参数资料
| 型号： | 2065883-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 18/21页 |
| 文件大小： | 0K |
| 描述： | CONN RCPT 60POS 6ROW RT ANG HM-Z |
| 特色产品： | Z-Pack HM-Zd Plus |
| 标准包装： | 20 |
| 系列： | Z-PACK HM-Zd |
| 连接器用途： | 子板 |
| 连接器类型： | 插座，母形插口 |
| 连接器类型： | 高速 |
| 位置数： | 90 |
| 加载位置的数目： | 全部 |
| 间距： | 0.098"（2.50mm） |
| 行数： | 6 |
| 列数： | 10 |
| 安装类型： | 板边缘，通孔，直角 |
| 端子： | 压配式 |
| 触点布局，典型： | 60 信号，30 接地 |
| 特点： | 屏蔽 |
| 包装： | 管件 |
| 额定电流： | 0.600A |
| 材料可燃性额定值： | UL94 V-0 |
| 工作温度： | -65°C ~ 105°C |
| 额定电压： | 250V |
| 配套产品： | A104057-ND - CONN HEADER 60POS VERT 6ROWS T/H |
| 其它名称： | A104050 |
114-- 13059
3.9. Replacement and Repair
NOTE
i
To ensure plated through--hole integrity, connectors should only be replaced no more than two times or a max of three
insertions per pc board. Tools for removing connectors from pc boards are provided in Section 5, TOOLING.
A. Pin Header
In cases where only signal pin contacts are in need of replacement, pin header assemblies can be
repaired without removal from the pc board. For ground blade repair, the entire pin header must be
removed from the backplane and replaced with a new pin header.
B. Receptacle
Receptacle construction does not allow for replacement of individual contacts or shields. Damaged
receptacles must be completely replaced. Receptacles can be repaired by removing and replacing only the
damaged connector module.
4. QUALIFICATIONS
Z--PACK HM--Zd Connector Systems are Recognized by Underwriters Laboratories Inc. (UL) in File E28476,
Vol. 54.
5. TOOLING
Tooling part numbers and instructional material packaged with the tooling are given in Figure 13.
NOTE
i
Tooling engineers have designed machines for a variety of application requirements. For assistance in setting up
prototype and production line equipment, contact your representative or call the TOOLING ASSISTANCE CENTER at
the number at the bottom of page 1.
5.1. PC Board Support
A pc board support must be used to prevent bowing of the pc board during the seating of a connector onto the
board. It should have a flat surface with holes or a channel wide and deep enough to receive any contacts that
may protrude below the pc board surface during seating of the connector.
5.2. Seating Tools
Seating tools have been designed to push on the contacts and seat the connector on the pc board. The tool
will prevent contacts from backing out of the housing and prevent damage to the housing. The seating tool
must be used with application tool or power unit.
5.3. Power Units
Power units are automatic or semi--automatic machines used to assist in the application of a product. These
power units supply the necessary force onto a seating tool used to to seat the connector onto the pc board.
NOTE
For application assistance concerning proper sizing of power units, contact the Automation Group at (215) 657--6202.
i
5.4. Arbor Frame Assembly
Manual arbor frame assemblies are used to exert a downward force onto a seating tool used to seat the
connector onto the pc board.
5.5. Extraction Tools
Extraction tools and removal tools are designed to remove individual contacts from the connector or pc board,
or housings from the pc board without damaging any other components.
5.6. Insertion Tools
Insertion tools are designed for inserting individual contacts into the connector or pc board, and seating tools
are designed for seating guide pins and modules or connector assemblies onto the pc board without damaging
or touching other components.
18 of 21
Rev M
相关PDF资料 |
PDF描述 |
|---|---|
| 207306-1 | CONN RCPT KEYING POS 1 RACK&PNL |
| 207437-9 | CONTACT SKT 22-28AWG CRIMP GOLD |
| 207438-8 | CONTACT PIN 22-28AWG CRIMP GOLD |
| 207595-5 | CONN RCPT W/FEMALE JACKSCREW |
| 207596-3 | CONN PLUG 106POS W/MAL JACKSCREW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 206-5883-2 | 制造商:MACOM 制造商全称:Tyco Electronics 功能描述:ASSEMBLY, Z-PACK HM-ZD PLUS |
| 2065-8-9 | 制造商:Kings Electronics 功能描述:BNC Coaxial Connector 制造商:Kings Electronics 功能描述:RF/COAXIAL, BNC PLUG, STR, 75 OHM, CRIMP; Series:-; Connector Type:BNC Coaxial; Body Style:Straight Plug; Coaxial Termination:Crimp; Impedance:75ohm; Coaxial Cable Types:Belden 7731A, 8213; Contact Material:Brass; Frequency Max:3GHz ;RoHS Compliant: Yes 制造商:Kings Electronics 功能描述:Conn BNC PL 0Hz to 3GHz 75Ohm Crimp ST Cable Mount Gold |
| 2065903-1 | 制造商:TE Connectivity / AMP 功能描述: |
| 20659105 | 制造商:BURNDY 功能描述: 制造商:MILITARY STANDARDS PROMUL 功能描述: |
| 20659-105 | 制造商: 功能描述: 制造商:undefined 功能描述: |
发布紧急采购，3分钟左右您将得到回复。