参数资料
| 型号： | 1996390-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/2页 |
| 文件大小： | 0K |
| 描述： | CONN PIN CONTACT GOLD |
| RoHS指令信息： | 1996390-1 Statement of Compliance |
| 标准包装： | 1 |
| 系列： | SMPM |
| 类型： | 同轴 |
| 引脚或插口： | 引脚，中心 |
| 触点终端： | 焊接 |
| 线规： | 同轴线缆，0.085" |
| 触点表面涂层： | 金 |
| 包装： | 散装 |
| 配用： | A103872-ND - CONN HOUSING 8 POS VITA 67 A103876-ND - CONN HOUSING 4 POS VITA 67 |
| 其它名称： | A103874 |
SMPM Floating Panel Mount, Cable Jacks (Direct Solder Attachment) 1996390- 1, 1996771- 1
408- 10373
!
2. Insert compression spring in module mounting
hole and over connector body from the module
mating face.
3. Place retaining washer into insertion tool
2101595--1 aligning the flats on the tool with the
external flats on the washer.
4. Align the internal retaining washer flats with the
external flats on the connector body using the
alignment slots on the connector flange and on the
insertion tool. See Figure 5.
5. Insert the retaining washer into the module, over
the connector body compressing the spring until
the insertion tool bottoms on the module mating
face.
6. Lock the retaining washer into position by
rotating the insertion tool 90 ? while applying light
pressure on the tool. (The tool will spring back
about 0.51 mm [.020 in.] from the module face
when washer is in proper position. A correct
installation of the retaining washer will result in a
dimension of 3.22 mm [.127 in.] from front of
module. See Figure 6.
CAUTION Safety glasses should be worn when installing
the retaining washer since they are spring--loaded
and could potentially fly out of the module. This
action could inflict eye injury to personnel if the
retaining washer is not properly seated during
installation.
5. REPLACEMENT AND REPAIR
The cable plug is not repairable. DO NOT use any
defective or damaged cable plugs.
6. REVISION SUMMARY
S Updated document to corporate requirements
S Changed “Retaining Ring” to Retaining
Washer” in all instances
S Added text to Paragraphs 4.1, 4.2, and 4.5
S Added new Figure 6
Alignment Slot
Compression Spring
Alignment Slot
Cable
Connector
Flange
Retaining Washer
Insertion Tool
Module Mating Face
Figure 5
3.86 [.152] Wrong
Washer Installation
0.64 [.025] Height Delta
Figure 6
3.23 [.127] Correct
Washer Installation
2 of 2
Tyco Electronics Corporation
Rev B
相关PDF资料 |
PDF描述 |
|---|---|
| 1996705-3 | CONN HOUSING 8 POS VITA 67 |
| 1996705-4 | CONN HOUSING 8 POS VITA 67 |
| 1996883-4 | CONN HOUSING 4 POS VITA 67 |
| 1A0835 | FUSECLIP FOR 1.6" DIAMETER FUSES |
| 1GBE-PCS-O4-N1 | IP CORE ETH PCS 1GB ORT42G5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1996391 | 功能描述:可插拔接线端子 PC 6-16/9-G1-10.16 9P HORZ HDR RoHS:否 制造商:Phoenix Contact 产品:Plugs 系列:PTS 端接类型:Spring Cage 位置/触点数量:5 线规量程:26-14 节距:5 mm 电流额定值:10 A 电压额定值:250 V 安装风格: 安装角: 触点电镀: |
| 1996-3B | 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP BLUE 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, BLUE, 3M |
| 1996-3G | 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP GREEN 3M |
| 1996-3R | 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP RED 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, RED, 3M |
| 1996-3Y | 制造商:VIDEK 功能描述:LEAD CAT6 UNBOOTED UTP YELLOW 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, YELLOW, 3M 制造商:VIDEK 功能描述:LEAD, CAT6 UNBOOTED UTP, YELLOW, 3M; Connector Type A:RJ45 Plug; Connector Type B:RJ45 Plug; Cable Length - Imperial:9.84ft; Cable Length - Metric:3m; Jacket Colour:Yellow; Cable Assembly Type:Network; Cable Length:3m; Colour:Yellow;;RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。