参数资料
| 型号： | 10409 |
| 厂商： | Desco |
| 文件页数： | 1/7页 |
| 文件大小： | 0K |
| 描述： | PAINT COND LATEX GREY 5GAL |
| 标准包装： | 1 |
| 系列： | Statguard® |
| 处理剂/清洁剂类型： | 涂料，导电 |
| 使用： | 地板 |
| 技术规格： | 灰 |
| 数量： | 5 加仑 |
| 包装： | 桶 |
| 其它名称： | 82002 |
TB-7001 June 2011 Page 1 of 7
DESCO INDUSTRIES INC. Technical Bulletin TB-7001
Statguard Conductive Acrylic Paint
Application Instructions
Figure 1. Statguard Conductive Acrylic paint.
Description
Statguard Conductive Acrylic Paint is a one part floor coating
formulated to produce controlled dissipation of static electrical
charges. Statguard Conductive Acrylic Paint is very effective as a
static control floor coating for electronics manufacturing, assembly,
and storage. It is available in grey (similar to PMS 432) in 1 gallon
(3.8 litres) containers and in 5 gallon (19 litres) containers; and in
light grey (similar to PMS 429) in 5 gallon (19 litres) containers.
The color may vary between production lots.
NOTE: Statguard Conductive Acrylic Paint has a one year shelf
life from the date of invoice. The product should not be allowed to
freeze. Store at temperatures above 45 degrees as stated in the
Material Safety Data Sheet. We recommend that these products
be stored in their original containers and be sealed when not in
use. We cannot guarantee performance if not properly mixed or is
used after one year from date of sale.
General Guidelines
GROUNDING:
Conventional grounding practices like connecting painted surfaces
to ground or internal building grounds are only required for
applications of Statguard Conductive Acrylic Paint that are not in
excess of 20 square feet (1.8 square metres). For applications that
are greater than 20 square feet (1.8 square metres), grounding
should not be required. The electrical properties of conductive
paint enable the surface to dissipate 5000 volts to zero in less than
0.01 seconds per FTMS 101C, Method 4046 without conventional
grounds. The conductive paint becomes a capacitive reservoir that
effectively drains static charges.
Foot grounders should be used in conjunction with flooring painted
with Statguard Conductive Acrylic Paint to properly ground
personnel. For more information, please contact any of the Desco
Industries companies.
Surface Preparation
The two most important characteristics for successful application
of Statguard Conductive Acrylic Paint applications are:
1. The surface must be clean, dry, dull, and smooth. Heavy dirt or
grease build-up should be removed with a stripper or degreaser.
Cleaning methods range from: sweeping, vacuuming, wire brush,
air-blasting, water jet, steam cleaning, or stripping.
2. If the surface is concrete, it must be in good condition.
CONCRETE:
New concrete should cure for a minimum of 28 days before
coating with Statguard Conductive Acrylic Paint. Not all concrete
is created equal -- concrete surfaces vary widely in physical and
chemical qualities due to the way the concrete was formulated,
poured, or finished.
There are several methods to prepare problem concrete. Each
method depends on the condition of the concrete. Adhesion
properties can be increased by profiling or roughing the surface
through acid etching, rotary drum sanding, scarifying, or
mechanically scratching the surface.
You must test for moisture in the concrete. If moisture is present,
the floor should not be coated until the source of the moisture is
determined and eliminated.
PRIMING:
Statguard Conductive Acrylic Paint bonds well to clean, dry
concrete. However, a standard industrial primer can be used on
certain difficult to bond substrates and enhance the adhesion of
Statguard Conductive Acrylic Paint.
PREVIOUSLY PAINTED SURFACES:
The surface should be clean and free of dust, grease, wax, and
soap residue. Wash with ordinary detergent and water. Rinse
thoroughly with clean water and let dry. Glossy surfaces can be
dulled by lightly sanding and then vacuuming and cleaning. Cracks
and holes should be repaired before applying the Statguard
Conductive Acrylic Paint. Adhesion can be improved by using a
standard industrial type primer.
UNPAINTED SURFACES:
Adhesion can be improved by using a standard industrial type
primer. Metal should be primed with red oxide primer. Concrete,
wood, plastics, and most other surfaces should be properly
cleaned. Let dry and then apply Statguard Conductive Acrylic
Paint.
COVERAGE:
Statguard Conductive Acrylic Paint will cover 300 to 400 square
feet (27.87 to 37.16 square metres) at a 1 to 1.5 mil (0.0254 to
0.0381 mm) thick dry film per gallon (3.87 litres) on a smooth
surface. Coverage is less on coarse or textured surfaces. Two
coats are recommended to achieve maximum performance from
the paint.
Made in America
2011 DESCO INDUSTRIES INC.
Employee Owned
DESCO INDUSTRIES INC. 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Fax (909) 627-7449 Web Site: DescoIndustries.com
相关PDF资料 |
PDF描述 |
|---|---|
| 10415 | ANTISTATIC SPRAY REZTORE 1QT. |
| 10438 | CLEAN REZTORE SURFACE&MAT 2.5GAL |
| 10520 | FINISH FLOOR STATGUARD 55GAL |
| 10601 | WIPES ANTISTATC CAN OF 60, 12 CT |
| 12550 | FOAM HIGH DENSITY 3/4" 24X36 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 10-409 | 制造商:STANLEY 功能描述:KNIFE 9MM 制造商:The Stanley Works 功能描述:KNIFE, 9MM 制造商:STANLEY 功能描述:KNIFE, 9MM; Knife Type:Snapoff; Blade Material:Stainless Steel; Blade Length:135mm; Blade Width:9mm ;RoHS Compliant: NA |
| 104090000 | 功能描述:Red, Green, Blue (RGB) LED Indication - Discrete 2.1V Red, 3.15V Green, 3.15V Blue Radial 制造商:seeed technology co., ltd 系列:- 包装:散装 零件状态:过期 颜色:红，绿，蓝（RGB） 透镜颜色:无色 透镜透明度:透明 毫烛光等级:350mcd 红，1150mcd 绿，600mcd 蓝 透镜样式/尺寸:- 电压 - 正向（Vf）（典型值）:2.1V 红，3.15V 绿，3.15V 蓝 电流 - 测试:20mA 红， 20mA 绿， 20mA 蓝 视角:50° 安装类型:通孔 波长 - 主:- 波长 - 峰值:625nm 红，518nm 绿，466nm 蓝 特性:- 封装/外壳:径向 供应商器件封装:8mm 圆形 大小/尺寸:- 高度（最大值）:11.50mm 标准包装:1 |
| 1040900000 | 制造商:Weidmuller 功能描述:CONN HEADER 22POS 3.81MM BLK R/A |
| 104090102103 | 制造商:Dialight 功能描述:LARGE OIL TIGHT PANEL IND. |
| 104-0901-02-103 | 功能描述:灯座与配件 OIL TIGHT PANEL IND RoHS:否 制造商:Chicago Miniature 产品:PMI Base 灯类型:Incandescent, Neon 灯大小:T-2, T-3 1/4 灯座类型:Miniature Bayonet 封装:Bulk |
发布紧急采购，3分钟左右您将得到回复。