- 您现在的位置：买卖IC网 > PDF目录155699 > 24AA65-SM (Microchip Technology Inc.) 64K 1.8V I 2 C O Smart Serial O EEPROM PDF资料下载
参数资料
| 型号： | 24AA65-SM |
| 厂商： | Microchip Technology Inc. |
| 英文描述： | 64K 1.8V I 2 C O Smart Serial O EEPROM |
| 中文描述： | 64K的1.8VI 2二氧化碳?串行EEPROM的智能 |
| 文件页数： | 7/12页 |
| 文件大小： | 105K |
| 代理商： | 24AA65-SM |
24AA65
DS21056F-page 4
1996 Microchip Technology Inc.
2.0
FUNCTIONAL DESCRIPTION
The 24AA65 supports a bidirectional two-wire bus and
data transmission protocol. A device that sends data
onto the bus is dened as transmitter, and a device
receiving data as receiver. The bus must be controlled
by a master device which generates the serial clock
(SCL), controls the bus access, and generates the
START and STOP conditions, while the 24AA65 works
as slave. Both master and slave can operate as trans-
mitter or receiver but the master device determines
which mode is activated.
3.0
BUS CHARACTERISTICS
The following bus protocol has been dened:
Data transfer may be initiated only when the bus is
not busy.
During data transfer, the data line must remain
stable whenever the clock line is HIGH. Changes
in the data line while the clock line is HIGH will be
interpreted as a START or STOP condition.
Accordingly, the following bus conditions have been
dened (Figure 3-1).
3.1
Bus not Busy (A)
Both data and clock lines remain HIGH.
3.2
Start Data Transfer (B)
A HIGH to LOW transition of the SDA line while the
clock (SCL) is HIGH determines a START condition. All
commands must be preceded by a START condition.
3.3
Stop Data Transfer (C)
A LOW to HIGH transition of the SDA line while the
clock (SCL) is HIGH determines a STOP condition. All
operations must be ended with a STOP condition.
3.4
Data Valid (D)
The state of the data line represents valid data when,
after a START condition, the data line is stable for the
duration of the HIGH period of the clock signal.
The data on the line must be changed during the LOW
period of the clock signal. There is one clock pulse per
bit of data.
Each data transfer is initiated with a START condition
and terminated with a STOP condition. The number of
the data bytes transferred between the START and
STOP conditions is determined by the master device.
3.5
Acknowledge
Each receiving device, when addressed, is obliged to
generate an acknowledge after the reception of each
byte. The master device must generate an extra clock
pulse which is associated with this acknowledge bit.
A device that acknowledges must pull down the SDA
line during the acknowledge clock pulse in such a way
that the SDA line is stable LOW during the HIGH period
of the acknowledge related clock pulse. Of course,
setup and hold times must be taken into account. Dur-
ing reads, a master must signal an end of data to the
slave by NOT generating an acknowledge bit on the last
byte that has been clocked out of the slave. In this case,
the slave (24AA65) must leave the data line HIGH to
enable the master to generate the STOP condition.
Note:
The 24AA65 does not generate any
acknowledge bits if an internal program-
ming cycle is in progress.
FIGURE 3-1:
DATA TRANSFER SEQUENCE ON THE SERIAL BUS
(A)
(B)
(D)
(A)
(C)
START
CONDITION
ADDRESS OR
ACKNOWLEDGE
VALID
DATA
ALLOWED
TO CHANGE
STOP
CONDITION
SCL
SDA
相关PDF资料 |
PDF描述 |
|---|---|
| 24C040-IP | 4K SPI ⑩ Bus Serial EEPROM |
| 24C040-ISN | 4K SPI ⑩ Bus Serial EEPROM |
| 24C040-IST | 4K SPI ⑩ Bus Serial EEPROM |
| 24C040-P | 4K SPI ⑩ Bus Serial EEPROM |
| 24C040-SN | 4K SPI ⑩ Bus Serial EEPROM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 24AA65T/SM | 功能描述:电可擦除可编程只读存储器 8kx8 - 1.8V Smart RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24AA65T/SMG | 功能描述:电可擦除可编程只读存储器 256x8 - 1.8V Smart Lead Free Package RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| 24ABGNA3.15 | 功能描述:保险丝 24KV 3.15A RoHS:否 制造商:Littelfuse 产品:Surface Mount Fuses 电流额定值:0.5 A 电压额定值:600 V 保险丝类型:Fast Acting 保险丝大小/组:Nano 尺寸:12.1 mm L x 4.5 mm W 安装风格: 端接类型:SMD/SMT 系列:485 |
| 24ABGNA3-15 | 制造商:Cooper Bussmann 功能描述:HV,AIR,UK,24KV,3.15A - Bulk |
| 24AC.1-60C | 制造商:Olympic Controls Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。