- 您现在的位置：买卖IC网 > PDF目录22314 > 2539-SC/UPC (3M)SPLICE FIBRLOK II W/SC-UPC PIGTL PDF资料下载
参数资料
| 型号： | 2539-SC/UPC |
| 厂商： | 3M |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | SPLICE FIBRLOK II W/SC-UPC PIGTL |
| 标准包装： | 12 |
| 系列： | Fibrlok™ II |
| 类型： | 接线头 |
| 技术规格： | 0.25mm ~ 0.90mm 直径线缆，38.1mm 长 |
| 特点： | SC/UPC 包括引出线 |
| 其它名称： | 0-00-51115-22861-2 00051115228612 2539SC/UPC 5111522861 51115228612 80-6113-2240-7 80611322407 |
3.0 Tools and Materials required
1) 3M Fibrlok II Splice Holder 2539
2) Buffer Stripper
3) Scissors (Snips)
4.0 Splicing Set-Up
4) Reagent Grade Isopropyl Alcohol
5) Lint-free Wipes
6) Cleaver
4.1
4.2
The splicing area should be clean, dry and well lit. A
clean, well organized splicing area will improve splice
efficiency and minimize the risk of contamination of
fibers or splices.
Open buffer tubes, expose and clean the fibers per your
company practice.
4.3 Remove the Fibrlok II Splice/Holder from its
protective package.
4.4 Secure the Fibrlok II Splice/Holder 2539
Before proceeding, attach the splice/holder to its final location. If there is not enough space to work, then
attach the splice/holder after completing the splice. Clean surface of dirt and debris with alcohol and a
lint-free cloth. To attach, remove the 3M VHB ? (Very High Bond) Tape release liner (red) and press
the splice/holder base firmly for several seconds onto the surface of its final location.
Note: VHB Tape is not re-positionable.
4.5 Lift the buffer clamps at both ends of the
splice/holder and lift the actuation lever to the “up”
position
5.0 Fiber Preparation
Note: The 3M Fibrlok II Splice/Holder is designed for 900 μ m tight buffer and 250 μ m primary coated
fiber. To splice 900 μ m loose tube, semi-tight, or release layered fiber remove the 900 μ m coating within the
last four inches or more from the fiber end to be cleaved.
5.1 Remove the minimum length of the cable outer jacket
needed to prepare and splice fibers.
5.2 Strip 1.5 to 1.75 inches (38mm to 45mm) of plastic coating
from the fiber using a clean mechanical stripper.
5.3 Clean the bare glass by pulling the fiber through an alcohol
soaked lint-free wipe.
Note: Do not wipe the fibers more than two times, and limit the time that the bare fiber is exposed to the
atmosphere.
5.3 Cleave the fiber to 12.5mm +/- 0.5mm (0.49+/0.02 inches) for both 250 μ m and 900 μ m tight buffer
coated fibers.
Note: Do not clean fibers again after they have been cleaved or allow cleaved ends to contact tools.
相关PDF资料 |
PDF描述 |
|---|---|
| ECS-H1DC475R | CAP TANT 4.7UF 20V 20% 2312 |
| MIC5891YWM | IC DRVR LATCH 8BIT SER IN 16SOIC |
| ECS-F1CE105K | CAP TANT 1UF 16V 20% RADIAL |
| HIP6019BCB | IC REG QD BCK/LINEAR 28-SOIC |
| HIP6018BCB-T | IC REG TRPL BCK/LINEAR 24-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 253-A | 功能描述:罩类、盒类及壳类产品 5.63 x 3.25 x 2.55 Almond RoHS:否 制造商:Bud Industries 产品:Boxes 外部深度:6.35 mm 外部宽度:6.35 mm 外部高度:2.56 mm NEMA 额定值: IP 等级: 材料:Acrylonitrile Butadiene Styrene (ABS) 颜色:Red |
| 253A103A45NA | 制造商:CTS 制造商全称:CTS Corporation 功能描述:Two Axis, Ministick Controller With Optional Momentary Switch |
| 253A103A45NB | 制造商:CTS 制造商全称:CTS Corporation 功能描述:Two Axis, Ministick Controller With Optional Momentary Switch |
| 253A103A50NA | 制造商:CTS 制造商全称:CTS Corporation 功能描述:Two Axis, Ministick Controller With Optional Momentary Switch |
| 253A103A50NB | 制造商:CTS 制造商全称:CTS Corporation 功能描述:Two Axis, Ministick Controller With Optional Momentary Switch |
发布紧急采购，3分钟左右您将得到回复。