参数资料
型号: 1996390-1
厂商: TE Connectivity
文件页数: 1/2页
文件大小: 0K
描述: CONN PIN CONTACT GOLD
RoHS指令信息: 1996390-1 Statement of Compliance
标准包装: 1
系列: SMPM
类型: 同轴
引脚或插口: 引脚,中心
触点终端: 焊接
线规: 同轴线缆,0.085"
触点表面涂层:
包装: 散装
配用: A103872-ND - CONN HOUSING 8 POS VITA 67
A103876-ND - CONN HOUSING 4 POS VITA 67
其它名称: A103874
SMPM Floating Panel Mount, Cable Jacks
(Direct Solder Attachment)
1996390- 1, 1996771- 1
Instruction Sheet
408-- 10373
06 AUG 10 Rev B
Washer
Cable Jack
Compression Spring
Stripping Dimensions
Semi--Rigid and Conformable Cables
0.25 [.010] Max Typ
Center
Flat (Radius Optional)
Conductor
Figure 1
1. INTRODUCTION
SMPM Floating Panel Mount Cable Jacks (Direct
Solder Attachment) shown in Figure 1 are designed to
be soldered to semi--rigid, conformable, or flexible
coaxial cable with a diameter of 2.16 mm [.085 in.] or
1.19 mm [.047 in.]
The cable jacks are designed to be inserted into a
mounting hole (such as the one in VITA 67, daughter
card module 1996705--3).
2.03 [.080]
80+10 _ Typ
2.03 [.080]
5.33 [.210]
Flexible Cable
Center
Conductor Braid
Figure 2
Outer
Conductor
Jacket
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures and
illustrations are for reference only and are not
drawn to scale.
85-- 90 _
2. DESCRIPTION
The cable jacks consists of a body, compression
spring, retaining washer, and center contact. The
compression spring and retaining washer are used to
secure the part into the module. See Figure 1.
3. ASSEMBLY PROCEDURE
1. Strip the cable to the dimensions shown in
Figure 2.
Figure 3
Cable Center
Conductor
Solder Here
CAUTION
!
DO NOT nick the center conductor of the cable.
Take care not to cut the cable braid.
Figure 4
Cable
2. For flexible cable, tin the cable braid.
3. Shape the blunt end of the center conductor to a
cone between 85 and 90 ? . See Figure 3.
DANGER
To avoid personal injury, make sure to follow all
local practices and safety precautions when
working with soldering equipment.
4. Insert the cable center conductor into the center
contact inside the rear shell of the cable plug until
the cable bottoms. No braid strands should be
exposed. See Figure 4.
5. Holding the cable center conductor in place and
using 60/40 solder, attach the rear shell to the
cable as shown in Figure 4.
4. INSERTING CONNECTOR INTO MODULE
1. Insert soldered cable connector into module
mounting hole from the flange side of the module
bottoming the connector body flange on the
module. See Figure 5.
E 2010 Tyco Electronics Corporation, Berwyn, PA TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111
All Rights Reserved PRODUCT INFORMATION 1-- 800-- 522-- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 2
LOC B
相关PDF资料
PDF描述
1996705-3 CONN HOUSING 8 POS VITA 67
1996705-4 CONN HOUSING 8 POS VITA 67
1996883-4 CONN HOUSING 4 POS VITA 67
1A0835 FUSECLIP FOR 1.6" DIAMETER FUSES
1GBE-PCS-O4-N1 IP CORE ETH PCS 1GB ORT42G5
相关代理商/技术参数
参数描述
1996391 功能描述:可插拔接线端子 PC 6-16/9-G1-10.16 9P HORZ HDR RoHS:否 制造商:Phoenix Contact 产品:Plugs 系列:PTS 端接类型:Spring Cage 位置/触点数量:5 线规量程:26-14 节距:5 mm 电流额定值:10 A 电压额定值:250 V 安装风格: 安装角: 触点电镀:
1996-3B 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP BLUE 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, BLUE, 3M
1996-3G 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP GREEN 3M
1996-3R 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP RED 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, RED, 3M
1996-3Y 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP YELLOW 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, YELLOW, 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, YELLOW, 3M; Connector Type A:RJ45 Plug; Connector Type B:RJ45 Plug; Cable Length - Imperial:9.84ft; Cable Length - Metric:3m; Jacket Colour:Yellow; Cable Assembly Type:Network; Cable Length:3m; Colour:Yellow;;RoHS Compliant: Yes