- 您现在的位置：买卖IC网 > Datasheet目录593 > 1490700-1 (TE Connectivity)DIE ASSEMBLY TERMINYL 1/0 BLUE Datasheet资料下载
参数资料
| 型号： | 1490700-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | DIE ASSEMBLY TERMINYL 1/0 BLUE |
| 标准包装： | 1 |
| 系列： | * |
| 配用： | 55822-1-ND - CONN RING TONG 1/0AWG #1/4 324058-ND - CONN RING TONG 1/0AWG #1/2 55821-1-ND - CONN RING 1/0AWG #1/4 A27396-ND - CONN RING 1/0 AWG #3/8 TREMINYL A27395-ND - CONN RING 1/0 AWG #1/4 TERMINYL |
| 相关产品： | 1976230-1-ND - HYDRAULIC CRIMPING HEAD ASS Y 1490746-1-ND - TOOL 14 TON CRIMPING HEAD 1490749-1-ND - CRIMP TOOL HYDRAULIC |
7. To crimp the other half of splice, reposition
uncrimped end of splice in the stationary die and
follow the same procedure used to crimp the first
half of splice.
8. Inspect the crimp according to Section 5.
Figure 4
1. Strip wires to the dimensions listed in Figure 3.
Do not nick or cut the wire strands.
2. Select the proper color–coded splice for the wire
size. The wire size stamped on the splice and on
the crimping die must match the wire size selected.
3. Insert the stripped wire into the wire barrel of the
end of the splice to be crimped until the wire
bottoms against the wire stop within the splice.
4. Place the splice in the stationary die. Grasp the
end of the splice to be crimped and point the
opposite end toward the top of the head yoke at
approximately a 30 angle. Rotate the end of the
splice to be crimped into the die. Position the edge
of the window indent against the locator. Refer to
Figure 5.
5. Holding wire in place, activate tool or power unit
to complete first wire barrel crimp.
6. When crimp is completed, remove the latch pin,
open the yoke and remove the splice.
Figure 5
1. Strip wires to the dimensions listed in Figure 3.
Do not nick or cut the wire strands.
2. Select the proper splice, adapter, and crimping
die for the wire size. See Figure 6. Note that the
end of the splice containing the adapter has a
different color code. Use the crimping die for the
larger wire size to crimp both ends of the splice.
For example, use Crimping Die 1490598–1 (for
wire size 6 AWG) to crimp both ends of the splice
with step–down adapter for stepping down from
wire size 6 to 8 AWG.
相关PDF资料 |
PDF描述 |
|---|---|
| 1490746-1 | TOOL 14 TON CRIMPING HEAD |
| 14A-56-10 | XFRMR PWR 115/230V 5VAC 11.2A |
| 14A-56-515 | XFRMR PWR 115/230V 5V 3A 56VA |
| 1534858-1 | STORAGE BOX SOLARLOK-BAG ASSY |
| 1579001-3 | TOOL DIE SET FOR UMNL TERMINALS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 149071-000 | 制造商:TE Connectivity 功能描述:Heat Shrink Tubing ST Polyolefin Black Medium Loose Piece |
| 1490716-1 | 功能描述:冲压机与冲模 DIE ASSY COPALUM IP #4 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 1490717-1 | 功能描述:冲压机与冲模 DIE ASSY COPALUM IP #2 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 1490718-1 | 功能描述:冲压机与冲模 DIE ASSY, COPALUM IP, #1/0 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 1-490722-98S | 功能描述:Circular Connector 制造商:amphenol industrial operations 系列:- 包装:- 零件状态:有效 连接器类型:- 针脚数:- 外壳尺寸 - 插件:- 外壳尺寸，MIL:- 安装类型:- 端接:- 紧固类型:- 朝向:- 侵入防护:- 外壳材料，镀层:- 触头镀层:- 特性:- 触头镀层厚度:- 额定电流:- 电压 - 额定:- 工作温度:- 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。