参数资料
| 型号： | 118213-4 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/7页 |
| 文件大小： | 0K |
| 描述： | HSG-RECP ECONOMATE 2 |
| 标准包装： | 1,000 |
| 系列： | Economate II |
| 连接器类型： | 插座 |
| 请注意： | 不提供触点 |
Product
Specification
108-12057
07Aug08 Rev E
All Paragraphs Revised
ECONOMATE II Connector Receptacle and Blade Header
Assembly
1.
1.1.
1.2.
2.
SCOPE
Content
This specification covers perform ance, tests and quality requirem ents for the Tyco Electronics
ECONOMATE II Connector Assem bly.
Qualification
W hen tests are perform ed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be perform ed using the applicable inspection plan and product drawing.
APPLICABLE DOCUM ENTS
The following Governm ent docum ents form a part of this specification to the extent specified herein.
Unless otherwise specified, the latest edition of the docum ent applies. In the event of conflict between
the requirem ents of this specification and the product drawing, the product drawing shall take
precedence. In the event of conflict between the requirem ents of this specification and the referenced
docum ents, this specification shall take precedence.
!
!
!
!
!
!
MIL-C-28754: Connectors, Electrical, Modular, and Com ponent Parts General Specification for
MIL-C-45662: Calibration of Standards
MIL-W -16867: W ire, Electrical, Insulated High Tem perature
MIL-STD-105: Sam pling Procedures and Tables for Inspection by Attributes
MIL-STD-202: Test Methods for Electronic and Com ponent Parts
MIL-STD-1285: Marking of Electrical and Electronic Parts
3.
3.1.
3.2.
3.3.
REQUIREM ENTS
Design and Construction
Product shall be of the design, construction and physical dim ensions specified on the applicable product
drawing. W hen required, each connector shall be identified by part num ber and date coded in
accordance with applicable portions of MIL-STD-1285.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
!
Voltage: 800 volts rm s
Current: 3 am peres m axim um unless otherwise restricted by the PCB or circuit wiring
Tem perature: -55 to 105 / C
3.4.
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions. Measurem ents shall be taken using instrum ents that have been calibrated in accordance
with MIL-C-45662.
?2008 Tyco Electronics Corporation
Harrisburg, PA
All International Rights Reserved.
* Trademark
| Indicates change
For latest revision, visit our website at www.tycoelectronics.com\documents.
For Regional Customer Service, visit our website at www.tycoelectronics.com
1 of 7
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 118438-1 | CONN RCPT 53POS .100 GOLD |
| 119272-8 | CONN RCPT CONTACT .100 GOLD |
| 1217001-1 | CONN RCPT/TAB FAST 20-16AWG .187 |
| 1217002-1 | CONN UNINSUL TAB 0.250 |
| 1217003-1 | CONN UNINS RECPT 14-18AWG 0.110 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 11821-CK | 制造商:Thomas & Betts 功能描述:11821 DIE FOR #10 INSULATED CK LUGS |
| 1182-1INX18YDS | 制造商:3M Electronic Products Division 功能描述:80610875926 |
| 11821U | 制造商:RAY ENGINEERING 功能描述:INDEX PLUNGER,REST,6MM |
| 11822 | 制造商:Thomas & Betts 功能描述:WT-117 DIE SET 制造商:Thomas & Betts 功能描述:Plier Type Tools |
| 11-822 | 功能描述:SKT PHLP BIT 3/8DR #2 制造商:apex tool group 系列:* 零件状态:在售 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。