- 您现在的位置：买卖IC网 > Datasheet目录593 > 1424035-1 (TE Connectivity)TOOL 180DEG CABLE CLAMP ASSY Datasheet资料下载
参数资料
| 型号： | 1424035-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/3页 |
| 文件大小： | 0K |
| 描述： | TOOL 180DEG CABLE CLAMP ASSY |
| 标准包装： | 1 |
| 系列： | * |
408-8340
3. INSTALLATION
It is necessary to open or remove machine covers
STOP
DANGER
to perform the following procedure. Be sure to
replace ALL covers BEFORE operating the
machine.
The cable clamp's pivot bracket attaches to the
machine carriage, and the cam track assembly
mounts to the machine's base block assembly. To
mount the clamp:
1. Turn off the machine's air supply by disengaging
the air supply at the back of the machine.
2. Turn off the machine's electrical functions by
switching the rocker switch on the back of the
machine's control module.
Dimension “A”
(See Table)
Mounting
Screw
DANGER
STOP
DO NOT make adjustments to the machine or the
cable clamp while the machine is operational. Make
sure to disable the machine to prevent it from
moving while adjustments are being made.
Base Block
Assembly (Ref)
3. Attach the pivot bracket to the back of the
machine carriage with the No. 10-32 screws
provided. Refer to Figure 2. Using a 5/32-in. hex
wrench, tighten the screws.
CONNECTOR
DIMENSION “A”
TYPE
AMPLIMITE .050
SIZE
20
40
50
68
80
STRAIGHT
EXIT
2.54 [.100]
5.58 [.220]
8.38 [.330]
13.20 [.520]
17.01 [.670]
ANGLE
EXIT
1.27 [.050]
13.97 [.550]
15.24 [.600]
26.67 [1.050]
34.29 [1.350]
Pivot
Bracket
Screws and
Washers
AMPLIMITE HDE
CHAMP
100
120
All
All
23.62 [.930]
33.52 [1.320]
18.54 [.730]
46.99 [1.850]
55.88 [2.200]
---
Figure 3
7. On the machine, plug the air hose from the clamp
solenoid valve (see Figure 4) onto the fitting of the
Carriage
Figure 2
cable clamp (refer to Figure 1).
8. Turn on the air to the machine, and inspect the
cable clamp for air leaks.
4. TOOLING ADJUSTMENTS
4. Slide the bottom of the cam track assembly onto
the rack portion of the base block assembly. Make
sure that the cam track assembly mounting screw is
raised to allow the cam track to slide.
DANGER
STOP
To avoid personal injury, DISCONNECT air and
electric power before making adjustments to the
machine or cable clamp. DO NOT make
adjustments while the machine is operational.
5. Adjust the position of the cam track assembly to
Dimension A shown in Figure 3 to ensure that the
cable is located for either straight exit or angle exit.
6. Using a 5/32-in. hex wrench, tighten the mounting
screw to secure the cam track.
Rev B
4.1. Cable Clamp Position
The position of the cable clamp can be adjusted to
vary the cable exit position relative to the connector.
To adjust this position, refer to Figure 3, and proceed
as follows:
2 of 3
相关PDF资料 |
PDF描述 |
|---|---|
| 1435491-1 | TOOL EXTRACTOR AMPTRAC PCB |
| 1437000-6 | HAND TOOL FRAME W/O DIE SET |
| 1457628-1 | OVEN BLOCK ASSEMBLY LC |
| 1457630-2 | FIBER PROTECTOR JACKET 12@PK |
| 1463260-1 | TOOL HAND FOR 025 TAB/RCPT CONT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 142-40-422-00-591000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .210L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 142-40-422-00-592000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .335L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 142-40-422-00-593000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .585L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 142-40-422-00-594000 | 功能描述:集管和线壳 22P DIP HDR OPEN FRAME .835L RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 1424050-1 | 功能描述:冲压机与冲模 PREMIUM SDE DIE BNC RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
发布紧急采购，3分钟左右您将得到回复。