- 您现在的位置：买卖IC网 > Datasheet目录590 > 11-01-0185 (Molex Connector Corporation)TOOL HAND CRIMP .100 TERM RACHET Datasheet资料下载
参数资料
| 型号： | 11-01-0185 |
| 厂商： | Molex Connector Corporation |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND CRIMP .100 TERM RACHET |
| 其它有关文件： | Overlap Style Insulation Crimps |
| 标准包装： | 1 |
| 系列： | KK® |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 矩形触点，22-30 AWG |
| 特点： | 侧面插入，棘齿 |
| 其它名称： | 0011-01-0185 0011-01-0185-E 0011010185 0011010185-E 11-01-0185-E 11010185 11010185-E CR2262C WM9915 |
Hand Crimp Tool for .100 KK
OPERATION
Open the tool by squeezing the handles together, at the end of the
closing stroke, the ratchet mechanism will release the handles, and the
hand tool will spring open.
Crimping Terminals
1. Lift the locator blade and place the terminal into the correct die
profile (A or B), release the locator blade. Not all tools are
equipped with a locator or locator blade.
Figure 1
2. Partially close the tool until the terminal is
held in place, (See Figure 2).
3. Place a wire into the terminal and up against the
locator blade, (See Figure 3). On tools without
locators line the wire up with the conductor and
insulation grips visually.
4. Close the tool until the ratchet releases,
(See Figure 4).
5. Lift the locator blade or wire stop up.
6. Carefully remove the crimped terminal.
Figure 2
Maintenance
It is recommended that each operator of the tool be made aware of,
and responsible for, the following maintenance steps:
1. Remove dust, moisture, and other contaminants with a clean
brush, or soft, lint free cloth.
Figure 3
2. Do not use any abrasive materials that could damage the tool.
3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high
quality machine oil. Do not oil excessively.
4. When tool is not in use, keep the handles closed to prevent objects from becoming lodged in the crimping
dies, and store the tool in a clean, dry area.
Miscrimps or Jams
Should this tool ever become stuck or jammed in a partially closed position, Do Not force the handles open or
closed . The tool will open easily by lifting the ratchet release lever (See Figure 4).
Doc No. 11-01-0185
Revision: E
Release Date: 10-07-03
Revision Date: 08-11-04
UNCONTROLLED COPY
Page 4 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 1102855-3 | TOOL EXTRACTION SOLARLOK |
| 1116571-1 | CUTTER SIDE TAPERED FLUSH 4.88" |
| 1120380003 | DIGITAL MOD 4PORT 8OUTPUTS PNP |
| 1120380005 | DIGITAL MOD 4PORT 4IN 4OUT NPN |
| 1120380006 | DIGITAL MOD 4PORT 4IN 4OUT PNP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 11-01-0185 REPAIR | 制造商:MOLEX 功能描述: |
| 11-01-0185 | 制造商:Molex 功能描述:TOOLSCRIMPHANDHAND CRIMPER 22/24/26/ |
| 11-01-0189 | 功能描述:折皱器 CRIMP HANDTOOL 22-28 RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 11-01-0193 | 功能描述:折皱器 SPOX CRIMPER 18-24 RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 11-01-0194 | 功能描述:折皱器 HAND CRIMP TOOL RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
发布紧急采购，3分钟左右您将得到回复。