参数资料
| 型号： | 19228 |
| 厂商： | Desco |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | MONITOR CONT MULTI-MOUNT |
| 标准包装： | 1 |
| 类型： | 工作站监视器 |
| 使用： | 工作面，腕带监视 |
| 特点： | 连续监视，NIST 可追溯，停放按扣，单芯系统 |
| 电源类型： | AC 适配器 |
| 包括： | AC 适配器，证书，软线，五金件 |
| 其它名称： | 16-1163 |
E. 4mm Parking Snap: When touched by the operator, this
snap will deactivate the alarm for six seconds. This allows
time for the operator to disconnect the coil cord from the
wrist band and park it on this snap. While parked, the coil
cord disables the alarm, allowing the operator to leave the
workstation. The OPERATOR GROUND LED will remain
off while the cord is parked. Upon returning and removing
the coil cord from the parking snap, the operator has six
seconds to hook up to the wrist band before the alarm
sounds.
F. 24 VAC Power Jack: Connect the power adapter here.
G. Mat Connection: Monitors worksurface mat. NOTE: To
disable worksurface monitoring, shunt this terminal to the
neighboring GND terminal with bus wire.
H. Mat Ground: Grounds worksurface mat.
Installation
Remove the monitor from its packaging and inspect for
any shipping damage. Confirm that the work surface is
1 x 107 ohms or less and has a conductive layer such as
Dual Layer Rubber, Dissipative 3-Layer Vinyl, or Micastat
Dissipative Laminate with conductive buried layers.
1. Locate a nearby power outlet and test it for proper wiring
and grounding. We recommend the Desco AC Outlet
Analyzer to verify proper wiring and ground.
2. The Multi-Mount Continuous Monitor may be mounted
to a convenient location using the included mounting
screws or Velcro set. See Figure 3 for installation
set-up.
TB-3054 Page 3 of 5
4. Route the black ground cord to the monitor’s green
terminal block labeled MAT.
5. Route the green ground cord to the monitor’s green
terminal block labeled GND.
6. Connect the power adapter to the monitor’s power jack
labeled “24VAC” and the other end to a proper voltage
source.
2014 DESCO INDUSTRIES INC.
Employee Owned
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Website: Desco.com
Figure 3. Installation method #1 of the Multi-Mount
Continuous Monitor
Screw allows ground cord to be
bolted to mat; keeps cord from
disconnecting.
or
10mm snaps need to pierce and clinch
bottom side of mat. Snaps need to be
12 to 72 inches apart
Worksurface Mat
Power Adapter
Connection
Figure 4. Installation method #2 of the Multi-Mount
Continuous Monitor
3. Install Screws and Washers or Push and Clinch snaps 12
to 72 inches apart from each other on the work surface
mat. Make sure that they pierce and clinch the bottom
side of the mat.
Figure 5. Mounting hole locations on the Multi-Mount
Continuous Monitor (all dimensions are in inches)
2X .188"
3.50"
3.87"
.90"
2.08"
相关PDF资料 |
PDF描述 |
|---|---|
| 19230 | MONITOR DUAL WORKSTATION 120V |
| 19232 | MONITOR W/SPLIT REMOTE MOD 120V |
| 19240 | WRISTSTRAP TESTER 9V OPERATION |
| 19245 | TESTER LOW RESISTANCE |
| 19253 | TESTER COMBO WS&FS W/ PLATE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 19-228 | 制造商:Akro-Mils 功能描述:28 Drawer Series 1900 Modular Cabinets |
| 19228 010250 | 功能描述:多芯电缆 16AWG 2C UNSHLD 250ft SPOOL BLACK RoHS:否 制造商:Alpha Wire 导体数量:3 线规 - 美国线规（AWG）:16 绞合:19 x 29 屏蔽:Shielded 长度:100 ft 电压额定值:600 V 外壳材料:Polytetrafluoroethylene (PTFE) 绝缘材料:Polytetrafluoroethylene (PTFE) 类型:Communication and Control |
| 19228-0030 | 功能描述:折皱器 ATP-301 TAPE PRESS RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 19228-0059 | 制造商:MOLEX 功能描述: |
| 19228-0068 | 功能描述:手工工具 RATCHET INDEX CYLIND DER ASS’Y (23195-01) RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
发布紧急采购，3分钟左右您将得到回复。