- 您现在的位置：买卖IC网 > PDF目录226111 > 48IMS7-05-9Z (POWER-ONE INC) 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | 48IMS7-05-9Z |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 6.1 W DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 10/14页 |
| 文件大小： | 174K |
| 代理商： | 48IMS7-05-9Z |
REV. JUN 14, 2004
5/14
Input Transient Voltage Protection
In many applications transient voltages on the input of the
converter are always possible. These may be caused for ex-
ample be short circuits between Vi+ and Vi– where the net-
work inductance may cause high energy pulses.
In order to protect the converter a large transient voltage
supressor has been fitted to the input of the IMS 7 types.
Specifications as per table below.
Reverse Polarity Protection at Input
The suppressor diode on the input also provides for reverse
polarity protection by conducting current in the reverse di-
rection, thus protecting the unit. An external fuse is required
to limit this current:
– For 24 IMS 7 a fast 2 A (F2A) fuse is recommended.
– For 48 IMS 7 a fast 1 A (F1A) fuse is recommended.
Inrush Current
The inrush current has been kept as low as possible by
choosing a very small input capacitance. A series resistor
may be inserted in the input line to limit this current further.
Fig. 7
Dimensions for inductor L
Table 3: Built-in transient voltage suppressor
Type
Breakdown
Peak Power
Peak Pulse
Voltage
at 1 ms
Current
VBR nom
PP
IPP
24 IMS 7
53 V
600 W
7.7 A
48 IMS 7
100 V
600 W
4.1 A
Vi+
Vi–
C
L
V+
V–
Module
+
04043
i
11.5
5
10.5
5
0.7
04029
Fig. 6
Example for external circuitry to comply with
IEC/EN 61000-4-5, level 2.
If transients generating currents above the peak pulse cur-
rent
Ipp are possible then an external limiting network such
as the circuit recommended for IEC 801-5, level 2 compli-
ance is necessary.
To achieve IEC/EN 61000-4-5, level 2 compliance an addi-
tional inductor and capacitor should be provided externally
as shown in the figure below. The components should have
similar characteristics as listed in table 9.
To withstand the 150 V transient according to 19 Pfl 1, appli-
cable for 48 IMS 7 types, the same external circuitry with
similar components as for IEC/EN 61000-4-5, level 2 com-
pliance can be used.
Table 4: Components for external circuitry to comply with
IEC/EN 61000-4-5
Circuit Ref.
24 IMS 7
48 IMS 7
L
330
H, 0.42 , 0.6 A
330
H, 0.42 , 0.6 A
TDK TSL1110-331KR55 TDK TSL1110-331KR55
C
68
, 63 V, 85°C
68
F, 100 V, 85°C
1 A/Div.
10
s/Div.
04030
0
1
2
3
4
Fig. 8
Typical inrush current at Ui nom, Po nom versus time
(48 IMS 7) measured according to prETS 300132-2 (Ver-
sion 4.3)
相关PDF资料 |
PDF描述 |
|---|---|
| 48IMS25-15-9 | 1-OUTPUT 24 W DC-DC REG PWR SUPPLY MODULE |
| 40IMX15-05-9RZ-G | 1-OUTPUT 12.8 W DC-DC REG PWR SUPPLY MODULE |
| 40IMX7-15-15-9C | 2-OUTPUT 7.2 W DC-DC REG PWR SUPPLY MODULE |
| 40IMX7-03-9 | 1-OUTPUT 5 W DC-DC REG PWR SUPPLY MODULE |
| 40IMX7-1212-7C | 2-OUTPUT 7.2 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 48IMS7-12-12-9 | 功能描述:CONVERT DC/DC 2X 12V 7W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:* 标准包装:5 系列:* |
| 48IMS7-12-9C | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:7 Watt DC-DC Converters |
| 48IMS7-15-15-9 | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:7 Watt DC-DC Converters |
| 48IMS7-15-9C | 制造商:POWER-ONE 制造商全称:Power-One 功能描述:7 Watt DC-DC Converters |
| 48IMS7-24-24-9 | 功能描述:CONVERT DC/DC 2X 24V 7W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:* 标准包装:5 系列:* |
发布紧急采购，3分钟左右您将得到回复。