- 您现在的位置：买卖IC网 > Datasheet目录593 > 1424035-1 (TE Connectivity)TOOL 180DEG CABLE CLAMP ASSY Datasheet资料下载
参数资料
| 型号： | 1424035-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | TOOL 180DEG CABLE CLAMP ASSY |
| 标准包装： | 1 |
| 系列： | * |
180° Cable Clamp
Assembly 1424035-1
Fitting
Air-Activated
Cylinder
Jaw
Instruction Sheet
408-8340
24 MAY 12 Rev B
Cable Clamp
Bracket
Indicator
Cam Track
Cam
Figure 1
Clamp
Bracket
Wire Holder
All dimensions on this sheet are in millimeters [with
inch equivalents in brackets]. Figures and
i
Make sure to retain all material in the bench
terminating machine documentation package for
i
Make sure that the cable assembly does not get
!
1. INTRODUCTION
The 180° Cable Clamp Assembly 1424035-1 is
designed to be used in CHAMPOMATOR* 2.5 Bench
Terminating Machine 762734-[ ]. The machine must be
equipped with a clamp solenoid valve (shown in
Figure 4) and a controller having software at
Rev. 3.03.05 or later. To use the machine without
these requirements, use 180° Cable Clamp Assembly
768830-1 and follow the instructions packaged with
that cable clamp.
The cable clamp permits the machine to apply
discrete-wire jacketed cable to AMPLIMITE* .050
Series connectors, AMPLIMITE HDE connectors,
CHAMP* connectors, and AMPMODU* MT
connectors.
NOTE
illustrations are for identification only and are not
drawn to scale.
NOTE
reference. For detailed information on the operation
of the machine, refer to Customer Manual
409-5839 which is supplied with the machine.
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
2. DESCRIPTION (Figure 1)
The cable clamp is capable of being adjusted to give a
1805 cable breakout, and it can also be offset for the
angle-exit option when applying AMPLIMITE .050
Series connectors with the machine.
During operation, the operator places the cable into
the cable clamp, and places the wires in the wire
holder, which holds the cable wires in place during the
termination process, helping to keep the loose wires
out of the operator's way.
As the wires are terminated, the clamp follows the cam
track and moves to provide the desired breakout
length. The clamp eventually bottoms in the cam track,
determining the position of the cable with respect to
the connector.
After all terminations have been completed, the
machine moves to the forward home position. At this
time, the operator unclamps the cable, then presses
the machine's “INDEX” and “LOAD” buttons. The
machine carriage and cable clamp then move to their
respective home positions, permitting the operator to
remove the completed cable assembly from the
machine.
CAUTION
caught on the cable clamp, or damage to the cable
assembly could result. This is particularly important
when processing the second-end connector on a
short cable assembly.
?2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 3
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners.
相关PDF资料 |
PDF描述 |
|---|---|
| 1435491-1 | TOOL EXTRACTOR AMPTRAC PCB |
| 1437000-6 | HAND TOOL FRAME W/O DIE SET |
| 1457628-1 | OVEN BLOCK ASSEMBLY LC |
| 1457630-2 | FIBER PROTECTOR JACKET 12@PK |
| 1463260-1 | TOOL HAND FOR 025 TAB/RCPT CONT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 142-40-422-00-591000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .210L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 142-40-422-00-592000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .335L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 142-40-422-00-593000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .585L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 142-40-422-00-594000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .835L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 1424050-1 | 功能描述:冲压机与冲模 PREMIUM SDE DIE BNC RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
发布紧急采购，3分钟左右您将得到回复。