- 您现在的位置：买卖IC网 > Datasheet目录594 > 1583518-1 (TE Connectivity)TOOL ARBOR FRAME WITH SLIDE Datasheet资料下载
参数资料
| 型号： | 1583518-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | TOOL ARBOR FRAME WITH SLIDE |
| 标准包装： | 1 |
| 系列： | * |
408- 8812
Tool Mounting
Plate
Stuffer
4. ASSEMBLY CONSIDERATIONS
The orientation of the receptacles on the wire must be
considered before termination.
Upper Tool
Mount
Figure 3
The fixtures listed are used to terminate the
wire/cable types listed in Figure 2.
The ribbon cable fixture features a ribbon cable
clamp, and a removable cable stop to allow closed
end, or feed--thru terminations.
The upper tooling fixture is shown in Figure 3.
3. CABLE REQUIREMENTS
Refer to the cable requirements below.
4.1. Standard Method
The standard method of termination is from Position 1
to the last position termination.
4.2. Alternate Method
The alternate method of termination is from Position 1
to the Position 1 termination. Note that this method of
termination necessitates a second wire/cable cut.
Refer to Figure 4.
5. SETUP PROCEDURE
1. Install the upper tooling assembly onto the ram
as shown in Figure 5.
2. Install the screws provided, but do not tighten
completely.
Wire / Cable
AWG
Wire Type
UL Wire Style
3. Install the holding fixture into the slide.
Discrete 30--26 0.991 [.039] OD UL1061
Wire MAX.
Ribbon 30--26 PVC UL2651
Cable Insulation
Refer to application specification 114--13072 for wire
preparation information, and information pertaining to
MTA--50 connectors.
Standard Method
Position 1 to Last Position Termination
Receptacle
Position 1
Indicator
Position 1
Indicator
4. Install the front end stop.
5. Carefully lower the ram until upper tooling fully
engages with holding fixture, and
6. Then tighten the screws to securing the upper
tooling to ram.
7. Adjust the rear end stop screw and tighten the
hex nut.
Alternate Method
Position 1 to Position 1 Termination
Receptacle
Position 1
Indicator
Last
Position
Receptacle
Position 1
Indicator
Receptacle
Figure 4
2 of 4
Rev A
相关PDF资料 |
PDF描述 |
|---|---|
| 1583662-3 | HYDRAULIC HOSE ASSEMBLY 20 FT. |
| 1583684-2 | DIE SET D CONN SIZE 9.0 |
| 1583696-1 | DIE SET MMCX USE WITH A9996-ND |
| 1586343-1 | TOOL EXTRACTION PE SERIES |
| 1586344-1 | TOOL EXTRACTION MICRO MATENLOK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1583526 | 功能描述:重负荷电源连接器 VC-TFS 6-PE RoHS:否 制造商:Hirose Connector 系列:PS2 产品类型:Connectors 位置/触点数量: 端接类型:Crimp 触点材料: 触点电镀:Gold 电压额定值: 电流额定值:300 A 附件类型: |
| 1583527-1 | 功能描述:手工工具 626 SDE ADAPTER NORM RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 158353027 | 功能描述:LED Lighting WL-SWTC White, Warm 2700K 3.2V 350mA 120° 2-SMD, No Lead, Exposed Pad 制造商:wurth electronics inc 系列:WL-SWTC 包装:剪切带（CT） 零件状态:有效 颜色:暖白色 CCT（K）:2700K 85°C 时通量，电流 - 测试:- 25°C 时通量，电流 - 测试:95 lm（标准） 电流 - 测试:350mA 电压 - 正向（Vf）（典型值）:3.2V 不同测试电流时的流明/瓦:85 lm/W CRI（高显色指数）:80（标准） 电流 - 最大值:1A 视角:120° 安装类型:表面贴装 封装/外壳:2-SMD，无引线，裸露焊盘 封装热阻:8°C/W 标准包装:1 |
| 158353030 | 功能描述:LED Lighting WL-SWTC White, Warm 3000K 3.2V 350mA 120° 2-SMD, No Lead, Exposed Pad 制造商:wurth electronics inc 系列:WL-SWTC 包装:剪切带（CT） 零件状态:有效 颜色:暖白色 CCT（K）:3000K 85°C 时通量，电流 - 测试:- 25°C 时通量，电流 - 测试:95 lm（标准） 电流 - 测试:350mA 电压 - 正向（Vf）（典型值）:3.2V 不同测试电流时的流明/瓦:85 lm/W CRI（高显色指数）:80（标准） 电流 - 最大值:1A 视角:120° 安装类型:表面贴装 封装/外壳:2-SMD，无引线，裸露焊盘 封装热阻:8°C/W 标准包装:1 |
| 158353040 | 功能描述:LED Lighting WL-SWTC White, Neutral 4000K 3.2V 350mA 120° 2-SMD, No Lead, Exposed Pad 制造商:wurth electronics inc 系列:WL-SWTC 包装:剪切带（CT） 零件状态:有效 颜色:中性白 CCT（K）:4000K 85°C 时通量，电流 - 测试:- 25°C 时通量，电流 - 测试:110 lm（标准） 电流 - 测试:350mA 电压 - 正向（Vf）（典型值）:3.2V 不同测试电流时的流明/瓦:98 lm/W CRI（高显色指数）:75（标准） 电流 - 最大值:1A 视角:120° 安装类型:表面贴装 封装/外壳:2-SMD，无引线，裸露焊盘 封装热阻:8°C/W 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。