参数资料
| 型号： | 10520 |
| 厂商： | Desco |
| 文件页数： | 4/10页 |
| 文件大小： | 0K |
| 描述： | FINISH FLOOR STATGUARD 55GAL |
| 标准包装： | 1 |
| 系列： | Statguard® |
| 处理剂/清洁剂类型： | 抗静电地板涂层 |
| 使用： | 地板 |
| 技术规格： | 10&sup7; ~ 10&sup9;表面电阻系数 |
| 数量： | 55 加仑 |
| 包装： | 鼓 |
TB-7042 Page 3 of 10
Equipment needed:
Push broom
Single pad 175 rpm swing floor machine (with a
black or brown stripping pad)
Mops (do not use the same mop for stripper and for
floor finish)
Buckets (do not use the same bucket for stripper
and for floor finish)
Statguard Floor Stripper
Wet vacuum
1. Sweep away all loose dirt and trash.
2. Mix Statguard Floor Stripper 3:1 three (3) parts
WARM water to one (1) part stripper.
3. Apply stripper liberally to around 200 square foot
area in need of stripping. Using a cotton string mop,
uniformly distribute the solution. Let the solution
stand for 5-15 minutes. Do not let it dry.
Figure 3. Stripping the floor
4. Scrub the floor with the floor machine at 175 rpm
(using a stripping pad soaked in stripping solution).
Work methodically, with at least two passes over
each area of the floor.
5. After scrubbing, pick up the solution with a wet vac
or mop.
6. Flood rinse the floor with clean, clear water.
Note: Using Statguard Floor Neutralizer can
reduce the number of rinse steps needed to get the
floor to pH level 7.0 (neutral).
7. Pick up the rinse water with a wet vac or mop.
8. Repeat steps 5 and 6. Entire floor should be rinsed
twice.
9. Damp mop the floor at least twice with clean mop
and clean water (change rinse water frequently to
ensure that all stripper solution residue is removed),
and let dry.
2013 DESCO INDUSTRIES, INC.
Employee Owned
DESCO INDUSTRIES INC.
3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Web Site: DescoIndustries.com
10. Visually inspect floor to be sure all stripper and old
polish (shiny spots) have been removed and test pH
level.
It is recommended to test the stripped surfaces after
the second rinse to ensure that high pH residues
are rinsed away. Some high pH strippers will leave a
residue behind even after several rinses. A high pH
can negatively affect the floor finish curing time as well
as other properties of the finish. To test for high pH
residue, test either the rinse water or the floor using
either a pH measuring instrument or a piece of pH
indicating litmus paper. A safe PH will be 7.0 (neutral).
Statguard Floor Finish Application
It is recommended that you apply two coats of
Statguard Floor Finish. After stripping the factory
finish, new tile will have an initial high porosity and will
require three coats on first application. For known high
traffic applications, three coats are recommended for
extended life.
If Statguard freezes, allow it to thaw to 70° F and
mix completely before application.
Figure 4. Applying floor finish.
Figure 5. Applying floor finish with Flat Mop (optional).
相关PDF资料 |
PDF描述 |
|---|---|
| 10601 | WIPES ANTISTATC CAN OF 60, 12 CT |
| 12550 | FOAM HIGH DENSITY 3/4" 24X36 |
| 12668 | FOAM LOW DENSITY DISSIPATIVE |
| 12782 | BAG ESD SHIELD 6X10 METAL-IN GRN |
| 13070 | BAG SHIELD METAL-OUT 8X12 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 105-20 | 制造商: 功能描述: 制造商:undefined 功能描述: 制造商:. 功能描述: |
| 1052000000 | 功能描述:2 位 端接块 接头 0.197"（5.00mm） 垂直式 制造商:weidmuller 系列:Omnimate SL 包装:散装 零件状态:有效 类型:接头 针脚数:2 每级针脚数:2 级别数:1 间距:0.197"（5.00mm） 针座方向:垂直式 插线入口:- 端子类型:- 安装类型:- 电流 - IEC:- 电压 - IEC:- 电流 - UL:- 电压 - UL:- 线规或范围 - AWG:- 线规或范围 -?mm2:- 颜色:黑 工作温度:- 触头配接表面处理:- 特性:- 标准包装:1,000 |
| 1052000001 | 功能描述:SMIA55 CAMERA SOCKET BOTTOM CONT 制造商:molex, llc 系列:105200 包装:带卷（TR） 零件状态:有效 类型:相机插口 针脚或引脚数（栅格）:12（2 x 6） 间距 - 配接:0.028"（0.70mm） 触头表面处理 - 配接:金 触头表面处理厚度 - 配接:12μin（0.30μm） 触头材料 - 配接:铜合金 安装类型:表面贴装，通孔板式 特性:开放框架 端接:焊接 间距 - 柱:0.028"（0.70mm） 触头表面处理 - 柱:金 触头表面处理厚度 - 柱:闪存 触头材料 - 柱:铜合金 外壳材料:热塑塑胶 工作温度:-55°C ~ 85°C 端接柱长度:- 材料可燃性等级:UL94 V-0 额定电流:0.5A 接触电阻:- 标准包装:2,700 |
| 1052000008 | 制造商:Molex 功能描述:SMIA55 CAMERA SOCKET BOTTOM CONTACT 0.75 - Trays |
| 105200-0008 | 制造商:MOLEX 功能描述:SMIA55 CAMERA SOCKET BOTTOM C NTACT 0.75 制造商:Molex 功能描述: 制造商:Molex 功能描述:SMIA55 Camera Socket Bottom Contact 0.75 |
发布紧急采购，3分钟左右您将得到回复。