- 您现在的位置：买卖IC网 > Datasheet目录593 > 1490746-1 (TE Connectivity)TOOL 14 TON CRIMPING HEAD Datasheet资料下载
参数资料
| 型号： | 1490746-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | TOOL 14 TON CRIMPING HEAD |
| 标准包装： | 1 |
| 配用： | 1752681-3-ND - INDENT U-DIE SOLIS FLAG 6-2AWG 1752681-2-ND - INDENT U-DIE SOLIS FLAG 8AWG 1752681-1-ND - INDENT U-DIE SOLS FLAG 1/0-4/0 1752680-8-ND - NEST U-DIE SOLISTRAND FLAG 8AWG 1752680-7-ND - NEST U-DIE SOLISTRAND FLAG 6AWG 1752680-6-ND - NEST U-DIE SOLISTRAND FLAG 4AWG 1752680-5-ND - NEST U-DIE SOLISTRAND FLAG 2AWG 1752680-4-ND - NEST U-DIE SOLISTRAND FLAG 1/0 1752680-3-ND - NEST U-DIE SOLISTRAND FLAG 2/0 1752680-2-ND - NEST U-DIE SOLISTRAND FLAG 3/0 更多... |
| 相关产品： | 1804700-2-ND - PUMP HYDRAULIC HEAVY DUTY 1804700-1-ND - PUMP HYDRAULIC HEAVY DUTY 1583661-1-ND - HAND HYDRAULIC PUMP 1583659-1-ND - FOOT HYDRAULIC PUMP |
Hydraulic Crimping Head 1490746- 1
Instruction Sheet
408-- 8714
10 MAR 10 Rev A
Upper Die
Release
Button
“C”-- Head
NOTE
i
Dimensions on this document are in metric units
[with U. S. customary units in brackets], unless
otherwise specified. Figures and illustrations are
for reference only and are not drawn to scale.
Die
Retaining
Pins
Ram
Lower Die
Release
Button
Cylinder
2. DESCRIPTION (Figure 1)
Main components of Hydraulic Crimping Head
1490746--1 include a “C”--head, which houses the
stationary die, the upper and lower die release
buttons which release the dies, a cylinder which
contains the head’s hydraulic chamber, a piston (ram)
which holds and controls the moving die, and a
quick--disconnect coupling (cylinder half) which mates
with the coupling on the hose to release or supply
pressure. A dust cap covers the quick--disconnect
coupling.
!
Quick-- Disconnect
Coupling
Figure 1
Dust Cap
3. INSTALLATION
3.1. Head Installation
CAUTION Prior to installing the head, ensure that the pump
and hose being used are working properly, and
are adjusted to and rated at 10,000 psi. An
incorrectly adjusted or rated pump/hose could
result in severe tooling damage, as well as
personal injury.
TERMINALS
6 Through 4/0
408--8703
8 Through 4/0
408--8691
8 Through 1/0
408--8704
8 Through 2
408--8705
!
i
1. INTRODUCTION
This instruction sheet provides operation and
maintenance instructions for the 14 Ton Hydraulic
Crimping Head 1490746--1. See Figure 1.
The crimping head is designed to use dies that crimp
the terminals in Figure 2. Figure 2 also lists the wire
sizes onto which the terminals and splices are
crimped, as well as the instruction sheet for the
crimping dies.
WIRE SIZE INSTRUCTION
(AWG) SHEET
AMPOWER*
Terminals and Splices
SOLISTRAND*
Terminals and Splices
TERMINYL*
Terminals and Splices
AMPLI--BOND*
Terminals and Splices
Figure 2
1. Release the hydraulic pressure to the hose.
Disconnect electric power unit from power supply.
2. Remove protective dust caps.
3. Thoroughly clean the coupling on the
pump/hose and the coupling on the crimping head.
4. Mate both quick--disconnect couplings and
tighten the collar of the coupler assembly on the
hose.
CAUTION Oil flow must be unobstructed between the power
unit and the crimping head. Ensure that all
couplings are fully mated and tightened.
NOTE If a crimping head must be removed after the
power unit was in operation, be sure to release
the pressure in the hydraulic system. When
using Hydraulic Power Unit 1583660--[ ],
DISCONNECT THE POWER UNIT FROM THE
POWER SUPPLY. When using Hydraulic Foot
Pump 1583659--1 or Hydraulic Hand Tool
1583661--1, depress the pressure release pedal
to release pressure.
E 2010 Tyco Electronics Corporation, Berwyn, PA TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111
All Rights Reserved PRODUCT INFORMATION 1-- 800-- 522-- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 3
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 14A-56-10 | XFRMR PWR 115/230V 5VAC 11.2A |
| 14A-56-515 | XFRMR PWR 115/230V 5V 3A 56VA |
| 1534858-1 | STORAGE BOX SOLARLOK-BAG ASSY |
| 1579001-3 | TOOL DIE SET FOR UMNL TERMINALS |
| 1579001-4 | TOOL DIE SET FOR MQS 1.2MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1490747-1 | 功能描述:折皱器 CRIMPING HEAD 12 TON TITANIUM RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 1490747-2 | 制造商:TE Connectivity 功能描述:12 TON TITANIUM CRIMPING HEAD - Bulk |
| 1490748-1 | 功能描述:折皱器 1" COMPRESSION TOOL RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 1490749-1 | 功能描述:折皱器 AMP CRIMP TOO RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 1490751-1 | 功能描述:手工工具 GUARD,GRIPPER, G-TERM VERSION RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
发布紧急采购，3分钟左右您将得到回复。