收藏本站
参数资料
型号： 20-101-1067
厂商： Rabbit Semiconductor
文件页数： 79/160页
文件大小： 0K
描述： MODULE RABBITCORE RCM3305
标准包装： 1
系列： RabbitCore®
模块/板类型： MPU 核心模块
适用于相关产品： RCM3305
其它名称： 316-1113
User’s Manual
19
3.2.1 Use of Serial Flash
3.2.1.1 Onboard Serial Flash
The following sample programs can be found in the SAMPLES\RCM3300\SerialFlash
folder.
SFLASH_INSPECT.c
—This program is a handy utility for inspecting the contents of a
serial flash chip. When the sample program starts running, it attempts to initialize a
serial flash chip on Serial Port B. Once a serial flash chip is found, the user can perform
two different commands to either print out the contents of a specified page or clear (set
to zero) all the bytes in a specified page.
SFLASH_LOG.c
—This program runs a simple Web server and stores a log of hits in
the serial flash. This log can be viewed and cleared from a browser.
3.2.1.2 SF1000 Serial Flash Card
The following sample program can be found in the SAMPLES\RCM3300\SF1000 folder.
SERFLASHTEST.c
—An optional SF1000 Serial Flash card is required to run this dem-
onstration. Install the Serial Flash card into socket J11 on the Prototyping Board. This
sample program demonstrates how to read and write from/to the Serial Flash card.
3.2.2 Serial Communication
The following sample programs can be found in the SAMPLES\RCM3300\SERIAL folder.
FLOWCONTROL.C
—This program demonstrates hardware flow control by configuring
Serial Port F for CTS/RTS with serial data coming from TxE (Serial Port E) at 115,200
bps. One character at a time is received and is displayed in the STDIO window.
To set up the Prototyping Board, you will need to tie
TxE and RxE together on the RS-232 header at J14,
and you will also tie TxF and RxF together as shown in
the diagram.
A repeating triangular pattern should print out in the
STDIO
window. The program will periodically switch flow control on or off to demon-
strate the effect of no flow control.
PARITY.C
—This program demonstrates the use of parity modes by repeatedly sending
byte values 0–127 from Serial Port E to Serial Port F. The program will switch between
generating parity or not on Serial Port E. Serial Port F will always be checking parity,
so parity errors should occur during every other sequence.
To set up the Prototyping Board, you will need to tie
TxE and RxF together on the RS-232 header at J14 as
shown in the diagram.
The Dynamic C STDIO window will display the error
sequence.
J14
TxE RxE GND TxF RxF 485+ GND 485
J14
TxE RxE GND TxF RxF 485+ GND 485
相关PDF资料
PDF描述
046232116015800+ CONN FFC/FPC 16POS 1MM VERT SMD
046232108103800+ CONN FFC/FPC 8POS 1MM R/A SMD
345-030-521-202 CARDEDGE 30POS DUAL .100 GREEN
345-030-521-201 CARDEDGE 30POS DUAL .100 GREEN
345-030-520-804 CARDEDGE 30POS DUAL .100 GREEN
相关代理商/技术参数
参数描述
20-101-1068 功能描述:模块化系统 - SOM RCM3315 MODULE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1087 制造商:Digi International 功能描述:RCM3365 RABBITSYS - Bulk 制造商:Digi International Inc 功能描述:BOARD PROTO RCM3365 RS232 制造商:Rabbit Semiconductor 功能描述:RCM3365 Rabbit Sys
20-101-1093 功能描述:模块化系统 - SOM RCM4110 RABBIT CORE MODULE RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1094 功能描述:模块化系统 - SOM RCM4000 Coremodule RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-1095 功能描述:模块化系统 - SOM BL2600 XD HOT SWAP 10/100 RoHS:否 制造商:Digi International 外观尺寸:ConnectCore 9P 处理器类型:ARM926EJ-S 频率:150 MHz 存储容量:8 MB, 16 MB 存储类型:NOR Flash, SDRAM 接口类型:I2C, SPI, UART 工作电源电压:3.3 V 最大工作温度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*