTION: Different firmware versions are likely to interact with the Dynamic C libraries
in different ways. Rabbit has tested the firmware associated with a particular version of
Dynamic C for correct operation, and only this version is included on the Dynamic C
CD-ROM — do not use any other firmware versions with that version of Dynamic C.
1. Start X-CTU from the desktop icon and set the “PC Settings” tab to 9600 baud, HARD-
WARE flow control, 8 data bits, parity NONE , 1 stop bit.
2. On the “PC Settings” tab, check the “Enable API” box under “Host Setup.”
3. On the “PC Settings” tab, select the “USB Serial Port” and click “Test/Query.” You
should see a response showing the Modem Type (XB 24 B) and the firmware version.
Click OK .
Note that several USB serial ports could be listed. If you select a serial port without the
Digi ? XBee USB connected, the X-CTU response to “Test/Query.” will be “communi-
cation with modem … OK,” but the modem type will be unknown, and the firmware
version will be blank.
If you a get a message that X-CTU is unable to open the COM port, verify that you
selected the COM port with the “USB Serial Port,” then try unplugging the Digi ? XBee
USB from the USB slot and plugging it back in. Now click “Test/Query” again.
4. Under the “Modem Configuration” tab click the “Read” button. X-CTU will now dis-
play the networking and I/O parameters for the Digi ? XBee USB.
Modem: XBEE XB24-ZB
Function Set: ZIGBEE COORDINATOR API (do not select other settings)
Version: the version of the firmware included with the version of Dynamic C you are using
5. Click the “Read” button, select XB24-B as the Modem type; select ZIGBEE COORDI-
NATOR API as the Function Set, and 21… as the Version, then click “Write.”
6. When the process is complete set the PANID, NI, and other parameters to the values
you were using before the firmware was upgraded.
106
RabbitCore RCM4500W
相关PDF资料
PDF描述
101-8430-09-203 LED BASE SUBMINI PANEL INDICATOR
103-0537-403 CAP PMI OILTIGHT 1" CLEAR
103-1234-403 CAP LG PANEL IND BLUE OIL TIGHT
103-1336-403 CAP PMI TORPEDO 1" LIGHT YELLOW
103-3101-05-103 LED BASE T-3 1/4 PANEL OIL TIGHT
相关代理商/技术参数
参数描述
101-1294 功能描述:处理器配件 12VDC POWER SUPPLY REPLACES 101-0686 RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于:
101-1295 功能描述:处理器配件 RCM5600W Antenna Kit RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于:
10-112989-1 制造商: 功能描述: 制造商:undefined 功能描述:
10112A WAF 制造商:Intersil Corporation 功能描述:
10112-A-0440-2 制造商:Amatom Electronic Hardware 功能描述: