参数资料
| 型号： | 10520 |
| 厂商： | Desco |
| 文件页数： | 1/10页 |
| 文件大小： | 0K |
| 描述： | FINISH FLOOR STATGUARD 55GAL |
| 标准包装： | 1 |
| 系列： | Statguard® |
| 处理剂/清洁剂类型： | 抗静电地板涂层 |
| 使用： | 地板 |
| 技术规格： | 10&sup7; ~ 10&sup9;表面电阻系数 |
| 数量： | 55 加仑 |
| 包装： | 鼓 |
TB-7042 November 2013 Page 1 of 10
Statguard
Static Dissipative Floor Finish
Application Instructions & MSDS
General Guidelines
Statguard Floor Finish eliminates triboelectric
generated charges above 100V before costly damage
can occur from personnel who approach static
sensitive parts and products. Statguard also drains
static charges from personnel who forget to reattach
their wrist straps minimizing the damage that could
occur from handling. Even when using conductive tiles,
a substantial triboelectric charge may be generated.
When Statguard Floor Finish is applied over
conductive tiles, the enhanced floor tile limits charge
generation, for example, due to a person walking
across the floor.
Generally accepted industrial stripping and floor finish
application procedures are to be followed as outlined
on pages 2 and 3 in this technical bulletin. Note: to
avoid contamination finish mop and bucket should be
dedicated to Statguard Floor Finish use only.
NOTE: Statguard Static Dissipative Floor Care products
do not have a set life span. The chemicals are not known to
degrade over time when stored at the proper temperature
conditions as stated in the Material Safety Data Sheet.
We also recommend that these products be stored in their
original containers and be sealed when not in use.
GROUNDING
Conventional grounding practices like electrically
connecting Statguard Dissipative Floor Finish to
ground is only required for applications of static
dissipative floor finish that are less than 50 square
feet. For applications that are greater than 50 square
feet, the capacitance of Statguard Floor Finish is
MANY, MANY times greater than the capacitance of
the human body model. The difference in capacitance
is so great that the Statguard treated floor acts as a
theoretical reservoir or natural ground. The capacitance
and surface resistance of the Statguard treated floor
will decay a 5000v charge to zero in .05 sec. per FTMS
101B, Method 4046. Statguard has substantially less
than the maximum static decay time of 0.1 seconds.
Per ESD Handbook ESD TR20.20 section 5.3.4.2
“Floor finishes and topical antistats, function by two
separate mechanisms. First they reduce the surface’s
tendency to generate a static charge. Second, they
provide a path for the dissipation of charge. The
charge may dissipate over the surface of the finish or it
may dissipate to ground if the floor finish is grounded.”
To remove charge from personnel, ESD footwear
is to be used in conjunction with ESD flooring. ESD
footwear should be worn on both feet.
Figure 1. Statguard Static Dissipative Floor Finish
Description
Statguard Static Dissipative Cross-Linked Floor
Finish is used to dissipate static charges as well as
limit triboelectric (static charge generation) charges
while providing a clear, high gloss finish that resists
wear. Statguard Static Dissipative Floor Finish is a
free flowing liquid cross-linked emulsion, which can be
applied on any hard surface or sealed floor including
vinyl, vinyl asbestos, linoleum, rubber, asphalt, sealed
or painted wood, terrazzo and concrete. Statguard
technology eliminates the need for static control
tile or floor mats. Statguard Floor Finish dries in
approximately one hour and is ideal for clean room
and electronic manufacturing, assembly, and test
areas. For use in environments with relative humidity of
30-65%.
SAFE WALKING SURFACE
UL Classified as to slip resistance only. Statguard
provides superior electrical properties along with
a safe walking surface. Underwriters Laboratory
has evaluated Statguard and tested it to their slip
resistance standards. To ensure employee safety
and to mitigate user’s liability exposure, it is important
to use floor finish that has been successfully tested
for slip resistance, and is properly installed and
maintained.
2013 DESCO INDUSTRIES, INC.
Employee Owned
DESCO INDUSTRIES INC. Technical Bulletin TB-7042
Made in the
United States of America
DESCO INDUSTRIES INC.
3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Web Site: DescoIndustries.com
相关PDF资料 |
PDF描述 |
|---|---|
| 10601 | WIPES ANTISTATC CAN OF 60, 12 CT |
| 12550 | FOAM HIGH DENSITY 3/4" 24X36 |
| 12668 | FOAM LOW DENSITY DISSIPATIVE |
| 12782 | BAG ESD SHIELD 6X10 METAL-IN GRN |
| 13070 | BAG SHIELD METAL-OUT 8X12 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 105-20 | 制造商: 功能描述: 制造商:undefined 功能描述: 制造商:. 功能描述: |
| 1052000000 | 功能描述:2 位 端接块 接头 0.197"（5.00mm） 垂直式 制造商:weidmuller 系列:Omnimate SL 包装:散装 零件状态:有效 类型:接头 针脚数:2 每级针脚数:2 级别数:1 间距:0.197"（5.00mm） 针座方向:垂直式 插线入口:- 端子类型:- 安装类型:- 电流 - IEC:- 电压 - IEC:- 电流 - UL:- 电压 - UL:- 线规或范围 - AWG:- 线规或范围 -?mm2:- 颜色:黑 工作温度:- 触头配接表面处理:- 特性:- 标准包装:1,000 |
| 1052000001 | 功能描述:SMIA55 CAMERA SOCKET BOTTOM CONT 制造商:molex, llc 系列:105200 包装:带卷（TR） 零件状态:有效 类型:相机插口 针脚或引脚数（栅格）:12（2 x 6） 间距 - 配接:0.028"（0.70mm） 触头表面处理 - 配接:金 触头表面处理厚度 - 配接:12μin（0.30μm） 触头材料 - 配接:铜合金 安装类型:表面贴装，通孔板式 特性:开放框架 端接:焊接 间距 - 柱:0.028"（0.70mm） 触头表面处理 - 柱:金 触头表面处理厚度 - 柱:闪存 触头材料 - 柱:铜合金 外壳材料:热塑塑胶 工作温度:-55°C ~ 85°C 端接柱长度:- 材料可燃性等级:UL94 V-0 额定电流:0.5A 接触电阻:- 标准包装:2,700 |
| 1052000008 | 制造商:Molex 功能描述:SMIA55 CAMERA SOCKET BOTTOM CONTACT 0.75 - Trays |
| 105200-0008 | 制造商:MOLEX 功能描述:SMIA55 CAMERA SOCKET BOTTOM C NTACT 0.75 制造商:Molex 功能描述: 制造商:Molex 功能描述:SMIA55 Camera Socket Bottom Contact 0.75 |
发布紧急采购，3分钟左右您将得到回复。