参数资料
| 型号： | 24AA014H-I/MS |
| 厂商： | Microchip Technology |
| 文件页数： | 8/28页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 1KBIT 400KHZ 8MSOP |
| 产品培训模块： | I2C Serial EEPROM |
| 标准包装： | 100 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 1K (128 x 8) |
| 速度： | 100kHz，400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 管件 |
| 产品目录页面： | 1444 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
24AA014H/24LC014H
5.0
DEVICE ADDRESSING
FIGURE 5-1:
CONTROL BYTE FORMAT
A control byte is the first byte received following the
Start condition from the master device (Figure 5-1).
Read/Write Bit
The control byte consists of a four-bit control code; for
the 24AA014H/24LC014H this is set as ‘ 1010 ’ binary
for read and write operations. The next three bits of the
Control Code
Chip Select
Bits
control byte are the Chip Select bits (A2, A1, A0). The
S
1
0
1
0
A2
A1
A0 R/W ACK
Chip Select bits allow the use of up to eight 24AA014H/
24LC014H devices on the same bus and are used to
select which device is accessed. The Chip Select bits
Slave Address
in the control byte must correspond to the logic levels
on the corresponding A2, A1 and A0 pins for the device
to respond. These bits are in effect the three Most
Significant bits of the word address.
Start Bit
5.1
Acknowledge Bit
Contiguous Addressing Across
The last bit of the control byte defines the operation to
be performed. When set to a ‘ 1 ’, a read operation is
selected. When set to a ‘ 0 ’, a write operation is
selected. Following the Start condition, the 24AA014H/
24LC014H monitors the SDA bus, checking the control
byte being transmitted. Upon receiving a ‘ 1010 ’ code
and appropriate Chip Select bits, the slave device
outputs an Acknowledge signal on the SDA line.
Depending on the state of the R/W bit, the 24AA014H/
24LC014H will select a read or write operation.
Multiple Devices
The Chip Select bits A2, A1 and A0 can be used to
expand the contiguous address space for up to 8K bits
by adding up to eight 24AA014H/24LC014H devices on
the same bus. In this case, software can use A0 of the
control byte as address bit A8, A1 as address bit A9,
and A2 as address bit A10. It is not possible to
sequentially read across device boundaries.
DS22077B-page 8
Preliminary
? 2008 Microchip Technology Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| 11LC161T-I/MNY | IC EEPROM 16K SER IND 8TDFN |
| 11AA161T-I/MNY | IC EEPROM 16K SER IND 8TDFN |
| ABC49DRYI-S93 | CONN EDGECARD 98POS DIP .100 SLD |
| 166291-1 | CONN SOCKET 24-20AWG 30GOLD |
| HMC43DRYS-S734 | CONN EDGECARD 86POS DIP .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 24AA014HT | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1K I2C? Serial EEPROM with Half-Array Write-Protect |
| 24AA014HT-E/MNY | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1K I2C? Serial EEPROM with Half-Array Write-Protect |
| 24AA014HT-E/MS | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1K I2C? Serial EEPROM with Half-Array Write-Protect |
| 24AA014HT-E/P | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1K I2C? Serial EEPROM with Half-Array Write-Protect |
| 24AA014HT-E/SN | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:1K I2C? Serial EEPROM with Half-Array Write-Protect |
发布紧急采购，3分钟左右您将得到回复。