参数资料
型号: 4463-TCE20C460-EK
厂商: Silicon Laboratories Inc
文件页数: 39/56页
文件大小: 0K
描述: KIT EZRADIO TEST CARD SI4463 TX
设计资源: 4463-TCE20C460 BOM
4463-TCE20C460 PCB
4463-TCE20C460 SCH
标准包装: 1
系列: EZRadioPRO®
类型: 收发器,ISM
频率: 460MHz
适用于相关产品: Si4463
已供物品:
Si4464/63/61/60
6. Data Handling and Packet Handler
6.1. RX and TX FIFOs
Two 64-byte FIFOs are integrated into the chip, one for RX and one for TX, as shown in Figure 16. Writing to
command Register 66h loads data into the TX FIFO, and reading from command Register 77h reads data from the
RX FIFO. The TX FIFO has a threshold for when the FIFO is almost empty, which is set by the “TX_FIFO_EMPTY”
property. An interrupt event occurs when the data in the TX FIFO reaches the almost empty threshold. If more data
is not loaded into the FIFO, the chip automatically exits the TX state after the PACKET_SENT interrupt occurs. The
RX FIFO has one programmable threshold, which is programmed by setting the “RX_FIFO_FULL” property. When
the incoming RX data crosses the Almost Full Threshold, an interrupt will be generated to the microcontroller via
the nIRQ pin. The microcontroller will then need to read the data from the RX FIFO. The RX Almost Full Threshold
indication implies that the host can read at least the threshold number of bytes from the RX FIFO at that time. Both
the TX and RX FIFOs may be cleared or reset with the “FIFO_RESET” command.
TX FIFO
RX FIFO
RX FIFO Almost
Full Threshold
TX FIFO Almost
Empty Threshold
Figure 16. TX and RX FIFOs
6.2. Packet Handler
When using the FIFOs, automatic packet handling may be enabled for TX mode, RX mode, or both. The usual
fields for network communication, such as preamble, synchronization word, headers, packet length, and CRC, can
be configured to be automatically added to the data payload. The fields needed for packet generation normally
change infrequently and can therefore be stored in registers. Automatically adding these fields to the data payload
in TX mode and automatically checking them in RX mode greatly reduces the amount of communication between
the microcontroller and Si446x. It also greatly reduces the required computational power of the microcontroller. The
general packet structure is shown in Figure 17. Any or all of the fields can be enabled and checked by the internal
packet handler.
Preamble
1-255 Bytes
1-4 Bytes
Con fig
0, 2, o r 4
Bytes
Config
0, 2, o r 4
Bytes
Con fig
0, 2, o r 4
B ytes
Con fig
0, 2, or 4
Bytes
Con fig
0, 2, or 4
Bytes
Figure 17. Packet Handler Structure
Rev 1.2
39
相关PDF资料
PDF描述
4463-TCE20B460-EK KIT EZRADIO TEST CARD SI4463 TX
4461-TSQ14D868-EK KIT EZRADIO TEST CARD SI4461 TX
4460-TCE10D868-EK KIT EZRADIO TEST CARD SI4460 TX
4460-TCE10D434-EK KIT EZRADIO TEST CARD SI4460 TX
SI4844-DEMO SI4844 EVAL AND DEMO BOARD
相关代理商/技术参数
参数描述
4463-TCE20C868-EK 功能描述:射频开发工具 4463 20 868 MHz Test Card RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
4463-TCE20C915-EK 功能描述:射频开发工具 4463 20 dBm915 MHz Test Card RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
4463-TCE27F868-EK 功能描述:射频开发工具 4463 27 dBm 868 MHz Test Card RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
4463-TCE30E915R-EK 功能描述:射频开发工具 4463 30 dBm 915 MHz Test Card RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
4463-TCE30E915S-EK 功能描述:射频开发工具 4463 30 dBm915 MHz Test Card RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V