参数资料
型号: 19228
厂商: Desco
文件页数: 4/5页
文件大小: 0K
描述: MONITOR CONT MULTI-MOUNT
标准包装: 1
类型: 工作站监视器
使用: 工作面,腕带监视
特点: 连续监视,NIST 可追溯,停放按扣,单芯系统
电源类型: AC 适配器
包括: AC 适配器,证书,软线,五金件
其它名称: 16-1163
TB-3054 Page 4 of 5
2014 DESCO INDUSTRIES INC.
Employee Owned
Operation
When the Multi-Mount Continuous Monitor is installed to
an ESD protective worksurface and grounded via a power
cord, the green WORKSURFACE GROUND LED and red
OPERATOR GROUND LED should be illuminated. The
monitor takes 6 seconds to activate its alarm circuitry when
the operator is first plugged in.
The custom AC adapter connects the outlet ground to
the barrel on the output plug. This is used to supply the
Monitor with ground.
The worksurface resistance is measured between the two
cords installed to the mat worksurface.
USING THE MONITOR
1. Plug a wrist strap cord banana plug into the
monitored banana jack on the front of the unit. This
automatically activates the selected operator
channel. The red operator LED should turn on.
2. Remove the charges from your body by making
contact with a properly grounded ESD worksurface.
Snap the cord to the wristband, and fit it snugly onto
the wrist. This should silence the audio and cause
the LEDs to switch from red to green. If this does
not happen, check the coil cord for continuity or
damage. Examine the wrist strap and confirm
that it has a secure fit. If you have dry skin, apply
an approved dissipative hand lotion such as Menda
35666 Reztore ESD Hand Lotion. When leaving
the area, a person can take the coil cord along or
leave it attached to the monitor in park position.
NOTE: Removing the banana plug from the monitor’s
operator jack will disable the audio alarm.
It is recommended that you use the Park Snap rather
than continuously removing the banana plug from
its jack. Doing so will increase the life span of the
operator jack. If your process requires the constant
insertion and removal of the banana plug, please
contact your Desco Representative for alternate
solutions.
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Website: Desco.com
Figure 6. Using the Multi-Mount Continuous Monitor
Maintenance and Calibration
The Multi-Mount Continuous Monitor is solid state and
designed to be maintenance free. It is calibrated to NIST
traceable standards. There are no user adjustments
necessary. Because of the wave distortion sensing nature of
the test circuit, special equipment is required for calibration.
We recommend that calibration be performed using the
Desco 98220 Single-Wire Monitor Calibration Unit. It is a
convenient product which allows the customer to perform
NIST traceable calibration on continuous monitors. The
98220 is designed to be used on the shop floor at the
workstation, virtually eliminating downtime, verifying that
the continuous monitor is operating within tolerances. Per
ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding
Guidance, “Personnel should check constant monitoring
devices (when used) to ensure that they are functional and
operating before ESDS products are handled. In addition,
constant monitoring devices should be functionally checked
periodically to ensure that they are operating as designed.”
相关PDF资料
PDF描述
19230 MONITOR DUAL WORKSTATION 120V
19232 MONITOR W/SPLIT REMOTE MOD 120V
19240 WRISTSTRAP TESTER 9V OPERATION
19245 TESTER LOW RESISTANCE
19253 TESTER COMBO WS&FS W/ PLATE
相关代理商/技术参数
参数描述
19-228 制造商:Akro-Mils 功能描述:28 Drawer Series 1900 Modular Cabinets
19228 010250 功能描述:多芯电缆 16AWG 2C UNSHLD 250ft SPOOL BLACK RoHS:否 制造商:Alpha Wire 导体数量:3 线规 - 美国线规(AWG):16 绞合:19 x 29 屏蔽:Shielded 长度:100 ft 电压额定值:600 V 外壳材料:Polytetrafluoroethylene (PTFE) 绝缘材料:Polytetrafluoroethylene (PTFE) 类型:Communication and Control
19228-0030 功能描述:折皱器 ATP-301 TAPE PRESS RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper
19228-0059 制造商:MOLEX 功能描述:
19228-0068 功能描述:手工工具 RATCHET INDEX CYLIND DER ASS’Y (23195-01) RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool