- 您现在的位置：买卖IC网 > Datasheet目录376 > 1SPP-BT-F (Future Designs Inc)KIT DEMO BLUETOOTH Datasheet资料下载
参数资料
| 型号： | 1SPP-BT-F |
| 厂商： | Future Designs Inc |
| 文件页数： | 25/72页 |
| 文件大小： | 0K |
| 描述： | KIT DEMO BLUETOOTH |
| 标准包装： | 1 |
| 类型： | 蓝牙 |
| 频率： | 2.4GHz |
| 适用于相关产品： | BGB203 |
| 已供物品： | 2 个板和 USB 线缆 |
| 其它名称： | 622-1020 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页当前第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页
Philips Semiconductors
UM_1SPP
BGB203 BT 2.0 Serial Port Profile Module User’s Guide
Settings tool. Once the output of EXT_CLK signal is enabled, most other
commands will return error until the output of the EXT_CLK signal is
disabled.
It should also be noted that UART Flow Control (RTS/CTS) cannot be
enabled when enabling the output of EXT_CLK due to the multiplexing of
the GPIO2 pin. If UART Flow Control (RTS/CTS) is enabled and this
mode is enabled, an error will be returned.
Finally, once the correct RXTUN value is determined, it needs to be set
programmed into the Factory settings information, or programmed
dynamically with the Dynamic settings command ( AT+BTSET ). Until the
RXTUN value is programmed into the Factory or Dynamic settings it will
not be used by the 1SPP firmware for Bluetooth operation (once this
command is complete).
Format:
AT+BTRXT=<X>, <Y>
where,
<X> is a single ASCII digit:
0 – disable output EXT_CLK signal on GPIO2
1 – enable disable output EXT_CLK signal on GPIO2
<Y> is either an integer value (0 -255) or a hexadecimal value
(0x00 – 0xFF) which represents the RXTUN value to use. This
parameter is optional when enabling the output of the EXT_CLK
and is ignored when disabling the output of the EXT_CLK
or one of the following to query the current RXTUN calibration mode
value:
AT+BTRXT?
AT+BTRXT
Results:
If a query is performed, the output will be the following format:
+BTRXT: <X>
where,
<X> is a single ASCII Digit:
0 – output of EXT_CLK signal on GPIO2 is disabled
1 – output of EXT_CLK signal on GPIO2 is enabled
Immediately following the above output, the response will be the result
code (either OK or ERROR ).
If a query was not performed (i.e. the test mode was set) then the result
will simply consist of the result code (either OK or ERROR ).
? Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.
Date of release:21 Dec 2005
Published in The Netherlands
相关PDF资料 |
PDF描述 |
|---|---|
| 2.0 X 3.0 X 0.50 | SHIELD RF STD 2 X 3 X .5" |
| 2 INCH-D2-MV-MINI | SENSOR 2" H2O D MV DUAL OS |
| 2000310 | PRESSURE TRANSDUCER MSP SERIES |
| 2008639-1 | LIGHT SCKT 10MM HI INTENST ASSY |
| 2008675-1 | STAR BOARD LED HOLDER/HEATSINK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1SPTG040317 | 制造商:LG Corporation 功能描述:SCREW,TAPPING[TRUSS HEAD] |
| 1SQ-25-GM110 | 功能描述:GRIP MATERIAL 1" SQ BLK 25/PK RoHS:是 类别:胶带，粘合剂 >> 带 系列:GM110 标准包装:1 系列:- 胶带类型:标记 - 印有“无铅区域”字样 胶合剂:- 背衬，载体:- 厚度:- 厚度 - 胶合剂:- 厚度 - 背胶，载体，衬垫:- 宽:1.00"（25.40mm） 长度:360'（109.7m）120 码 颜色:白色字符，绿色背景 使用:标记 温度范围:- 包装:卷 |
| 1SQ-25-GM400 | 功能描述:GRIP MATERIAL 1" SQ BLK 25/PK RoHS:是 类别:胶带，粘合剂 >> 带 系列:GM400 标准包装:1 系列:- 胶带类型:标记 - 印有“无铅区域”字样 胶合剂:- 背衬，载体:- 厚度:- 厚度 - 胶合剂:- 厚度 - 背胶，载体，衬垫:- 宽:1.00"（25.40mm） 长度:360'（109.7m）120 码 颜色:白色字符，绿色背景 使用:标记 温度范围:- 包装:卷 |
| 1SQ-28-8997 | 功能描述:POLY TAPE 1"X1" ROLL OF 28 制造商:3m (tc) 系列:* 零件状态:有效 标准包装:1 |
| 1SR124-100 | 制造商:EIC 制造商全称:EIC discrete Semiconductors 功能描述:FAST RECOVERY RECTIFIER DIODES |
发布紧急采购，3分钟左右您将得到回复。