参数资料
| 型号： | 1650152-3 |
| 厂商： | TE Connectivity |
| 文件页数： | 15/17页 |
| 文件大小： | 0K |
| 描述： | CONN PIN #8 CRIMP SILVER |
| 标准包装： | 250 |
| 系列： | ELCON |
| 类型： | 功率 |
| 引脚或插口： | 引脚 |
| 触点终端： | 压接 |
| 包装： | 散装 |
| 其它名称： | A101770 |
114-13206
3.16. Connector Mating and Alignment
The pre-installed guide pins and molded-in guide posts ensure positive mating of connectors. In addition,
because of their symmetrical design, the low power connectors have a polarizing feature: a rib in the guide post
cavity that fits into a notch in the guide post. When fully engaged, the dimension between the pin side connector
and socket side connector must be within the limit provided to ensure full mating. See Figure 14.
When mounted, the float mount design allows blind mating with gatherability up to 2.54 mm [.100 in.].
Low Power Connectors
Polarizing Feature
“A”
Rib in Guide
Post Cavity
Notch in
Guide Post
CONNECTOR
Double Drawer, Top Drawer,
75A and 125A Middle Drawer,
Mini Drawer
Lower Drawer
MATING DIMENSION
“A” (MAX)
12.70 mm [.500 in]
10.16 mm [.400 in.]
Figure 14
3.17. Special Assembly Consideration
The system into which the connectors are installed must support the weight of the drawer when connectors are
engaged (for example, the drawer must bottom on a built-in stop, not on the connector).
3.18. Strain Relief and Wire Dress
If required, wires can be bundled together and supported with cable ties. Wires must not be stretched or
confined in any way that would restrict the floating action of the connectors. Therefore, the wires must remain
perpendicular to the connector and avoid an excessively sharp bend radius. The minimum distance for the cable
tie, measured from the wire end of the connector to the cable tie, and the minimum bend radius of a wire bundle
is shown in Figure 15.
152.4 [6.0]
(Min)
Rev E
10 Times Diameter
of Largest Cable
Figure 15
Cable Tie
Connector
15 of 17
相关PDF资料 |
PDF描述 |
|---|---|
| 1766196-1 | CONN CONTACT PIN #12 CRIMP |
| 1766195-1 | CONN PIN SIZE #12 CRIMP |
| 1766193-1 | CONN PIN #12 CRIMP SILVER |
| 166722-1 | CONN SOCKET CRIMP 22-26AWG GOLD |
| DSPIC33FJ128GP802-E/SP | IC DSPIC MCU/DSP 128K 28DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1650152-4 | 功能描述:重负荷电源连接器 701-11-02109 CONTACT PIN #8 RoHS:否 制造商:Hirose Connector 系列:PS2 产品类型:Connectors 位置/触点数量: 端接类型:Crimp 触点材料: 触点电镀:Gold 电压额定值: 电流额定值:300 A 附件类型: |
| 1650153-1 | 制造商:TE CONNECTIVITY 功能描述:701-12-02107=CONTACT,PIN, |
| 1650153-2 | 功能描述:电源到板 CONTACT PIN #12 RoHS:否 制造商:TE Connectivity / AMP 系列:5787444 产品类型:Connectors 触点类型: 电压额定值:50 V 电流额定值: 节距: 位置/触点数量:5 安装风格:Through Hole 端接类型: 触点电镀:Tin |
| 1650153-2 | 制造商:TE Connectivity 功能描述:CONTACT PIN CRIMP |
| 1650153-7 | 功能描述:重负荷电源连接器 701-12-02109 CONTACT PIN #12 RoHS:否 制造商:Hirose Connector 系列:PS2 产品类型:Connectors 位置/触点数量: 端接类型:Crimp 触点材料: 触点电镀:Gold 电压额定值: 电流额定值:300 A 附件类型: |
发布紧急采购，3分钟左右您将得到回复。