参数资料
型号: 12864-12-BN-R-ET-ELP
厂商: Electronic Theatre Controls, Inc.
英文描述: 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
中文描述: 128 × 64点阵超扭曲液晶显示大会与T - 6963C图形控制器的LED /冷光片背光
文件页数: 31/31页
文件大小: 477K
代理商: 12864-12-BN-R-ET-ELP
SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE
To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.
o
Be sure to ground the body when handling the LCD modules.
o
Tools required for assembling, such as soldering irons, must be properly grounded.
o
To reduce the amount of static electricity generated, do not conduct assembling and other work under dry
conditions.
o
The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this
protective film since static electricity may be generated.
MODEL NO: 12864-12
PACIFIC DISPLAY DEVICES
07.21.2006
31
Storage
Cleaning
When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps
Store the module in a dark place where the temperature is 25
o
C ±10
o
C and the humidity below 65% RH.
Do not store the module near organic solvents or corrosive gases.
Do not crush, shake, or jolt the module (including accessories).
Do not wipe the polarizing plate with a dry cloth, as it may scratch the surface.
Wipe the module gently with soft cloth soaked with a petroleum benzene.
Do not use ketonic solvents (ketone and acetone) or aromatic solvents (toluene and xylene), as they may damage the
polarizing plate.
Others:
Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation
or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low
temperature.
If the LCD modules have been operating for a long time showing the same display patterns, the display patterns may
remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can
be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect
performance reliability.
To minimize the performance degradation of the LCD modules resulting from destruction caused by static electricity
etc., exercise care to avoid holding the following sections when handling the modules.
-
Exposed area of the printed circuit board.
-
Terminal electrode sections.
相关PDF资料
PDF描述
12864-12-BN-R-ST-ELED 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-BN-R-ST-ELP 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-FC-F-ET-ELED 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-FC-F-ET-ELP 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-FC-F-ST-ELED 128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
相关代理商/技术参数
参数描述
12864-12-BN-R-ST-ELED 制造商:未知厂家 制造商全称:未知厂家 功能描述:128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-BN-R-ST-ELP 制造商:未知厂家 制造商全称:未知厂家 功能描述:128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-FC-F-ET-ELED 制造商:未知厂家 制造商全称:未知厂家 功能描述:128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-FC-F-ET-ELP 制造商:未知厂家 制造商全称:未知厂家 功能描述:128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight
12864-12-FC-F-ST-ELED 制造商:未知厂家 制造商全称:未知厂家 功能描述:128 x 64 Dot STN Graphic LCD Assembly With T-6963C Graphics Controller LED / EL Panel Backlight